How to Replace the Front Bumper Grille on a 2012-2015 Toyota Tacoma | Step-by-Step DIY

Waffle Square
9 followers
In this video I demonstrate how to replace the front bumper grille on a 2012-2015 Toyota Tacoma.
Carparts.com website link: https://www.carparts.com/details/Toyota/Tacoma/Replacement/Bumper_Grille/2012/Base/6_Cyl_4-dot-0L/REPT015326.html
Camera Gear Used:
Canon EOS R6: https://amzn.to/3NfUvwk
Canon RF 15-35 2.8 L: https://amzn.to/3RWE5rI
Rode Wireless Go: https://amzn.to/3evlvcf
Email: [email protected]
Views and recommendations expressed are my opinion based on hands on testing, experience, and results.
I would love to read your comments and video requests in the comments below.
#toyota #tacoma
AI Generated·May contain errors
Hi, I'm Mike. Welcome to my Waffle Square where I obsess about things and you get to benefit from it.
Such as this nasty faded front bumper grill on my daughter's 2012 Toyota Tacoma. In this video
we are going to replace it for this brand new nice dark plastic. Now this will apply to a 2012
through 2015 based on your trim model and I bought this on carparts.com for $42 which I think for a
piece of trim on a vehicle that's this old is a great value. Now that's plus shipping. All right
let's get started. Brought to you by Waffle Square. So just look at how worn out and faded
that lower piece of grill trim is. Especially compared to this top piece it's nice and pretty
and black. So this is what we're replacing today. All right it's very helpful to take a look at the
new piece of trim to get a game plan of what it's going to take to remove it and put our new one on.
First the top row here has these clips. These are very easy to access. You can actually reach
your hand in like you see here or you can come you can lift up the hood and go in from there.
Second you have the bottom row. Those are very easy to pop out. You can just reach in there with
a finger and press a very easy piece of plastic to overcome and push those out of the way. The tough
ones are this center row. So if we look this way you can see you have a plastic piece that comes
in to the actual bumper and then there's this slot. That slot receives these blue clips so
there's going to be five of them to overcome. You can see how they click in and they hold the bumper
and the trim together. So what you're going to need to do is get inside the actual bumper
in between the plastic bumper and the aluminum frame piece that is that the actual protecting
part of the bumper. You're going to need to get in there with a screwdriver press that clip down
and pull it out. All right let's get our bearings. This is the front of the truck. We're heading back
towards the skid plate to assist yourself in getting back in here and removing those blue
clips. It is helpful to remove this this 10 millimeter bolt here right in the center
and then also right here where this piece of trim meets a bumper. If you remove those
then when you grab on to the actual bumper you can see how much play you have to get in there
and find those blue clips. Now they're pretty tight in there but if you
take a little bit of WD-40 or silicone lubricant or something and you spray that area
I found that if you get in with a really long screwdriver you can just get in press them down
and push them out like that. Once that happens you've successfully removed the piece.
All right now let's do the reverse. Hopefully this goes a lot easier than taking it off.
Line everything up. Push it in.
Now I'm going to get those blue clips before I do anything else.
There's one. You have to really squeeze it together right here and slip your hand inside
at the same time to get it tight enough together to clip. There. Nice. There.
Well and there we go. Not technically difficult but definitely tedious. I think the difference
though however from the way the old one looked is dramatic and we're really working to keep this
vehicle looking pretty. Maybe one of the next things we need to do is get rid of that kind of
yellowish looking headlight and buff it out. Something like that to try to keep it looking
new. If you found this video helpful will you please give it a thumbs up. It's really
helpful to the channel. Also please consider subscribing. I work really hard to put together
very efficient content that's automotive related. There's a lot more videos to come.
Leave me a comment down below if there's anything that I missed or if you have any questions on
replacing this. I tried to get in there as close as possible to the various things that needed to
done but I'm happy to answer any questions you have. Until next time, thank you for watching.
