I Restored a Mahogany Dresser with Beautiful Results

Trash To Treasure
3 followers
#transcendfurnituregallery #furniturerepair #diy #furniturerestoration #furnitureflip #furnitureflipping #furnituremakeover #vintagefurniture #antiquefurniture #homedecor #dressermakeover
AI Generated·May contain errors
Hello everybody, welcome back to another video. This is another one of those ugly
duckling challenges. This one is hosted by Cori from Desert DIY. Super talented lady,
super awesome person. She has tons of videos of amazing furniture flips and thrifting tips.
If you end up liking what you see, feel free to subscribe and hit that little notification bell.
This is going to make sure you get a notification every time she posts something.
This is a piece I found on Marketplace for $25 and to be honest, the only reason I paid
anything for it was the hardware. Looking at the outside of the piece,
it's obviously in horrible, horrible condition. This thing has been used and abused. It has
several layers of paint. This is some sort of layer of wallpaper, but this hardware,
the hardware is what made me buy this piece. I can't really see how the drawers are constructed
yet. There's wallpaper in the way. There's no back on the piece and it's a little strange here
on the bottom. I don't know if this used to be another drawer they took out or if it was built
this way. I'm not sure. I'm thinking I might cut it off right about here and add a base,
but before I do anything, I have a feeling about this paint. This looks to be a fairly old piece.
My money is on this being lead paint. These lead test kits you can order on Amazon.
They're super easy to use. All you do is dip the little q-tip looking thing into some vinegar,
it turns mustard yellow, and you rub it on the surface of the paint or finish that you're testing
for 30 seconds. Now, generally, if there's any color change at all, I assume it's lead. This
color, it's a little bit hard to read, so I'm going to do it again in another spot.
Sure enough, there is lead paint on this piece. It's not the end of the world. I've dealt with
lead before, but it is kind of a bummer. I'm going to take this hardware off first to get
this out of the way because no matter what happens with the piece, that hardware I'm keeping.
I absolutely love the patina on this, even the rusty bits. It's just got so much character to it.
I have to figure out a way to preserve that look without allowing the rust to eat away more at the
metal. Do you know what I mean? Some of these old flathead screws can be a little bit hard to get
off. The grooves are often fairly shallow, so sometimes you have to use a little more muscle
to get them out. I'm going to pull out the drawers and get to work on peeling back some of this.
I don't know if it's wallpaper or some sort of... it's probably contact paper, like stuff you would
put on a shelf. Whatever it is, it's sticky, and it's ugly, and it's got to go. I was hoping to
find dovetail joints or nap joinery, something here on the drawer to give me a better indication
of the age, but all I found were nails. I'm kind of getting a better picture of this piece now.
I'm fairly certain this is a homemade job. The wood quality is poor, the construction is poor,
the finish is horrible. It's going to take a lot of work to get rid of this contact paper,
and then the lead paint to boot. It's not an easy decision, and I love a challenge,
but I have to consider this challenge a fail.
So now what do I do? My name is Angie and I refinish furniture. Sometimes I paint and
sometimes I don't, but I always do what I can to save old pieces from the trash.
Welcome to my workroom. So after about 12 hours of stress and feeling sorry for myself
because I wasn't able to flip that little piece that I wanted to, I started to take a look at
what was left in my workroom. Now I'm doing a workroom update. Half of my stuff is already in
a truck. I don't have very many options here, but I did have this mahogany dresser I picked up the
other day. Tons of water damage. It honestly looks like it had been left out in the rain
or near a window maybe where rain was splattering off the sill onto the side of it. There's a broken
leg on the bottom that needs to be fixed. Is this an ugly duckling? No, this is a beautiful piece of
furniture that desperately needs to be refinished, but I don't have time to find another piece before
this challenge video is supposed to air, so this is the piece I'm going to be working on.
This piece is a perfect example of a classic Hepplewhite design, and George Hepplewhite was
actually born in the 1700s. A lot of makers in the late 1800s and even into the 1900s
borrowed from his designs, and this is a very classic look. Normally these have bowed fronts
or serpentine fronts with straight legs or slightly fluted legs, which this one has,
and it also falls in the federal period for furniture. This hardware is fairly typical of
that era as well. This is split the whole length of this foot as well as on the side of the foot.
There's a couple of glue blocks here that have- one has split and the other one has come apart
from the side. I'm going to unscrew all of this, take it all apart, clean up the joints, re-glue
them, and hopefully stabilize this leg as much as I can. You can see here that someone has driven a
couple small finish nails into the leg to try to hold that broken piece on. Please don't do that.
Don't use nails in furniture legs and in dovetail joints on drawers. Glue is your friend, nails are
not your friend. I'm going to be re-gluing these glue blocks in. This side was tight so I just left
it alone and I'll just glue it from the other side. I need to pop that nail out as well.
I want to sand down a bit of the crud and old glue that was on this leg assembly here. I don't want
to sand so much that I ruin the integrity of the fibers because I need these to fit together as
tightly as possible, and if I were to sand them flat there's a good chance that it wouldn't line
up as perfectly as it would otherwise. And there's a tiny bit of movement in this crack,
not a whole lot. I am going to put some glue in it but I'm not too worried about that.
So once I have that cleaned up a bit I'm adding some wood glue all over the joint. I want this
to cover every square inch. I'm going to press these two pieces together. I'm just trying to
push a little bit of extra glue in that crack. There wasn't very much movement there but I'm
still going to put some in and clamp it and see if I can get it to close a little bit more. Wiping
off a bit of the excess glue before I put the clamps on and I will wipe as I go along.
I got this partially glued up and then I realized I forgot to put the sideways pressure on that
crack. So I'm just changing up my clamping arrangement here, making sure that there is
pressure on all sides. I took this little chunk off by accident when I was pulling off the leg
assembly so I'm just going to give that a little dab of wood glue and then use some painter's tape
actually to tape it in place. It's obviously too small to clamp. Once that has had a chance to dry
I'm going to pull the tape off. I want to keep the clamps on the leg assembly a little bit longer
so I'm going to start scraping off this old finish. I'm using a carbide tipped scraper for this. The
finish, because it's so damaged, honestly is coming off really easily. It would be a waste of time,
money, and would be a mess to use a chemical stripper on it. I don't need to, I can just
scrape it. I got down to the edge of this leg and I noticed another repair and there was a tiny bit
of movement there. I wasn't comfortable with leaving it that way so I actually tried to pry
off any parts that weren't perfectly glued down and you'll see that a little piece pops off, not
the whole thing. So basically this section on the right side the glue had held really well, not so
much on the left, so I'm re-gluing that side. It's going to make it nice and strong. It's not like it
would fall off but I just I couldn't redo this piece and not address that movement. And back to
scraping. This piece is constructed of several different types of wood and the mahogany sections
themselves, there's actually a couple of different types of mahogany which is interesting. This
band that I'm scraping right now is actually a piece of solid mahogany. These middle sections
that I'm scraping in this clip are not mahogany at all. The feet are not mahogany at all and
everything else is mahogany veneer but not the same mahogany veneer. The top is slightly different
from the sides and both are slightly different from the mahogany veneer on the drawer front so
we're going to have a lot of different wood tones going on here and it was actually because of this
and at this point because of the repairs on the feet I did make the decision to paint part of this
piece. So don't freak out, I'm not painting the whole thing. It's going to be beautiful, it's
going to be classic looking, but this old gal has some war wounds and I definitely want to keep the
integrity of the piece and save as much of the wood as I possibly can. Paint is not always the
enemy for furniture. In some cases, paint actually preserves the wood. That's why they've been doing
it for hundreds of years. Painting furniture is not a new thing but that said, I personally,
my own opinion, I personally don't believe every piece needs to be painted or should be painted
so I don't take these decisions lightly when I do decide to paint a piece or part of a piece.
I know there are wood purists out there who don't believe there should be paint on any type of wood
furniture and I don't entirely agree with that. Not all wood is created equally and sometimes
painting a piece can really enhance sections of the piece. This channel falls into sort of a strange
category because I'm not entirely a wood purist and I'm not entirely a furniture painter. I do both
and I base each decision entirely on the piece in front of me. The joint here at the top on both
sides had cumblies so I applied some wood glue there. I left this clamped up for an entire day.
I didn't have clamps long enough so I did my favorite little trick where I put them back to back.
While those were drying, I went ahead and started to scrape and sand the rest of the dresser.
I found this odd little spot at the bottom. It was actually a dowel
so someone must have made a repair at one point with a different type of wood.
It's like archaeology. Some of these furniture makeovers. I love that. I love learning about
the history of each piece by taking it apart. I decided to just straight up sand the top rather
than scraping it. The finish was so thin anyway. You can see quite a bit of discoloration from the
water stains and then this strange white mark right here. I'm going to get a better look at
that here in a minute. I couldn't figure out at first exactly what that was so I put some
mineral spirits on. Gave it a very light scrub and I think I know what's going on here.
So I think what happened here is that at some point it was a very dark stain. Maybe a burn? I
don't know but somebody tried to fix it by sanding it and they sanded through the mahogany veneer on
the top into the next layer. That's unfortunate. I don't have any mahogany veneer that would match
this so I'm gonna have to do a little bit of art to try to camouflage that as much as possible.
I gave the outsides of the drawers of fresh sand as well as the runners on the bottom. I like to
do that. It just makes them nice and smooth and ready to go. Because these drawers are curved
on the front I didn't want to use a power sander so I'm choosing to hand sand. There was a little
piece of the trim on the side of this drawer that was extremely loose so I just popped it off. It
was barely hanging on, trust me, and I just added some glue and taped it in place with some red
artist tape so that it would stay still while I clamped it. I'm using fusion mineral paint in
the color coal black to do this little section at the top, the base, the middle sections in between
the drawers, as well as that little decorative trim around the drawer faces themselves. That's
all that's getting painted. Everything else is going to be wood grain. I'm using Odi's safer
solvent which is kind of an alternative to mineral spirits and it smells delicious by the way, just
like all the other Odi's products. I'm using this to number one clean the sanding dust off the piece
but also so that I can have a fresh surface to try and blend this previous repair in. The first
I tried, and I tried about 15 things, was some gel stain and the color just wasn't quite right
so I used a little bit more of the safer solvent to wipe it off and I tried a different type of
stain and color. There were sections that looked promising here but neither stain was absorbing
into that middle substrate layer which is usually saturated with glue so that's not overly surprising.
I did however use some of that first gel stain on the edge here at the front. The top is actually
a different type of wood with mahogany veneer over top of that so I needed that middle section to
match the top which I'm only going to be using Odi's oil on. So my third attempt at dealing with
this patch. This would be so much easier by the way if I just had mahogany veneer but I don't.
So these are pre-mixed furniture pigments kind of like paints and this first color I'm using
is actually the mahogany and it's I don't like it it's way too dark so I end up switching over to
the walnut one which is a little bit closer to the wood tone on here and I'm trying a couple of
different blends of colors trying to feather it out some but what happens a lot when you're trying
to fill a big area like this it becomes very opaque and very dense whereas the wood has a lot
of depth and clarity to it so it's not easy to do and I went in with a little bit of black to try to
mimic the wood grain and the flex that you see in the rest of the wood and in this shot here it
actually doesn't look too bad but you'll see in a minute it's bad. I've actually done this before
with these exact products and had great luck it honestly just depends on the piece. So before I
get upset and just wipe that off which I do um I decided to go ahead and apply the odies oil just
to see how it looks with it like obviously against the bare wood it looks extremely dark and terrible
the odies oil is non-toxic it's food safe it smells great it's an amazing product that goes
on like an oil but dries as a hard wax it's not a typical oil finish but even with the extra
richness that the odies gives this little painted area is way too dark it looks terrible
terrible. I decide to walk away for a short bit from the top start taping up the drawers like I
said I wanted to paint that little trim around the outside in black and then I'm applying the odies
oil to the mahogany on the front. As I mentioned in the beginning the mahogany veneer on these
drawer fronts are different than the mahogany on the top and also on the sides of the piece
they're all slightly different species slightly different colors and combined with the black paint
it's going to give this piece a really unique look. I'm using fusion mineral paints beeswax
hemp oil combo to seal the paint and it does give it a little extra protection the fusion
mineral paint does have a built-in top coat but I like to use it because it adds a little bit more
depth and luster and if you look at the section that's painted just above the base here you can
see there is a huge difference in the color once you apply this stuff. I'm also adding odies oil
to the sides of the piece and there was one little section of missing trim right there that I forgot
to do before I painted so I sanded off underneath added some wood epoxy I'm just shaping it here and
once it's dry I'll sand it down paint it and then seal that too. I do like some patina on brass I
just want to shine this up a little bit so I'm using a bit of bar keeper's friend and I'm not
trying to polish this to the point it looks brand new all I want to do is make it look a little less
stingy so that looks a bit better and our lightly polished one here is on the right. I also decided
to give the inside of these drawers a little refresh so I'm just doing a really light hand
sanding and then wiping that off with a damp towel and then using some hemp oil. The drawers
were pretty dull and thirsty and this is just going to make them look absolutely beautiful
and nourish them. I get asked a lot if this will stain clothes basically what I do is I wipe this
all on let it soak in and then I wipe all of the excess off with a rag or a shop towel and I have
never had any issues with residual oil it basically cures dry to the touch and isn't going
to affect your clothes. Now between the last attempt at that terrible spot on the top and the
one I'm about to show you I think I went through about 15 different processes with different stains
and paints I even tried here mixing my own custom sort of burnt sienna color and again this is kind
of where having an art background comes in handy so what I opted to do this time around was go for
a light tone first and because I am a professional artist and have been for years I have professional
art markers and I decided to pull them out. I wasn't having much luck with the pre-mixed colors
so I basically used my art markers to create new wood grain and again it's not perfect
I think it's about as good as I'm going to get with the situation I have here I just really
really did not want to paint this top so even if this isn't perfect it's still way better than
painting it in my opinion. So I guess in short I failed my initial ugly duckling challenge with
that green piece it was honestly just it was too far gone the quality of workmanship wasn't there
the quality of materials was not there and like I said in the beginning if you're doing this for a
living sometimes you just you have to know when to walk away and unfortunately I did have to walk
away from that one. Thankfully I did have this other piece in my workroom which is currently
a mess because I'm in the middle of renovating it so even though I didn't complete the initial
challenge I did I think turn something into a beautiful swan. This poor water damaged piece
now has a new life and I'm excited to show it to you. Brace yourselves it's quite a transformation
thank you so much for watching I will see you in the next video.
