Phil from Alabama wanted to know how he could be more productive with his new rotary table. So the Answer Man took the opportunity to introduce us to the line of fixturing accessories that's available for Haas rotary tables.
If you've got a Haas rotary table already, click on this link to check out all the fixturing accessories we've got to make your rotary even more productive. https://parts.haascnc.com/haasparts/e...
If you enjoyed this video, please hit the like button and share it with a friend who'll find it helpful . . . and thanks! Follow Haas: Facebook – / haasautomationinc Instagram – / haas_automation Twitter – / haas_automation
AI Generated·May contain errors
Now Haas has a number of products to help make your rotary system and machining in general
much more productive. So many in fact that people can get confused.
And that's probably what Phil from Alabama had in mind when he wrote this letter.
I recently picked up a Haas HRT-210 rotary table because I have a part that needs multiple setups.
Now I know I want to reduce my cycle time and I want to reduce my handling time
but figuring out how to best fixture my part really has me scratching my head.
So Phil there's a lot of ways to hold a part on a rotary. You could do something really simple
like mount your part directly to the platter face and then use t-nuts and clamps and hold it.
But that only works if you're doing one part at a time otherwise every time you change the part
you've got to indicate it in. You could also use a vise using the t-slots and some t-nuts
and as long as you have a stop you have a very repeatable setup.
But again you're only doing one part at a time so it's not ideal.
Now here are some of the options that Haas has to offer.
Let's start with the quick change system.
This system allows you to load and unload easily cubes or plates
using this air ratcheting system and because we have precision locators
that means every time you load your cube or your plate
you can be sure that the location will be spot on every time.
Want to put features on all six faces? Machine the first three faces on each part.
Stop. Flip and rotate each part. Now finish up the three remaining faces.
And there you go. Four parts each with all six faces machined.
Or let's say you're machining the same part on all four sides with all the same features.
So I take off my finished parts. I want to keep the spindle turning as much as possible
so I'm going to unload these later. Let's get rid of those and now I've got raw material on this one
and I'm ready to go. No machine downtime. Now the quick change plate works the same way but
it allows you to put a larger part or maybe even a bunch of small parts on one or both sides of
the plate. So what can you do with it? Well you could do something like this. You can drill and
tap some holes and mount a vise to one side or as we've done here if you want to hold a bunch of
parts drill and tap several holes and mount some low profile clamps here. Now if you have larger
parts you might consider our block system. This is just like the cube only longer. Now it's easy
to mount. You bolt it directly to the platter and it's supported by an a-frame. We have a 12 inch
and a 20 inch depending on how long your parts are. Now this is the 20 inch block. You could of
course machine the block itself or mount a vise or multiple vices maybe one on each side
or mount a whole bunch of parts using those low profile clamps we saw earlier.
You could machine all three sides, take the part off, flip them, then machine the remaining three
sides. That's a great way to keep your spindle running for a really long time between reloads.
Of course you can always get spare blocks, plates, cubes, everything you need and because they're
made by Haas you know you're getting quality parts at a fair price. Phil thanks that was a great
question and if any of you have questions send them to me at answerman at haascnc.com and remember
if you've got questions I've got the answers. Thanks for watching.