Making 90s Oak Furniture Look High-End Again

Trash To Treasure
3 followers
In this video, I am transforming 2 outdated oak nightstands!
💰Let’s Talk Numbers💰
Cost: $20
Materials: $30
Sold: $
Profit: $
#TrashToTreasure #Upcycling #DIYProjects #ThriftFlip #FurnitureMakeover #ZeroWaste #RecycledArt #EcoFriendly #FurnitureFlip #WhiteOakMakeover #GoodwillFinds #WoodRefinishing #SideHustleDIY #SatisfyingRestoration #ModernFurnitureFlip
AI Generated·May contain errors
Video Summary
AI GeneratedThe video showcases the transformation of two $10 oak nightstands into high-value modern furniture. By modifying the structure, sanding the wood, neutralizing the color, and adding new hardware, the creator turns a $20 investment into pieces projected to sell for $350, highlighting the profitability of furniture flipping through market research and craftsmanship.
I picked up this pair of very dated oak nightstands
for just $10 each at Goodwill,
and I think they are hiding a surprisingly modern design.
They have these really cool rounded edges,
tons of oak, and unfortunately,
some pretty bad veneer damage.
But I have an idea that I think
will completely transform them, so let's get started.
So there's no hardware on this set of nightstands,
so we can go straight into cleaning.
I'm gonna be using Simple Green
to get all of the dirt and grime off of there.
Oils and stuff get built up into these wood furniture pieces,
especially when there's no hardware.
There's gonna be a lot of buildup underneath here
because this is where you open and close the drawers.
Plus, there's just some gunk on top.
I like to do all of that for a clean slate.
Don't know where these have been.
Plus, it helps prevent my sander
from gunking up so much when I do the sanding portion.
And then I'll also be labeling the drawers
to make sure that I know exactly where they go
when I'm putting everything back in.
So now that everything's clean,
I wanna show you the first step that I'm gonna take
in order to start making these a little bit more modernized,
and that is to kind of modify the base a little bit.
I've done this several times
to where I can cut the base off to add legs
or add a base that I create myself out of the red oak.
This time's gonna be a little bit different.
We're just kind of gonna be eliminating some of the aspects
but keeping other aspects.
So for this one,
I'm gonna be using a combination of my drill and my jigsaw
to basically just cut out this bottom panel right here.
This is one big piece that extends all the way up here
and this is kind of decorative.
But since this has to do with support,
I don't wanna cut it all the way out
and remove the whole thing.
So I'm just going to cut at this bottom line
and that way we'll kind of have an open bottom
and it'll be a little bit more modern
and kind of off the floor with legs.
Okay, here's what we're looking like now.
We've got this big opening under here.
I am liking that concept.
I think up here on the table without the drawers in it,
it's like a little bit too open,
but with the drawers in and when it's down on the floor,
I think it'll be perfect as far as design goes.
Like you won't be able to see the insides here.
So next I am going to begin sanding.
I wanna do a raw wood look on this piece,
on these pieces, like a white oak type.
So we're gonna sand all of the finish back.
I think it should come off pretty easily with my sander
and then we'll kind of go from there.
I may need to do some acetone in some of the crevices,
but most of it should be able to be sanded off
pretty simply with 120 grit.
A few months ago, I installed the Glacier Fresh U03
reverse osmosis system into my kitchen.
And now that I've had a few months to sit with it
and use it throughout my day-to-day life,
I wanted to just give you an update
on how much I am still absolutely loving it.
And not just me, but the whole family.
I'd say one of the best things
about installing the reverse osmosis system right here
is just the pure convenience.
We can grab our water bottles
and get these filled up right here at the sink
with clean water that actually tastes good.
Before we were using the water filtration system
in our fridge that comes like built in
and you have to change out the filters pretty often.
And a lot of the times that water started tasting like dirt
within about a month or so.
And like I said, it's already been several months
since I installed this in our house.
And I have not only been loving it
for filling up water bottles
and drinking straight out of the tap,
but also I've been starting to utilize it
when I am cooking about to boil water.
That way we have clean water
that we're kind of eating from as well.
And not only cooking,
but also filling up the coffee machine.
I've been using the reverse osmosis water
and it just makes everything taste more clean
and honestly just so fresh.
A lot of reverse osmosis systems
have a separate storage tank
that takes up a pretty big chunk of your cabinet
underneath your sink.
But this one has the tank built right into the unit.
So everything stays really compact.
So we still have quite a bit of usable storage space
down here under the sink,
which is really nice to store other cleaning supplies
for the kitchen as well.
The installation was also pretty straightforward.
As you guys saw me a couple of months back,
I installed this all on my own.
It connects to the existing water supply
and the system actually doesn't require
any electricity either.
So there's no pump to plug in
and no power cord under this sink.
And I didn't have to figure out
how to get electricity into this cabinet.
It just uses the water pressure
that's already coming into the house.
I truly can't say enough good things
about the reverse osmosis system.
So if you're in the market for something
or maybe you've never really thought about installing one,
but you are now kind of interested,
I'll link everything down below.
Thanks again to Glacier Fresh
for sending over the reverse osmosis system
and also sponsoring this video.
I've been finding myself wanting to drink more water
because it just tastes that much more fresh
than any other water that I could find
like at stores in water bottles or from my fridge
and especially from the tap.
So drink the good water
and check out the description down below for a link
and get your reverse osmosis system installed today.
Happy drinking.
All of the sanding is finished up.
We got this down to a really, really nice smooth finish
and all of it is oak.
And looking pretty good.
I do have a few spots where there is some veneer
that has chipped off,
which I had showed you at the very beginning.
So we're going to go ahead
and attempt to fix those as best that I can
so that we can kind of hide them a bit better
than just having that exposed particle board.
So whenever you're fixing veneer or any type of wood,
you're going to wanna try to color match it
as best as you can.
And then if need be,
you can use some kind of coloring crayons.
They're not really crayons,
but they're for wood matching exactly.
But we're gonna start with the closest wood filler color
I have, which is white oak.
I've never used this from the bag before,
but it's called Goodfilla
and it's in a bag and it's like a powdery substance.
And I just had it, they sent it to me a while back
and this is white oak color
and this is white oak pretty much.
So hopefully it's gonna match pretty good,
but I'm just gonna kind of mix up a little bit of it.
I don't have a terrible amount of veneer chips,
so we don't need to mix up like a whole lot,
but it says one part liquid to three parts powder.
So I barely put any liquid or any powder in here.
So I just, I'm gonna do like very small amounts
of water to start and then I'll be able to like add more.
I probably just did way too much to start with.
Okay, here we go.
So you've got like a little paste now
and I am gonna go ahead and fill in these veneer spots
that are missing.
We're finally ready to get some real progress done
after all that sanding and repairs.
I am gonna be doing a paint wash
so that we can ultimately keep the white oak look.
Sometimes with wood,
if you just put the clear coat over the top of it,
it can be really orangey or yellow
and pull out those undertones.
So this is a great way to neutralize that
and one color that I love to do that with
is Algonquin from Fusion Mineral Paint
and this is watered down with water.
So I've already got a mixture from a previous project
and now I'm spilling it all over myself.
I've already got a mixture from a previous project in here.
So I am going to go ahead and just brush it on
and then wipe it back with a lint-free cloth.
I also like to just kind of wet my surface a tad bit
in order for the coat of paint wash
to just really be able to soak into that wood really well.
And then what I like to try and do
is when I'm wiping it back,
I do it in the direction of the wood grain.
So that way there's no streak marks
of like dragging the paint the opposite way.
They're all gonna be going the same direction.
Once this dries,
it'll really have that nice white oak look.
And depending on how thick you put your paint wash,
kind of depends on how transparent it is.
This one was pretty watered down.
So if I feel like it needs more before I do the top coat,
I'll absolutely go back and do a second coat.
But for now, this is going to be how it's gonna look
once it dries.
And then I'll kind of make that decision
once they're both completely covered with the paint wash.
Okay, I've made it over to the spray booth here
with the nightstands
and I am going to clear coat everything.
I put a little bit of some barnwood stain
inside of the clear coat
just to give it a little bit of depth,
a little bit of warmth.
I don't wanna change the color much,
but it's kind of gonna act as a little bit
of like a glaze-ish type
where it's not gonna take away from the color,
but it's just gonna let everything breathe a little bit
and like I said, have a little bit of warmth.
It's not gonna be so yellowed
and it's gonna lean more neutralized
because even though I did the paint wash,
sometimes it can still lean a little bit yellow
when that top coat goes on.
So I wanna make sure that we're still staying warm.
So top coat going on now.
I decided that I am going to go ahead
and do hardware on these nightstands.
I toyed with the idea of keeping them no hardware
like they were at the very beginning
and how they were made,
but I have sold a dresser similar to this in the past
and people didn't really love the idea
of not having hardware.
It's hard to see in pictures
that this hardware is kind of like embedded
into the fronts of the drawers
and I think this will just give it
a little bit more interest as well.
I thought about doing it on the lower panel,
but I think ultimately the best look
is going to be on this top little piece right here.
So this is the hardware that I have selected.
It's just some that I had on hand.
I like to grab hardware whenever I see good sales on Amazon
and hardware that I really like.
So I think these are gonna be perfect.
I'm using the Craig XL hardware jig
and this thing is a game changer when it comes to hardware.
There's so many great settings.
I used to use a different one,
but this one is just so much more personalizable
for the specific drawers
and it's just really, really good.
So I've got it all set to my measurements that I need
and I am going to mark the holes.
These nightstands are officially complete.
Let's take a look at what they looked like
when I first picked them up at Goodwill for just $10 each,
which is a super great buy-in for two matching nightstands.
That's $20 and they were in really good condition.
There were a couple of veneer marks that were chipped,
but overall in good condition, working order,
really good bones and just a little bit outdated.
But like I said, I saw the potential in these
and I really wanted to try and lean into
some of the design aspects of the old nightstands,
including the curved sides
and then just modifying the base a little bit
without putting too much money into the project,
but still being able to really modernize down below.
So let me know what you guys think
about the complete transformation.
I feel like even though I didn't do a ton,
these really look like completely different pieces.
I absolutely love them.
This is the type of furniture that I want in my bedroom
whenever I get around to making over that space.
However, I'm not gonna keep these
because I do need larger ones for the scale of my room,
but trust me, if I needed this size,
these would definitely be staying with me.
My favorite part,
and I feel like some of your guys' favorite part
is talking about the numbers of the projects that I work on.
And so the buy-in, $20,
and then really all I used was sandpaper,
top coat, a little bit of stain,
and then the new hardware along with the wallpaper
that I put inside to line the drawers.
All of that comes out to about $50 in total.
The hardware, I had it on hand, but I did the math,
and each piece was about $3.70.
So that's $15 for all four plus the $20,
and then everything else added up to another 15.
So I really kept this a low, low-cost makeover.
Thus, I think I'll be able to get a pretty decent profit
on these nightstands.
I think I'll plan to list them around maybe $350 or so.
Let me know if you think that that's a good price
to get on these.
They are a little bit on the smaller side,
but they're just in super nice condition.
And like I said, again, leaning into the modern furniture,
the things that you could find right now
at Target, Walmart, Wayfair.
I was doing a little bit of research
on what I really wanted these to look like
and kind of what curved furniture is out there
that people can buy at the stores.
And that's a really good tip.
If you're not quite sure which direction you wanna go
with your projects, check out the internet.
See what people are purchasing from the big box stores,
from online, anything like that,
and then try to kind of replicate that.
And don't copy, obviously, put your own flair,
your own touch, but I'll pop up a few different ideas
or designs that I kind of had in my head
when I was creating these.
And that's why I think I can truly get that $350 mark.
Thus, it will give me a $300 profit.
So I love the way that these turned out.
I hope you guys enjoyed this video
and saw just how simple flipping some nightstands can be.
I'll update you when the sale goes through.
Otherwise, I will be back with another video next Thursday.
So be sure and get subscribed down below
so you don't miss an upload.
Thanks so much to Glacier Fresh
for sponsoring today's video.
Again, all of that information
for the reverse osmosis water system
is down below in the description.
You're gonna wanna try it
because it is a game changer for water intake
and just the way that it all tastes.
Thanks so much for watching,
and I'll see you on the flip side.
