This vintage metal cabinet has been through a lot over the decades … grease, rust, layers of wear… but it still has incredible character. The big question is… should I paint it, or preserve the original patina?
In this video, I take you through the process of bringing it back to life: • Degreasing and cleaning the surface • Removing as much rust as possible • Applying a rust inhibitor for long-term protection • Finishing with wax for a subtle sheen • Adding a custom wooden top • Even restoring the old industrial wheels
✨ Don’t forget to like 👍, subscribe 🔔, and share if you enjoy watching these furniture rescue projects — it helps keep more old pieces out of the landfill and gives them a second life!
If you’re into furniture flipping, repairs, or vintage transformations, this one’s for you.
Angie restores a vintage modular metal utility cabinet by deep cleaning grime and rust to preserve its original patina. Instead of repainting, she uses automotive-grade protectors and constructs a custom birch wood countertop with a faux-aged finish, transforming the industrial piece into a functional, cohesive work unit.
I know. I know. Actually, I don't know. I don't know what I'm doing here at all.
This is obviously completely a departure from what I normally work on,
but I've had this in storage for a while. I saw it on Facebook Marketplace a couple years back,
and I just thought it was the coolest thing. I'm not exactly sure where it came from.
I did find some interesting things in the drawers, like this Canadian military patch,
but I also found a piece of paper that suggests that this may have come from somewhere else.
This piece is absolutely filthy. Obviously, you can see there's some surface rust,
a ton of grime and grease, dirt and dust, a bit of residue from old stickers,
and there's a couple of drawers that don't really match the rust.
Now, this was meant to be a modular system with pieces that stack on top of each other,
which is what all those clips are, and you can see we've got three separate sections here. We've got
this lower section that has the wheels, this middle section, which is a slightly different
color, and then the large section on top. But before I know exactly what I'm going to do with
this, I need to get it cleaned up, so let's get started. My name is Angie, and I refinish
furniture. Sometimes I paint, and sometimes I don't, but I always do what I can to save old
pieces from the trash. Welcome to my workroom. So initially, my plan for that was to do something
like this cabinet right here, but the more I got thinking about it, the more I thought that
trying to keep the original paint as much as possible, and you can see it, I mean,
it's pretty rusted, but if I can get that grimy, gross layer of dirt off and kind of get rid of
any loose rust, I'm hoping that I can just clear coat this and kind of keep, you know, vintage
vibe of it rather than doing something like this that is, you know, completely fresh. It is very
hot today, in case you're wondering why I'm so red. We are in the 35, 36, 37 range today with
the Humidex. Not my favorite time of year. Okay, let's get to work. So there are 24 drawers in
total, and of everything that I had to do with this piece, the drawers are what ended up taking
the longest. So the first order of business obviously is taking everything out, making
sure there's nothing left. I did find a bunch of screws and washers and random bits in the
back, and this little telescopic magnetic wand is absolutely perfect for this job.
The wheels in particular were pretty bad. They were caked with probably decades and decades of
dirt and grime and grease. So why am I bothering to do a piece like this? Like I said, it's a little
bit outside of what I normally do. Actually, it's a lot outside. I don't typically work with metal.
But when I bought this, I was actually planning to keep it at the time. I can always use another
countertop with storage space, and this seems like a great addition to the shop. That's changed
a bit. I don't think I'm going to be keeping this. To be honest, I could use the money from the sale,
and my plans for how I was going to rearrange things changed a bit. So this is going to make
somebody a fantastic utility cart, or even a piece of furniture in their home. But I think
just to anthropomorphize a bit, I feel like this piece would be super happy helping somebody
organize their tools or craft supplies. I apologize for all of the cleaning footage.
Normally, I skip through that a bit when I'm working on regular furniture, but in this case,
it took so long to clean this. I think it took me two and a half or three full days
to clean all the drawers. Like I said, there's 24, and they were pretty gross.
So to preserve this original paint, I'm using Kredcutter, which is a degreaser,
and I'm using my air hose here to blow out any extra moisture that might get trapped and cause
more rust. It's important when you're working on metal, especially when you're trying to remove
some rust, you want to also help prevent it from coming back, and I'll show you how I do that as
well. The degreaser made a huge improvement to the exterior of the cabinet, which you can see here.
Super, super satisfying. There's a lot here that actually looks like rust, and it must have been
very, very surfacy, or it could have been some sort of mildew. I'm not sure, but this cleaned up
quite nicely. I was happy with that. Now, this piece is insanely heavy. It took three of us
to get this in my car initially, and this base is the heaviest piece of all. I'm kind of built like
an ox, and I'm super strong, so I managed to get it up there, but it was quite the feat,
and those two big wheels there on the end, that is where the majority of the weight is on the base.
Now, this was pretty neat. I've never seen a solid rubber tire like this. It is literally all one
piece. There's no inflation there, but if you look through here, this can hold up to 790 pounds. That's
pretty intense. Now, the wheels have so much grime and grossness caked on them that they actually
don't turn all that easily, so I need to give these a really good cleaning, and to do that,
I'm actually going to remove them completely from the base. Any bolts or nuts or bits that I took
off, I soaked in this bath of Evaporust. Now, Evaporust is a non-toxic solution, which is really
good for removing rust and grime and grease, and what's best about it is that it's reusable, which
is why the color here is so dark. It's normally kind of a golden color when it's fresh, but you
can reuse it over and over again. So, this wheel on the right has been cleaned up a bit, and the
wheel on the left is how it was originally found. You can see there is a bit of a color difference,
and it's definitely much cleaner. It's not perfect. It's going to be impossible to get
this absolutely pristine, but I'm just doing as much as I can to get any damage off while also
keeping some of the patina that makes it so cool. Once all the cleaning is done, I'm applying some
rust inhibitor. Now, this is going to stop any rust that's remaining from progressing. If you
use it with a little bit of steel wool, sometimes you can actually get some more surface rust off,
so I'm doing as much as I can to get as much of the surface rust off as I can, and then I'm
literally smearing this everywhere to create kind of a film that's going to protect this from rust
in the future. I'm also going to be adding another type of wax a little bit further on, which is also
going to further enhance. I know in the beginning I said I was going to clear coat this, but applying
a spray clear coat over original paint sometimes just doesn't turn out very well, and it can be
kind of blotchy, and it can peel and flake, and I just don't want to do this, so I'm treating this
as a car, and I'm going to be using an automotive wax to help protect it as well. Now, one thing I
didn't mention about this piece was the smell, and if you've ever walked into an old, I'm going to say
Uncle Bob's old auto shop, you know exactly the smell I'm talking about. It's like damp, rusty
metal and grease. I don't know how else to explain it, but this piece reeked of that, so the cleaning
took care of a lot of it, but I really want to make sure I tackle the rust on the inside as much
as the outside. Once that's done, I'm going to stack this back up, and I can finish up with the drawers
with that same rust inhibitor film. There were a couple of handles that were bashed in pretty good,
so I'm just using a flathead screwdriver to try to pop some of those out a bit. I don't need this
to look perfect, and then of course we have to have an inspection. So in order for this to function
as a work unit, it's going to need a top, but these clips complicate things. I don't want to remove
them. It would be very hard, first of all, and you know, somewhere down the road someone might
find another piece for this and want to add to it, so initially I thought about routing out the
underside where the clips are so that this would sit down flat, but the height is such that if I
did that, there wouldn't be very much wood left on top in those areas, and I was worried about the
structure of it. If you're having deja vu right now with the color of this piece with that birch,
it might remind you of this, and this is one of the reasons that I initially wanted to keep this,
because it would kind of match, but because I'm opting not to spray paint this a completely new
color, which may or may not be a mistake, only time will tell, I don't think I want to leave
the top natural birch, so I'm going to do some things to kind of make it seem a little bit older
than it is. Let's see if I can give it a little bit of a faux patina to kind of match the natural
patina of the cabinet. So I have to figure out how I'm going to attach this to this metal cabinet.
Now in the front, there's this little hole where I can put a screw and a washer up from underneath
and clip it in that way without having to create a new hole, but those are the only two holes on the
entire top, so like it or not, I'm going to have to drill a couple of holes. I also want to add
something along the back here to help support the top if someone were to put something heavy.
I wouldn't want it to dip down. So this big chunk of birch that I have here actually started out
as a dining room table that I picked up, I don't know if it was a yard sale or what, but I got it
really cheap and I repurposed it into a countertop for my laser cabinet. I ended up eventually getting
a second laser and I needed more space, so I needed a bigger countertop, took this one off
and replaced it with a different one on the cabinet. So now this is entering its third life.
I think what I need to do here is add some strips around the outside which will cover this gap and
help make the top look a bit beefier than it is, and it'll also allow me to create some short handles
which will help wheeling this heavy thing around. It does have two swivel wheels in addition to the
big fixed wheels, but it's a little bit hard to maneuver and I think just having a couple of
hand holds will really help. To cut the side strips I'm using the fence just to get my measurement
and then kicking it out of the way so that I can use the miter gauge to safely make this cut.
If you're new to using a table saw and you know you want to make table legs or there's lots of
different things furniture flippers can use a table saw for, it's really important that if you
need the miter gauge that you don't use the fence at the same time. You can use it to set up but
then kick it out of the way when you're ready to make your cut. Once I had the width and length of
the pieces to go around the top I'm using the planer to get the proper thickness. I don't want
tiny thin strips because I'm using these also to make the handles but they were just a little bit
big. So now it's time to glue this up and I know immediately someone's going to say you can't do
that and I'll explain. Normally let's picture this as a tabletop, like a big table. You would normally
never glue a strip like this to the end grain of a table because of wood movement. Wood doesn't move
lengthwise with the grain, it moves widthwise. So that's why when you see countertops like this
or even tabletops you'll see a lot of little thin strips glued together to make a big slab like this
rather than two or three big pieces of wood and it's because of wood movement. So the danger in
gluing this like this is that it doesn't allow the wood to move widthwise because it's glued
and sometimes that's when you see cracking. But on a piece like this, this is only 18 inches wide
and the top itself is made up of pieces that are, I think the widest strip is maybe three inches wide
but most are an inch and a half to two inches. It's going to be a lot less movement than if this
was made up of big boards. Now that said, there is the potential for this to have issues down the road
with some minor cracking. Sometimes if you do a mitered edge around the corners it allows a little
bit of room there for movement. You can also add something like a breadboard end which essentially
is just a floating spline which kind of marries the edge grain section to the trim piece that
you're putting on and it allows it to move a little bit more. When I screw this to the metal
cabinet the holes themselves are going to be bigger than the screws which is going to allow
the piece to kind of shift and move and it won't be held rigid because that is one of the biggest
issues with wood cracking when it cannot move. Now when I glue up these long sections you'll see
that I have it way longer than the top and that's because I'm going to use this for the handles. So
once this is all glued and dried and secure I'll figure out how long I want those little grips,
those little hand holds to be and I will cut the excess off. So you can see here how fresh and
new this looks. Everything's very sharp and pristine. I need to kind of mess that up. Obviously
the hand holds I want to be comfortable so I'm rather aggressively rounding the edges here and
once that's done I'm going to switch to a different type of sanding disc and I'm just going to very
lightly round up the edges on the entire piece. Had I spray painted the cabinet it would make
more sense to have a more modern looking fresh top on it but because I chose to keep the patina
I kind of need the top to match even this is coming from kind of a freshly remilled piece.
So one more thing I need to do to prepare this for attachment is to create a strip of wood that's
going to slide in those slots at the back. Remember where I said I wanted there to be something there
so that if someone put something heavy or leaned on it that it the wood wouldn't want to dip down
and this is exactly what I'm talking about here. I still have to trim it cut it to fit and I don't
want to use raw wood on this I want to seal it. So once I mark this to know where to cut I'm going
to pull it out and then I'm going to spray the entire cabinet inside out front back with this
automotive wax which has some carnauba wax. Now there's always someone that likes to chime in if I
pronounce something differently than where they live. Here in Nova Scotia at least in my family
most of us pronounce it carnauba wax but because I wasn't sure I looked it up and most people
pronounce it carnauba wax which just sounds so weird to me. How do you pronounce it? I need to know.
So this added layer of wax is just a little bit of extra protection just like on your car
with this strip of wood I'm just adding a little bit of Odie's wood butter. I'm going to let it
soak in and buff it off and then I can install it. You can see here this is exactly what I'm
talking about it's basically just going to match close enough that front bar so that the top sits
flat and won't dip if something heavy is put on it. Now birch is notoriously difficult to stain
it's always blotchy as such I usually choose to use a pre-stained conditioner when I'm using it
and what this is going to do is just kind of prepare the wood for stain it's going to help
with some of that blotchiness by soaking into the areas that the stain would want to soak into which
is what causes that abnormal blotchiness. Basically you apply it you let it sit for a certain amount
of time and then you come back in and you can just take a fine grit sandpaper and lightly sand off
anywhere the grain has raised. Once it's nice and smooth you can go ahead and stain. Now I'm
choosing to use a gel stain because that tends to do a little bit better on these blotchy pieces
but with the effect I'm going for you'll see here as I'm wiping it off I'm going to be rubbing it
off more in certain areas. The goal here and it's going to be a multi-step process is to make this
piece this top look older than it actually is and you can see around the edges there there's
kind of a light area it's because I've wiped off more than I normally would if I was going for a
more uniform finish. This is a product I love to hate not in general a fan of this but in this
specific application I find it so good at creating a warm almost patina look especially over
something that's already been stained and kind of sanded back around the edges. Now this is the
underside which was not conditioned but I'm still adding this because I want to seal this wood
entirely. Had I painted the cabinet and given it a completely new look I would probably be using
something like odies oil. I could have used shellac in this situation that would give that same sort
of old world feel as well but I don't find shellac to be one of the hardiest finishes out there and
if you're looking at this thinking that looks kind of familiar it's because I've used it before.
I've used it on this piece and also this piece both fairly modern furniture that I wanted to
look older. Now what I don't like about this stuff is how long it takes to dry. It says on the can that
you're ready to do your second coat in four hours. Never have I had that happen. It's always at least
a day to dry and despite trying everything I can't seem to get a thinner coat on. It always comes out
the same sort of thickness. So I'm doing a test fit here. I'm going to reach up underneath and poke
where I'm going to pre-drill my holes. I also have no choice but to drill a couple of holes in the
metal. There's no way around it. I initially drilled these with a fairly small bit but you can see here
I'm going to use this step bit and this is specifically for metal. This was actually given to
me, oh my gosh, a couple of years ago by a viewer who sent it from my Amazon wishlist and I'm finally
getting to use it in a video. What's great about these is you can actually feel it when you drop
to the next level so it's really easy to control how deep you go. I initially stopped there and
decided to go another level or two deeper just to make sure that hole was big enough that the
screw would have room to move with the wood. Because metal doesn't move if you have just small
holes and the screw can't move within that hole this top would for sure crack over time. So this
top coat finally dried enough that I could add a second coat and I will let that dry up overnight
and by the next morning I should be good. Now in the meantime as I'm sitting here looking at this
there's so much brown on the top and then the bottom is very plain so I have these scraps of
walnut veneer and somehow got the idea to cut little strips to fit inside the openings in the
handles. Now normally you would put a label in there and someone could totally still put a white
label in there but I just thought this would be kind of a fun pop of color and help kind of bring
that brown down. Veneer this thin can be pretty fragile so I decided I was going to add a piece
of painter's tape to the back just to kind of help keep it together you know if someone's trying
to take it out and put it back in it'll keep it together and keep it from essentially falling
apart in somebody's hands. I added just a little bit of Odie's oil to kind of deepen the color and
protect these a bit. It should also help make them feel a little bit less brittle and made sure to
make two slightly larger for those two drawers that don't entirely match the rest they have
slightly larger handles and are a slightly different color. Now I don't know if this was a good idea or
initially I liked it and the more I looked at it all I could think of was 70s but at any rate
they're easy to pull out if the new owner doesn't care for it. To finish things off I'm adding a
layer of paste wax to the top applying it with just a little non-woven pad but when I go to
remove it I'm actually going to use a little bit of steel wool and then a nice soft cotton cloth
and that's just going to bring the sheen down slightly. Now looking back at what I started with
I wasn't even going to do a video for this this is just a project that I had to do anyway and it's
just kind of unique so I thought I would share it with you guys even though it's not typically what
I do. Now I still don't know if I should have done my original idea in completely repainting this but
there was something about the original color and little bits of patina that I just thought
was kind of cool so I opted to leave it. What would you have done if you were in my position
and were redoing this to sell? Would you have tried to keep some of the original patina
kind of really lean into that vintage vibe or would you have given it a completely fresh more
modern look? Let me know in the comments below and enjoy the reveal coming up for what it is.
I'll be back soon with more typical videos. Thank you so much for watching and I'll see you next time.