Refinishing a Smelly Mid-Century Dresser: The Most Extreme Restoration Yet!

Trash To Treasure
3 followers
YOU WON'T BELIEVE THIS FLIP! This FREE curb side dresser smelled like cigarette smoke and was covered in several layers of chipping paint. I had NO idea what was under the paint and full odour removal is never guaranteed. But I'm glad I took a chance on it, and it was so fun refinishing this!
#furnitureflip #refinishing #furniturerestoration #mcmfurniture #vintagefurniture #transcendfurnituregallery #mcm #restoration #diyhome #restoringfurniture #relaxingrestorationvideo #relaxingvideo
AI Generated·May contain errors
Welcome everybody to another video. If you saw my last video, you saw me turn this sad state
of affairs into this beautiful dresser. This was a ton of work. There were so many issues with the
finish and there was a horrible cigarette smell I had to deal with. If you follow my Instagram,
you know that I actually got two dressers that day. In this video, we're going to be working
on the second dresser, which is this mid-century piece you see here. I'm going to be stripping
this paint off and dealing with the cigarette smell. Wish me luck. I am going to need it.
My name is Angie and I'm the one behind Transcend Furniture Gallery, a business created from the
love of vintage furniture and the desire to take broken, dated, and unloved things and turn them
into modern treasures. Sometimes I paint and sometimes I don't, but I always do what I can
to save old pieces from the trash. Welcome to my workroom. First things first, let's take this
piece outside. Yes, I can lift this. I am not a small human. This part was actually filmed the
same day that I worked on the other piece, so you'll see the drawers from the other piece as
well mixed in. I decided to clean them both at the same time as it was a super beautiful sunny day
and would allow these pieces to dry after cleaning. First thing I have to do is try to scrub off as
much of the nicotine and cigarette yuckiness as I can. Both of these pieces just reeked of
cigarette smoke, but even just doing the cleaning made a huge difference, but you'll see I'm going to
do other things to tackle the smell as well. After a good cleaning with a bleach cleaner, I'm just
letting these dry out in the sun. Okay, YouTube time warp now. It is now a week later and this piece
has been sitting over here while I worked on the other piece and a few other pieces in between.
Now it's time to get to this piece. I'm using my favorite circa 1850 stripper here. It worked so
well on this thick paint. There's actually multiple layers of paint just like the other
piece and this stripper. It is strong. You can see that I have my garage door open right over there.
I'm literally six feet away from it, so it's well ventilated, which is very important when
working with this stripper. I'm stripping this middle bar here. It actually fits on the front
of the dresser in between the legs. I don't know if I want to keep it yet, but I'm gonna have it
ready just in case. This is interesting because as I'm putting the stripper on the doors,
immediately you can see the discoloration from the years and years of smoke build up on this
poor dresser. You can see here on this piece just how gross that actually is. I'm so happy
to be stripping this off. This white latex paint is so sticky and gross. If you guys could see my
face right now as I'm stripping this off, you would see the biggest smile ever. I knew it was
going to be walnut. I've done enough of these dressers to know what type of wood is typically
used here, but I didn't expect to find it in such good condition. It was just drawer after drawer
of beautiful walnut veneer. Now, I'm generally not one to judge someone for how they want to
treat or refinish their own furniture. That's totally fine, but I don't know what happened to
this poor dresser to deserve this. But I'm gonna do what I can to make it right. I still have no
idea what condition the top is in. I'm a little bit scared, but we'll see in a few minutes. In the
meantime, I am going to strip all this off. I've pretty much already decided that it's going to be
at least partial paint, and the main reason for that is these areas here, the braces and the trim
in the front, it is solid wood, but there's no walnut veneer on the front of it. So even if I
stained it, it would be a slightly different color than the rest of the walnut. And while some people
don't mind the two-tone look, including myself, it's not really what I want for this piece.
Manufacturers who make these pieces initially, they use what's called a toner, and basically it
turns all of the wood the same color. So even though you've got walnut veneer in some parts,
and a completely different type of wood in other parts, when they use this toner, it makes it all
the same color. What I really like about this stripper, this particular version, is that it's
a gel version, so it tends to cling to vertical surfaces a lot better than the super runny stuff.
I also find it doesn't dry out quite as quickly as the super runny stuff, so even though it's a
few more bucks, I usually try to get this kind when I can. So far so good with this top. I haven't
seen any craziness yet. I'm very hopeful here that I'm going to be able to use this top. Okay, so now
that the body is all stripped off, I'm going to be tackling these legs. They're a little bit loose
from the main part here, so I'm going to undo the screw. I'm pretty sure I'm going to find a dowel
here that just needs a little bit of TLC, or should I say TFG? See what I did there?
I'm a weirdo, don't mind me. Okay, there's my dowel. I'm going to pull the other one off here
and then clean up the joints. I want to make sure there's no old dried up glue there, because the
new glue is not going to stick to it. And another good thing about taking this apart is it's going
give me easy access to completely sand off these legs. You can see Mr. Dewalt is very happy to be
helping me out today. I love his little smiley face. It's my absolute favorite. One thing I like
to do when I'm sanding off legs is do just a little bit here on the edge. It keeps them from
chipping over the years and just gives it a nice finished look. So I've already sanded down this
joint here. I'm just adding a small bit of glue. I don't want to completely overload the joint. I
just want enough to make sure this is going to stay nice and tight. Yeah, still be able to be
taken apart if need be down the road. So these wood handles basically sit on top of the drawer
face. Someone here has attempted a repair in the past. Not a very good one. They used, it looks like
silicone actually, instead of wood glue to try to put this on. And they didn't pull the staple out
or even attempt to put it back in the same hole. So the fact that the staple was folded over like
that meant that the handle didn't sit flush against the drawer face. So I'm scraping off all the old
silicone. I've pried out a staple and they should now fit in the original holes. Once I'm sure that
everything's going to line up well, I'm going to add some glue, just a small bit. And I'm going to
skip over the holes because I want to be able to have a good view of them when I'm putting this
back together. And I'm also going to add just a tiny bit on here as well just so that I'm sure that
it's going to adhere well. And I'm just carefully lining them up here, making sure that the staples
are going to fit in the original holes. So far so good. And a little love tap with the tack hammer
here. And that should do it. I'm going to clamp this in a few spots just to make sure that it
stays tight while the glue dries. But this handle is now good to go.
Finally getting into the fun stuff. I really love sanding. There's always so much prep work with
these pieces, especially if you're dealing with issues and doing repairs. Sometimes it feels like
it's, well, it literally is hours and hours, sometimes days before you get to the fun stuff.
Speaking of fun stuff, thank you again to these awesome folks who bought me more tees.
This is the best thing ever. It's a great way to help support the channel,
and I really appreciate it. And it's fun. It's really fun getting to know some of you guys.
If you're wondering what all this tea nonsense is, you can take a peek in the description box.
I put a link down below there for you. Okay, back to work. This is actually a 150 grit sandpad.
I could use something a little bit coarser, but because these drawer fronts are veneer,
I don't want to risk sanding through. The handles are solid wood, but I'm just using
the 150 all around. It's cutting through just fine. There's no need to really go any coarser.
Not in a rush. It's veneer repair, and refinishing is not something you ever want to try to rush
through. The reason for that is not just your own result, because, I mean, that's important as well,
but I feel like we kind of have a responsibility to help this piece survive for years and years
to come, and with veneer, you usually only get one or two cracks at refinishing it, so if you're
blasting through a finish because you're in a rush or don't feel like taking your time,
you may end up with a great result, but what it's going to do is inhibit someone from refinishing
it down the road, and to me, that's not okay. I usually try to avoid that wherever possible. I
want to make sure that if someone decides they want to do something to this dresser in another
40 years, that they're still able to do it, so that's just my two cents. Yeah, so the reason it
seems like I'm taking forever to sand this one drawer is because I'm sanding all of the surfaces.
When you're dealing with any kind of odor, whether it's musty smell or cigarette smell, one of the
best ways after cleaning to get rid of the odor is to remove a layer and then reseal the piece.
This drawer's dovetails were coming a little bit loose, so I'm just adding a tiny tiny bit of glue
in each little section here, and I'm going to clamp it back down. You don't want to completely
saturate the joint with wood glue because there may come a point where this needs to be taken
apart, and if it's completely loaded up with glue, there's a higher likelihood that it's going to
break if you try to separate it. It's just kind of another example of taking care in what you're
doing and ensuring that this piece will be usable down the road. I can't reach this with the orbital,
so I'm doing a little bit of hand sanding just to remove that last bit of paint from the handle
there. And these are my drawers now. They're all completely sanded. Everything's ready to be
stained, sealed. Super happy with how this is coming. I know this is a bit of a longer video.
Thanks to everyone for watching and sticking with me so far. I find editing these hard sometimes
because you want to try to cut out as much of the fluff as possible so that people don't lose
interest. But at the same time, these are all very important steps. Struggle is real, people.
These two sections here, they were holes in the veneer, and when they painted it, the paint
settled into these holes. So the only way I can fix these is to kind of gouge out the remaining
bits of paint, and then I'm going to use some walnut wood filler in these holes in the hopes
that I can disguise them enough. This is LaPage walnut wood filler. It's one of my favorites. It
usually stains up pretty well. There's also a little bead of paint along the back edge here,
so I'm just using a blade to scrape that off. Now I'm picturing this piece in a darker green.
This is pressed fern. It is a really nice green, but I want something a little bit darker, so I'm
actually mixing coal black into it. It's not a precise recipe. I've never mixed these two colors
together before, but I'm gonna see how it goes here. These lids are notorious for sticking.
That little silicone round circle thing that I had, those are great for helping to get the
lids off without killing your hand. If you're interested in that, I'll pop a link down in the
description below, as well as some of the other products that I'm using. Just giving this a stir.
It's looking kind of like what I was picturing, but the paint is always a little bit lighter when
it's wet, so I'm gonna have to apply a first coat and just see how this dries up. It might
still be a bit light, but we're gonna give it a try. I want a dark green, but I don't want like
80s and 90s hunter green, if that makes sense. So I can pretty much already tell as I'm doing this
that even though it's gonna dry a little bit darker, it's still not quite as dark as I want.
So once I get this first coat on, I'm gonna mix up a little more black into the green that I just
mixed, and we should have it pretty much perfect for the second coat. This is General Finishes
gel stain in the color candlelight. I was hoping to use nutmeg, which is just a slightly different
tone, but I didn't have enough. I wouldn't have had enough to do all of the drawers and the top,
so I went with candlelight. It's kind of the next best thing. It's a little bit redder than nutmeg,
but I think it's still going to look great, especially when I get that green just a bit
darker. I am so excited for how this is coming along, you guys. I applied the gel stain first
to the handles, which are solid wood and a little bit lighter than the walnut veneer on the front,
just so it would have a little bit more time to soak in. They are going to be slightly different
tones anyway, but I was just trying to minimize that a little bit. I'm doing my second sanding
here on the top. This is now a 220 grit. This is the last grit that I'm going to be using before
staining, and I forgot to mention I did the same thing on the drawers. And also just sanding
through my little patch job there, just making sure it's nice and smooth. And now I can take a
good look here. So there's a few little areas of damage. I don't think anything is overly serious.
The stain should pretty much cover most of these issues. This is an oil-based stain. I really love
the gel stains. They just kind of sit on the surface. They don't soak in as much, and I don't
know, I just find them really easy to work with. Just wiping off the excess stain now. You can see
here now that the color is dry, and it is definitely a little bit lighter than I want. So
here I'm going to add a little bit more coal black, give it a stir, shake it up, and we're
going to try again. This is a great view showing how light the color is when it's wet, but this is
going to dry a lot darker, and I'm really happy with this color now. We're closing in on being
done. I'm going to put these legs back on. They're super easy to put on. I don't know, I think I'm
going to leave this piece off. I just, it doesn't serve a purpose structurally, and I just, I think
it's going to look cleaner and neater without it. The stain has now had plenty of time to dry. I am
applying a water-based finish over top of an oil-based finish, so you just, you can do it, you
just need to make sure that your base layer is completely dry. You want to get in and get out
with this polycrylic. You don't want to overwork it, so I'm just putting it on, wiping it off, and
moving on. If you miss a spot, just wait and get it on the next coat. This is the same clear
odor-killing primer that I used on the other piece. It paints on white. You can either roll
it or paint it on with a brush, but it dries completely clear, and it just helps seal the wood
and seal in any residual odors. There's actually not much left. I'm quite surprised after cleaning
and sanding this piece. There's very few traces of the smell left, but I decided to prime it anyway,
just in case. This top is looking absolutely beautiful. This is my first coat of polycrylic.
I'm actually going to do three coats on this. I had to purchase a new back for this, so I just
went to the hardware store and picked up a big sheet of, some people call it hardboard, it is
technically called masonite, but I had them rip it down to the size, just popping out the rest of
these staples in preparation. Wow, okay, it's almost reveal time. I'm just adding the backer board here,
and let's have a look at what this piece looks like now.
