This Thing Needs Help! - Antique Pathe Freres Model 50 Phonograph - Motor Repair

Amateur Repair Time
257 followers
649 Video Views·Jun 7, 2026
Check out our Patreon page, for all of our channels. Contains outakes, concise arcade repair tips, bloopers, repair FAILS, Audio youtube wouldn't allow us to upload, and much more!
https://patreon.com/JoesClassicVideoGames
------------------------------------------------------------------------------------
AI Generated·May contain errors
Ladies and gentlemen, welcome back to Amateur Repair Time. I am going to work on this Victrola
today and we'll see what we can get it to do. I picked this up probably a year ago at an auction
and I have another one exactly like it. I didn't realize that I had the exact same model. I've
got another one that's a lighter color and I kind of like the lighter color a little better.
This one has a little bit of damage to the front grill
and we're going to have to try to make it look a little better but I think I want to sell it.
I've just got too much stuff so I'm trying to fix some stuff and sell it which is kind of my
original intent for doing this channel was I wanted to fix things and then sell them. So what
I've been trying to do is fix everything in this room and then once I get everything fixed
start bringing in maybe like I fix this and then sell something in the background and then
bring something else in and fix it and then put it in the background and sell something in the
background. So for instance like these this clock here we fixed a long time ago.
So once I get all the clocks working the next clock I bring in maybe I'll sell that one and
then put the one I fixed back there. So that was kind of my plan. So I've been working through
that a little bit but I've got too much stuff so this I think is going to go. So let's see what
kind of shape she's in. This I thought that this grill came out like they do on the uprights. This
is a Meteor phonograph there it's not a Victrola and the on most of them that little guard comes
right out. I figured this did but it doesn't. I guess on these countertop models it's like
permanently attached. I didn't know that. Let's see what kind of shape we're looking at.
Oh it's not a Victrola. It's a Path which means I might not have the exact same model or maybe I do.
I don't know. Path. I thought that theirs played sideways. I guess not. Boy it's got good amplification.
I can hear it now.
Oh my darling sunshine. It's gonna be something like that.
Interesting. What is going on here? Has that been replaced? Why is there a gap there?
Doesn't seem right does it? Hmm. That's our speed adjustment and here's our brake.
This goes on the side of the can. That really needs some that would be better with some
some leather. What is that? I've never seen this type. It's so dark you probably can't see it.
What am I looking at? Okay so it says Path. Path Freres Phonograph Company. New York, New York, USA.
Pathophone model 50. Okay this is what always gets me. Look how, look at the finish inside.
How beautiful it is and then look at the outside. How faded and worn it is. If we could get that
to look like that it would really be something wouldn't it? So that's mahogany. It's like this
beautiful red and then this is all. So if we just put lacquer on it will it reactivate it and make
it look like that? I'll research that and see if I can just you know rub lacquer on it and get
back to that look. That would be the way to go. Alright so model 50. Let me move this out of the
way and then let's uh there's our belt. Let me see if I can get this lifted up so we can see
what's going on inside of it. This is the thing I was trying to figure out what in the world that
is. It almost looks like a roach egg or something. Disgusting. Yep I think that's what it is because
look there's another one back there and I was touching it with my hand. Oh that's fun.
Uh there's a little tag back there. I gotta see what that is. You've seen me work on pinball
machines. I don't really mind getting crap all over my hands. Without a Sweetheart Evelyn Knight
and dancing with the dolly Evelyn Knight. We'll be checking that out soon. Okay so here is the path
gearbox motor. Yeah okay. Well I guess it does move around. It slid so that it can kind of
lift up. Here's our speed control. Yes I'm probably going to need some leather to fix the brake and
maybe the speed control too. Okay um let's do some research on this. All right so I haven't found
a ton of information about it. I did find a Victrola collector uh the gentleman on YouTube.
He's got one here and his the motor board looks completely different. Ours doesn't completely
fit the hole so it very well may be that ours was replaced um pulled off of something else.
He mentioned that on his it has a Brunswick motor.
So the original one has been replaced. He's also pronouncing it pathway instead of path.
Um the I found some other people talking about it and said that uh it's hard to find a pathway
that has the original motor in it. So apparently maybe there were there were problems with that
and they've been modified. You know there's also the issue where these were the ones that played
vertically cut records too. So some of the reproducers can be turned sideways but it looks
like on his model and on my model they've got the same reproducer and it doesn't turn. So it just
plays traditional what I would call traditional 78s that are laterally cut. So you know we just
got to run with what we brought. I'm not going to try to find the original motor board or anything.
We're just going to fix it up the best we can the way that it is and get it to play. So
um I did find some parts online of the pathway motor setup and it looks like ours actually is
one. So I don't know if they just swapped a board off of another model or what. I can't find any
model that where the board looks like ours. The main difference with ours is the brake is over here
and the speed adjustment is here and it's just I don't see any other ones that have that same look.
It could be they took it off of Victrola or something but again it looks like the motor's
right. So I don't know like whatever it is what it is we're just going to fix it up and get it to
sound as good as we can and get it to look as good. Okay folks so the gentleman's on
YouTube he was saying that his has a Brunswick motor in it.
The little bit of information I saw this looks like the correct motor but it says made in USA
which is an issue because the Pathé is a French a Canadian French company. However this isn't
a Pathé. If you looked it said Pathé Fréry my French is lacking. Okay Pathé Fréry I believe
is how that's pronounced which was the American version. So this was made in New York I think.
So we're going to take it apart maybe we can figure it out. The main problem I see with it
right now is this. This is the speed adjustment and they have a screw a nail in there that they
have bent. Look at this crap. So when I turn it and see how they've got it bent. So it's moving
the adjustment just slightly because it's bent. That's hilarious. So the way that works is
whenever this thing starts moving the centrifugal force pushes these weights out and it pulls this
thing down and that piece down there is the is like a little there's a little piece of leather
in there and it pushes up against that this and slows it down. So they've got it like that right
now but whenever this is spinning this is going to go down and touch it. So the speed is actually
controlled by how heavy that's pushing against that basically. How far does it let that go out?
So that's what we're working with. All right so we need to clean this up. I think I'm gonna go
ahead and take most of it apart or some of it apart and then we're gonna clean all this junk
off of it. I'm gonna oil it and then re-grease the parts inside the motor box there. I'm not
gonna completely disassemble the motor box because that's a big job and it's a mess.
If you do completely disassemble it I mean it works perfect. I think it's probably
gonna work all right already. The problems that you have if you don't do that is that the time
might not be as long. It might not run as long as it should and sometimes you'll hear a clunk
after it gets to a certain spot. The spring inside will be stuck together with the old grease
and it'll clunky pop part and you'll hear it go clunk while it's running. So it's not
perfect but it's just part of the way these things are designed. It's part of having one.
It's going to do little things like that. Let me see if I can disassemble any of it so that we can
clean it up. Okay so I got the platter off. That took some doing. It was pretty stuck so I
want to pry on it or hit on it. So I got a new little cheater that I've been using. So what I
did was I heated up the shaft in the middle with the torch a little bit. Just a little bit and
there's the shaft. It didn't damage it. I just heated it up a little bit you know hoping to
to get the grease to flow a little bit again and after doing that it was able to pop right off. So
that was good. So I got it off which means I can now completely remove the motor from the motor
board. All right so I was talking about how it didn't look like the the other gentlemen's but
his is the Canadian version and mine is the American version. Look at the wood here and how
it has this bevel on it and then look at the wood here and how it has this bevel on it. If you saw
his it was just one big piece but this one's different pieces. There's four different or five
different pieces and this board has that bevel on it. So I don't know I don't know why there's a hole
but um I mean it seems to me like it's designed like it. There's a bevel on the back so it hasn't
been cut and uh see the screw holes so it goes with kind of a looks like it lines up with a
little bit of a crack in the front and a bigger one in the back. I don't know it lines up about
like that whenever the screws are in it and you can see the dirt from the wheel. So I don't know
why there's a crack um but to me that looks original. I mean I don't think anybody's replaced
that because it's just it's too well done. Tell me what you think down below but again it's the
American-made version of the Pathé. His is the Canadian version. His also you could remove the
grill and on this one you can't. So we'll look into that a little closer here in a little bit
but uh I don't know. All right so maybe if we can get inside the motor we might be able to
see a logo on something. Okay so I'm looking around on eBay and I find this. This is a Pathé
There's my French again. Motor and board. So think about ours. It has the of course the
sound hole back here and then it had that little cup with the roach egg in it that I was touching.
Right this is the same lever that my speed control has but if you look there they have removed the
speed thing so I can't get a good look at that. If you see this little plate right here
with the two screws that goes over one of the pivots that is on mine as well. Mine is set up
a little differently but some of the hallmarks look the same. The barrel is the same or very
similar. The weights are the same. So that must be the original motor board and I don't know why
there's a space but and then this too the giveaway is that on ours it says made in the USA.
Why would they put made in the USA on it if it was like a Victor one or whatever. They put made
in the USA on it because it was a Canadian company so they were differentiating the ones that were
made in the United States so that they didn't have to pay tariffs and stuff on it. I think
and this is probably a later one. It's telling you that there's a patent and it's saying the
motor of quality. Well if they were doing that on the motors they would have done it on this one
too so the one I've got is probably an earlier one before they were doing that. I wish it had the
setup where it would show me how the speed control looked underneath but what can you do.
That's the this is the same on the Governor. It's a different setup though. I mean the frame
of it's different and everything so it's it could be that they were just using
off-the-shelf parts from Brunswick or somebody. You know building out a whole factory to make
to make steel parts or whatever it's made out of in the United States. Wouldn't it be easier to
just work a deal with Brunswick to buy their motors. So the guy online that had one on YouTube
the gentleman on YouTube his he says has a Brunswick motor in it and he's very knowledgeable
so he can probably just tell by looking at it. I can't tell by looking at it because I'm not
that familiar with them. I've worked on a few of them but I don't have them memorized or anything
but someone who really knew their stuff might be able to just look at that motor and say oh that's
a Brunswick oh that's a Columbia or something. Okay I've been googling and googling and googling
and I found this. One of the big differences on this one and some of the other ones is the
speed control is on the right and if you look at that board on ours the speed there's a hole
all the way through it for the speed control and so that's definitely where it originally was
and then the brake is external to the disc. A lot of them it's inside the disc
and if you look on the back there's one little pot that the needle rests in and then
most importantly see the little ribs on the wood look at the back there's a freaking crack they
designed it that way I don't know why but look at that it doesn't fill up the whole way so apparently
that's all original with the exception of I think the speed setup on mine is obviously it's been
tampered with it's not right and see how this one's round and the one that I've got is not
it's like a fan shaped and the two screws on this one don't line up with the uh they don't
go this way so they're like kind of at an angle so they're pointing towards like one o'clock
or 1 30 something like that so that's the same type of brake that's external and then this
I need to probably take that off and just see what's going on
see this little screw hole here this is confusing to me so this obviously we're missing the parts
underneath it look how it's slow on the left and fast on the right most of them are backwards
most of them are slow over here and fast on the left um and I was thinking maybe that was an
another screw hole but it's not I found another path a with another with a hole right there it
must have I don't know why they would do that but there's an extra hole maybe it was so they
could mount a different setup and then it they just didn't I don't know weird so if I could
find one of these I could probably take this thing apart and you know use my dial after I clean it up
and replace this piece I mean I'm sure that comes out of there somehow they didn't make it all in
one piece it must come apart um so I'm looking online trying to find that but yeah see that
little screw hole there so look how it's like a triangle but the one's off a little bit so that
this is a different one so look how the knob is knurled and then look how the that screw I think
is in that screw hole we were just looking at that screw over there isn't part of it that's part of
holding the board down that's you know there's three of them that hold the board in uh so the
screw is up at the top I think they put the wrong one on mine yeah if you look close look you can
see where it was round this is the wrong one I wonder what the happened there slow is on the left
fast is on the right this is a little strange too this look how it doesn't line up like it's
it hangs over the front of it but I think that's correct because that's the one that was on uh
the one we're that we're looking at so it raises up and it's on the outside of the
disc not the inside of the disc um unless I think that's correct yeah this is this is the wrong one
that would explain why the bottom of it's missing it's not it wasn't on there so that is way up
there is that another screw hole there I don't know that is so weird look you can see so this is
the one I just took off but look you can see where it was a smaller one
I don't think that's a screw hole okay so the mystery continues there is a picture of a rooster
right in the middle of it surely to god that'll tell us what this is also
see it there's a rooster walking on it they had a freaking rooster on the record so I don't know
you could you can see where there was a round one on there so they must have took the original one
off and then put one by the same company but slightly different back on there that's the only
thing I can figure so I guess we're just going to leave it on there and I'll try to figure out
how to make it work or something the um there's a little pin in there that's whenever you turn it
it's supposed to make it move I don't know we'll figure something out but apparently that's I guess
that's the original one I don't know because it's got a rooster on it and that makes complete sense
because it's apparently on the one you see right there you saw it so here's the frame of it this
goes on the bottom of the mech the mech board there is a little washer I think that one is
just stuck on there with grease let's see nope that one's designed in there is a washer a ring
there that goes here you can see how filthy you get messing with these um to get them properly
cleaned up and then get the new grease on it here's the motor it has a c-clip here that would
allow you to slide the two motor halves apart um here is the like the winding stem now look at the
wear on this see that groove I don't think that's supposed to be there like look there
where's different I think that just happened from a lack of grease yeah it's much lighter right
there here I'll show you if I can okay see that and watch when we turn it look at the bottom and
look at the top look at that now I know some of you machinists are just chomping at the bit to fix
that the way you could do it you could clean it up and then you weld back in there yeah I guess
you have to be careful not to do it where it would warp it but you weld material back in there and
then you grind it back down flat but I don't have the ability to do that um that went through here
through that spring and then through there so that wear I believe let's see here the wear would
have been right there so that wear is happening on this front piece it's all you know which is
to be honest that's probably why they've got the spring there it's probably just a really nice
design I think most of these were done in 1917 by Pathé that I was finding information on so maybe
1917 so um by then the things have been out a little bit of time and so they probably knew that
would wear or something um and you know the crank goes on the other end of it so you're out here
cranking it so the whole time you're up down up down up you're so you are doing this the whole
time whether you want to or not maybe it's just a little bit and you can't tell but you're going
grind grind grind grind grind pry pry pry grind grind grind so you can see where that would
happen that's the first point of fulcrum you know anywhere you could just basically that is
the million times that the thing has been wound has created that wear with that said I don't think
it really would hurt anything I think it just makes the crank a little loose but that spring
was holding it pretty good so I think that spring probably is to compensate for that
um and you can see that some of the grease it's heavy grease and it's just thick as freaking
crap so I'm gonna clean all that off and then the uh whenever you go to put it back in you're
supposed to use like um moly grease like the grease that they use to pack bearings and stuff
in cars so I've got some of that but let me clean all of this stuff up and then we'll work on the
okay so it's cleaning up pretty good I'm just using oil to clean it oil actually cleans really
well I wonder if it says that on the thing this is a motor oil this may not be heavy enough for
this though I'm gonna have to research that a little bit um it may not say it on here but
oil is a great cleaner you can clean all kinds of crap back in the day people used to wash their
hair with oil that's how people I guess shampoo kind of is oil isn't it soap is oil um so
if you just pour oil on something and then you rub it I mean you're cleaning it pretty good now
I'm not getting everything off of it that's all right so I've ran into two problems one is that
or three problems one is that one is the speed adjustment and then to make the speed adjustment
even worse one of the weights was broke loose so I had to solder it back on so basically the
the little metal piece here had a fracture right where it was and it was broke off
I soldered it on well the problem with that's going to be that one's heavier now
but it's also stiffer now because of the solder which means it won't go out as far
centrifugally which should mean that the um it won't go as fast right is that right
so I don't know it might kind of it might work I don't know it's gonna be out of balance a
little bit but I don't know that that matters it just needs to spin really fast to turn the
the um turntable I guess the whole point of this so you can adjust the speed okay so uh I'm gonna
keep cleaning stuff and putting it back on okay so I got everything cleaned up here
I'm very happy with that I got the gears and shafts cleaned up um and then uh I needed to
mess with the motor so this motor I can't figure out how it goes comes completely apart I didn't
take it all the way apart but there is not a e-clip or c-clip like I thought there's just a
that's just a uh a washer it'll move around if you mess with it um so what I did was
I took the three screws off this back barrel they it will not come off this shaft so I took
the three screws off this back barrel I didn't want to force it or anything and I slid the barrel
up a little bit the the spring of course is attached to the barrel and then wrapped around
and then somehow it's attached to the center now you know on some of these there's just a
kind of like a a kink that it catches as it turns that's how the Victrolas are at least
um I didn't see an easy way to just to easily slide it out with it still being in the barrel
it was going to try to unwind on me and I don't want to completely unwind this thing
I'm not doing a full-on repack of the of the barrel or anything so um the grease looked
fine in there it didn't look all dried out or anything I don't know if somebody's
messed with it before or what but the grease looked fine it was moving around everything's
cool I added a little bit of oil to it to get the viscosity a little farther down if need be
you know make it a little less uh cakey but it looked it looked fine if I were to take it all
the way out clean it all off and put new grease in it I'd be putting like I said molly like
wheel bearing grease in it um that looked just like what was in there so I'm you know I just
left it but I guess you take the this off and then pull the whole thing loose and it's going
to unwind the whole spring and then you can I don't know how it's attached to the center shaft
in this particular model and then once you do that you can take this gear off I didn't see how
it was held on there must be some kind of clip or something holding the other one and then you can
do this one the same and work your way through it but I left that alone if I uh turn them by hand
both of them are catching so like they're the the two um springs are still attached to the
center arbor and the side barrel and if you push these a certain place it'll free spin where it's
no longer attached to the center arbor so you'd think that it would just pull right off but it
doesn't I don't know what's holding it all on but with that said it cleaned up pretty good
and uh I think we're good to put it all back together so I'm gonna put it all back together
then we're gonna grease it a little bit and then uh we're gonna test play it okay folks I've been
trying to figure out how to get the the spring apart so the motor barrel so I put it all back
together and wound it and it would just wind forever I was like man it must be wrong so I
took it back apart and if you turned it it would catch and you know the two were interplaying with
each other and you could wind it it's like man that's crazy so I kind of messed with a little
bit put it back together still wouldn't work you just wind it forever and I was thinking huh it's
almost like I'm winding it backwards right but there's only one way to wind it it won't even let
you go the other way it has a catch so then I'm trying to figure it out I'm thinking well maybe
the springs are in backwards or something like that well no they wouldn't they're not gonna go
through nobody would have went through the trouble to put the springs in backwards I don't think
anybody's been in it um and so if you let's see if you turn it this way you can see it it actually
starts catching I'm just barely turning it if you if I turned it all the way and catch it more
obviously right and the two interact with each other so I'm looking at it so I take it all
apart and what was happening was when I turn it that way the spring is tightening on itself
if I go this way the spring is tightening on itself and I'm basically going backwards so it
works backwards but it doesn't work forward because the spring's broke bam so we got a
broken spring I may be able to salvage what's left of this spring that's not the perfect way
to do it but if you can bend that around the thing and put a new hole in the end of it or
whatever it is that mounts in here that'll work but I'm gonna try to see if I can find
the correct spring basically we have to measure it and um go from there I still don't know what's
holding this all together I took it all apart there's something that makes it where you cannot
take the damn thing apart it may just be stuck but look how loose it is maybe it's just the spring
here is since it's in it's I imagine there's a hole in the end of the spring that's mounted to
the center arbor that way and so maybe uh until I get that off this arbor can't go through the
end of the barrel and then we've got a similar thing going on down here we can't get the arbor
out either way because it's still mounted to the spring all right so I want to see if I can
tear out this middle piece and then we'll get to finally get a look at that arbor okay I finally
got it apart so there is a little it's hard to see but yeah there you go this little rivet here
is also on the drum that's why you've got that bump on the drum it's a rivet we'll call it
if I can find it okay and at the end of the spring there's a hole to attach to that rivet
and then at the inside of the spring there's another hole to attach to that rivet and it's
just as easy as that um I might see if we can get one of those I don't know the length of it though
you could unwind it and count the whole thing I guess so it's a uh one inch or so by who knows
how many feet you know there's a math you can do to figure that out I don't know how accurate it
would be 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18 there's 18 concentric circles
but they're not evenly spaced so I don't think it would um but 18 so let's see this this outside one
would be let's let's spit ball it folks shall we the outside one would be
10 inches maybe maybe I'll say nine inches so nine inches and there's 18 of them so the most
that it could be would be um that's three-fourths of a foot so it would be three-fourths of 18 so
it would be something like four it would be like 12 13 13 feet would be too long because the inside
ones are nowhere near 10 inches or nine inches or whatever um yeah so we've got three four five
six seven that are probably more like an average of six inches so three and a half so eleven of
them uh are like nine inches 99 inches and then uh seven of them are more like this is very
scientific people seven of them are more like six inches um that's 42 inches it's 141 inches
that's my guess 141 inches maybe a little a little shorter what do you think I think it makes sense
this spring seems a little thicker than the Victrola ones that I've done I mean I can
barely move it also you know this is whatever people talk about how dangerous these are to
change this one probably is because it's pretty stiff though the Victrola ones I've done are
probably half this thickness or they seem that way and they're just not as big of a deal you
can wind them in there real easy I didn't have any problems with it this one's gonna be a little
tougher so that would be like uh what do we say 143 inches or something I think that would be
long but we'll see um so the reason that I gotta guess I could pull it out and try to measure it
but that's that's gonna be a pain um the reason I'm uh trying to guess is because the um there's
no information on these online so nobody's gonna tell me oh the one you need for a path model 50
model 50 is part number 8325 there's no way in hell and everybody always says oh we'll contact
this guy he really knows his stuff yeah they do but he don't have the damn all the spring numbers
memorized from some obscure uh pathway model that nobody else has there's only two pictures of any
of them on the internet and the thing's 100 years old so I kind of got to measure what I got or take
a wild stab at it I prefer taking a wild stab at it so uh let's see if we can find one online
okay so I looked up at the phonograph shop they've got a whole bunch of different sizes
and uh I kind of went around and measured the first one and then figured about three of them
that length and then measured where I was there and figured about three of them that length and
measure where I was I figured about three of them that length and I came up with just the best I
could eyeball it about 104 inches so it's a lot it's not 12 feet so 104 inches would be more like
nine feet um not quite nine feet but I'm probably off a little bit so nine foot would work so we
need a nine foot eight might be a little too small the other thing that they want to know is the
the diameter of the arbor let's I'm trying to touch any of this crap right now with my
my stuff because it's all freaking blah blah blah three-eighths you know diameter of the
arbor of the arbor is three-eighths so 104 inches three-quarters of an inch tall
and three-eighths inch arbor okay so I'm looking at their selection they've uh looks like most of
them are 0.022 or 0.025 mine's definitely thicker than the ones that I've done in Victrola's
so I think it's the thicker material so it's 0.025 I don't have a caliper here that I can
measure it with so this one is 10 feet long and I like I said I just counted it out I'm
pretty sure 10 feet's too long um they do say that it it fits the Path-A3
um and the diameter arbor is three-eighths inch okay I don't think that's it so 10 feet's too
long in my opinion I like this one now look at this 0.025 so it's the thicker one three-quarter
inch and eight foot six inches which is uh 102 inches and I counted 104 inches just spit balling
it so it's so close I kind of got to go with this one don't I they're saying that this one is for um
Regal and Swiss Motors somewhere I saw them mention
Swiss Path-A so maybe Path-A did Swiss ones too I don't know um and so I'm gonna roll with this
I think this is the one this is our best option I believe okay folks I got the new spring in from
the phonograph shop it's kind of a pain putting those in but I did get it in there is a hook that
you got to get hooked to the outside and then you got to wind it in what I do is I wear a big
welding gloves and it just makes it a lot easier you don't have to worry about cutting yourself or
anything and you kind of have to muscle it in I didn't film any of that or anything because
if you don't feel comfortable doing that you don't need me showing you how to do it
you're going you have to decide for yourself if you want to do that okay so I got to put some
grease in it I'm gonna put some grease in the other one while I'm at it I'm not going to remove
that one and re-grease it that would be the best way to do it but what I'm going to do is I'm going
to add a little bit of oil because the problem that they get is the grease gets hardened this
one doesn't seem hardened at all but I'm going to add a little oil to it to lighten it up a little
bit and then I'm going to put new grease in this one and then put it all back together I got to
clean up those sprockets and put new grease there too but I got the I got this new spring in it
seems to be the exact size I think we probably did pretty good there the original one might have been
nine feet instead but it's pretty close so I think that'll be just fine okay so I've got it
back together um I can't lift it like the pinions are sticking into the cardboard below it but if I
lift up on or push down on this it's as if we're taking the brake off maybe it is lift up on it
nope I think well whatever I think we're good I just need to wind it up and I think we're going
to be fine so I've got it all back together I need to watch the previous video to make sure
I put it all back together in the right order one thing I'm worried about is this ring I don't
remember where that came from it's been about a week and a half um and then we're ready to put it
back on the board if I've got it all back together right all right folks so that's all for this week
stay tuned to next week while we keep working through it leave your comments down below what
you think so far hopefully we can get this thing moving doing its thing and uh all put back
together properly and we've still got to work on the cabinet we've still got to work on the
reproducer so there's a lot left hope you enjoy these phonograph videos to me it's fun
taking something old and giving it the respect and the attention that it deserves to the best
of my ability at least and getting this thing back together so we will see you next time
dust covered circuits sitting on a desk been lost in time 50 years of race
reading schematics and thrifting old parts one more last last week oh poor new spots
tracing faded traces vacuum tube blows get it back to working by the end of the show
one at a time we fixin to fix some easy as can be amateur repair time for you and me
little machine you carried history time to trace your back bringing this to history
from broken to singing learn preserve
cables needle switches tangled up patient Google searches
tiny copper tape every star brittle capacitors
tracing faded traces back into
we fixin to fix some easy as can be
it's amateur repair time
