Ox Bow. It WORKS! - First Test

LEARN ARCHERY
7 followers
Jun 19, 2026
AI Generated·May contain errors
Video Summary
AI GeneratedTodd Cutler reconstructs and tests a complex triple-bowed Chinese siege weapon from approximately a thousand years ago. By utilizing a unique pulley system and three separate bows, he achieves a massive draw length and significant power, ultimately validating the weapon's destructive potential through a high-velocity test shot.
It is a fiendishly complicated triple bowed piece of Chinese siege artillery from around
about a thousand years ago. The draw length is a whopping 132 centimetres 54 inches. The power
is 110 kilos so now what I have to do is actually shoot it. We all ready for it?
Hi it's Todd from Todd's Workshop and Todd Cutler here and I am back with the Chinese
Oxbow and it's this. It is a fiendishly complicated triple bowed piece of Chinese
siege artillery from around about a thousand years ago and the thing is I didn't make it up.
It really existed. When I first came across this picture I studied it and I thought
oh that is genius and I understood it. I understood exactly what they're trying to
achieve and I got so excited about it I made a video and then I started to have some doubts
so I came back for a second film and at that point I thought okay well maybe I'm not so sure
anymore so my doubts crept in. Came back again made some models basically began to understand
it then I got to the point where I was certain that I understood it and now I get to this film
here the fifth one in the series and I'm certain that I don't understand it but don't worry because
despite that I have made a seriously powerful piece of siege artillery. It is just fantastic
and it has delivered everything that I could ever have wanted from it but if this thing does
interest you then go and check out the earlier films because it goes through all of my thinking
about how I've managed to get to this stage but right now I'm going to talk you through the bows
because that's the real driving engine of this machine. So the first thing that is absolutely
unmissable about this is these two bows at the front the bolt shoots that way so you've got
these two bows which are paired up just tied together here got a pulley on the end of each
bow coming down to this one which is facing the other way so you shoot the bolts that way
from the back of the bow here and that's actually pointing towards you really weird setup for well
western european eyes but the thing is we have this picture here and it shows something going
on here but it's a bit difficult to tell the detail this is my interpretation of what is going
on now your interpretation may well be different but bear with me because I promise you this is a
so when I shoot it pop up in the comments and we'll have a discussion about what we all think
about the layout so the core of the idea is actually very simple that you have a bow string
a long bow string that goes around tied off here goes around a pulley there a pulley at the other
end and back to that bow but these two front bows are tied together here so what that means is is
that one flexes this one has to follow so if I pull the string you'll see how the bows start to
move and so this setup does two principal things it allows you to generate your thrust on the arrow
from three bows not just one the bows are simpler to make because they're not so powerful so making
really powerful bows is always harder so that is also just an added bonus but the other thing is
every archer knows if you can increase the draw length on your bow you get a lot of extra power
and the draw length now has gone from about here if it were a single bow to about here
pretty much doubled so as I said the core of this idea is very simple and I think that we can all
see what's going on here with the string and the pulleys but there's something clever going on as
well and unexpected and that is that this bow here is being operated like a regular bow you've got
the string at the limb tips that's coming in at an angle as if it's being drawn by your fingers
but these two outer bows are not behaving like that that means that they behave in a slightly
different way and a much more powerful way when you put that that energy into the system but you
need to go and look at particularly films three and four to work out what's going on with that
the difference between the straight draw and the vector draw but go check that out but the short
version of the crazy things going on here is that that bow is 100 pounds that bow is 100 pounds and
that bow is 80 pounds and yet and yet when you take this to the full draw which is back to here
all the bows deflect the same it seems really odd to me it it seems crazy but the thing is
it's true and that means that all of the bows all of them are working at their maximum efficiency
because they're all working at their maximum drawing but using bows of this power gives us
our first problem which is quite simply that I cannot brace them so I've had to modify a modern
winch and that allows me to get these front bows back and gets the string onto the back bow here
on the end of the bow arms here we've got pulleys just like this one and they're weighing in about
90 grams now 90 grams is obviously not a weight you want to put onto the end of a bow limb if you
could help it but there has to be some way low friction way of getting these strings to skid
through now there is nothing better for doing that than a pulley and the Chinese advanced
engineering nation at the time absolutely knew about pulleys used them and I'd be stunned if
they didn't put them on the ends of these arms but the real problem with this drawing here
is it shows you nothing about what's going on on these limb tips with the strings and we know there
had to be some low friction system here in place and somebody sent me a translation of a document
to do with one of these and it mentions wheels and bows in the same sentence so for me as far
as I'm concerned there has to be no doubt that there were pulleys on the end of these bows
so we already had the stock here with the positions for the bows made but this is a temporary stock
I'm going to replace that once I've got everything working properly which it is now and I'm going to
replace it with an oak one but the pulleys also have helped massively because what that means now
is with everything set out correctly the orientation correct and a winch I can start to draw
things back I can start to see how they all relate to each other and the flex we get on the bows
fortunately Alibo sent me a range of boats so I've got the 100 and another 100 at the front
I knew I wanted that but I was a bit uncertain what I wanted at the back we've settled on an 80
but we could have gone up or down from there so thank you Alibo. Hi I've just interrupted today's
film for a Todd Cutler related interesting fact so we have got ourselves a twisted rondel here
typically English with organic spacers between metal discs later adopted on the continent but
we love them in England anyway this and lots of other similar items available on toddcutler.com
but now back to the film the draw length is a whopping 132 centimeters 54 inches the power
is 110 kilos 110 kilos 246 pounds so now what I have to do is actually shoot it now we have got
our original crossbow trigger that I made for this thing well I didn't make it for this thing I made
it for someone else but I'm using it for this but it is also completely untested so we're going to
have to set this up now and just make sure that this operates at the kind of poundages that we
need to hold back because I haven't done that either and then we can shoot our bow now I'm
hoping that my bench stays attached to the wall so obviously as we all know a steel cable or rope
under tension if it snaps it can spring now this thing is obviously going to be under tension I'm
going to release it there so I've just put a safety tether to uh if it does happen stop Tormash getting
one of those in the face right what load have we got up there Tormash 29 okay we're going to rip
the bench off the wall one two six okay so we've exceeded that oh this makes me a bit nervous
right what happens results so our trigger takes 126 kilos wasn't difficult to release now it's
time to fit it to the bow it's times like this where you're actually working the timber you
realize how rubbish this stuff is so I'm going to put some strengthening plates on the side
carving in the arrow groove the last thing to do was to make a bolt but luckily I have some of
these left over from previous film and they're medieval throwing darts and they're weighing in
at 212 grams so that is a nice gentle load for something like this on a first shot might go
lighter in the future don't know so what is next well there are no more excuses it's time to shoot
we all ready for it
that was just unbelievable that's 18 mil ash that's the end of it just snapped off
whoa so that's the rest of it and that was 50.9 meters per second so okay gun terms that's not a
lot bow turns for old world technology that's a lot so what can I say that was absolutely epic
so 343 joules 253 foot pounds that was just fantastic and enough power to break the end
off my bolt there just reviewed the footage and big news the momentum of that arrow is comparable
to a 44 magnum bullet so not the energy but the momentum and the momentum is so often tied in
with penetration and that is just massive news and it just shows the potential of this weapon
so we got our one shot off and that was yesterday before rain stopped play but this is going to come
back now for loads more stuff so I'm going to take a pause I'm going to make a proper stock
for this thing medic make it out of oak and then we're going to go and shoot all sorts of things
so I know the manuscripts at the time they talked about incendiary arrows obviously I'm going to do
that but there's this fascinating one that I need to know about called a cup arrow or a storm of
crows I think they called it and it's some sort of a sabot type head on the end of the shaft
with loads of smaller darts in it that even they admitted was fantastically inaccurate but probably
very good against infantry I don't know let's find out throw your ideas in the ring let me know what
you want to see but the other of course is this is heavy at 212 grams so we're going to try some
lighter shots as well see if we can increase the speed hopefully without breaking any bows
but anyway if you have enjoyed this go and check out our other channel Todd Cutler and of course
our website toddsworkshop.com where you will find all manner of historical medieval goodies weapons
stuff you will be interested in and there's some of my previous props that I've used in
YouTube films there for sale there one day this will be but not yet anyway I'll see you again
and I hope you enjoyed it
