Repairing A Ron-Car Ltd. 1990's Miniature Carousel - WHAT IS THIS?

Amateur Repair Time
257 followers
938 Video Views·May 31, 2026
I've only seen this one.... also includes a Sony Cassette Tape Player Repair (Kind of)....
Check out our Patreon page, for all of our channels. Contains outtakes, concise arcade repair tips, bloopers, repair FAILS, Audio youtube wouldn't allow us to upload, and much more!
https://patreon.com/JoesClassicVideoGames
------------------------------------------------------------------------------------
AI Generated·May contain errors
Ladies and gentlemen, welcome back to Amateur Repair Time.
Yes, I have a carousel. I was at the flea market one day walking around and this guy had this
sitting on the table at the flea market and I thought it was pretty cool. And the guy always
has good prices on everything. And so I started looking at it and I thought that damn thing was
probably really expensive when it was first made. It says the Carlyle special edition and then it
says carousels by Ron Carr limited. It's got like a mahogany case and it's in it's kind of beat up.
This guy that sold this sells like tools and like lawnmowers and furniture and stuff at the
flea market. And so it's usually bigger stuff and he just happened to have this. I don't know where
he got it or anything. And then over here it says Steve Dunaway and family in appreciation
of friendship. What does that say? In appreciation of friendship promotion and sales
Christmas 1991. This thing I would I would assume was over a thousand dollars new. Probably more.
You know and this is one of those like really kind of overpriced things that you could buy
back in the 90s. You know grandfather clocks a lot of them were like that too. They still made
really high-end grandfather clocks that were five six seven thousand dollars back then that weren't
meant necessarily worth that. But it was just considered like a status symbol. This is kind
of one of those things I think. It was just seen as something that was really kind of opulent.
I think that's my assumption. So it says Ron something that's the guy that made it.
Okay and then over here it says 109 patent pending 19 something or the other Ron Carr
limited. And then there is a fuse holder. There's a couple lines which I guess could be
to connect speakers. And then there's a fuse holder with the top missing.
And then there's an on off switch. Okay so if you look at the actual carousel
it appears that everything's going to move and that the horses are all going to go up and down.
There's a little sign here. Watch your step. It's got um eight horses on it. Catch the brass ring
for a free ride. When I was a kid my dad took me to the Santa Monica Pier
because he wanted to show me the carousel at Santa Monica Pier. And I think we rode it. I
can't remember. I was little. I was probably five. And I recently a couple years ago I actually went
back to the Santa Monica Pier and it's still there. I walked in and was able to look at it.
I don't know maybe I was just able to look through the windows. I can't remember. But
it's all still there right where it's always been of course. And you know so as a kid you know yeah
I like carousels. And then about a year ago I started going to Carowinds. And there is a really
old carousel at Carowinds. I think it's from 1923. And it's one of the Philadelphia Toboggan Company
carousels. And it's just you know complete work of art. And it's old time. You know I
kind of like that kind of stuff. So I was walking around the flea market. I saw this.
It was sitting there. And I'm thinking I kind of like it. And so I asked the guy. And you know
we deal with them all the time. And I asked the guy what he wanted for it. He's like oh it's really
expensive man. It's really expensive. And he's like I want a hundred. And I think we settled
for 60 bucks. It's a little beat up. And it doesn't work. But I thought you know what. I
think I'm going to take this thing home with me. So then it's been sitting around the house for
probably a year. And so this weekend or this last week I watched the new movie about Michael Jackson
called Michael. And in the movie it shows him in his room at his family home where all the
Jacksons live. And it shows him in his room. And he's got a snake in there. And his sister's in
there. And there's freaking records and everything. And a jukebox. And over in the corner
there was a carousel that looked almost identical to this. Spinning around really slow. And lights
coming out of it and everything. I don't know if this one does all that. But and I thought hey I
ought to work on that carousel I got. You know so I decided I'd do a video on it. So we got to kind
of either. I don't have the fuse holder. I've got some of those. But I don't have them here.
But we kind of got to rig something up. Maybe with a jumper wire or something to see if this
thing will start up. And then we got to figure out about the music. This thing has a tape player
in it. But the tape's missing. So we got to figure out if that's still working and just what's going
on. Now I tried to do a little bit of research on this thing. And I couldn't find much at all.
So let me show you what I did find. Maybe your luck will be better. Okay so the most significant
thing I was able to find was this. It says Limited Edition John Paul Carousel. Limited Edition
Miniature John Paul Edition Musical Carousel by Ron Carr Limited. Featuring 8 horses,
over 300 lights, 16 brown illuminated wood roof sections, 16 engraved rounding boards,
with 8 mirrors. Number 39 of 50. Now ours said what 130 or something like that.
Mounted on a wooden base. Original catalog from Ron Carr Limited included with the lock. Carousel
measures 16 high, 12 and a half wide by 12 and a half deep. Overall 23 inches height. So this is
the same as ours. Providence of Knoxville, Tennessee collector. Condition fully functional.
Some minor dings of the wood base. Okay it's sold for $454. Very similar. Slightly different
design. This one may actually be a little nicer. But we don't know yet. Look at all lit up and
everything. It's got a little organ designed into the inside. Same sign. Did you ever ride a carousel
with the brass ring? I think the one at the Santa Monica Pier is like that. But I rode one when I
was a kid somewhere. And yeah, so if you're on the horse there, you lean out and there's a brass
ring on the end of this thing. And you try to grab it with your hand. And if you hook it, the next
time you go around, there's a, well the one I went through, there's a big face over in the corner like
a clown face. And you throw the ring and try to make it land in the clown's mouth. And it's like
six feet wide and three feet high. So you can kind of do it, right?
And you got something for that. This says free ride. So I don't know if you got a free ride or
you got a teddy bear or what it was. But I remember that when I was a kid. I was born in 78. So all
that would have happened in the 80s sometime. So it's the same base. Their base is definitely
in better shape than mine. And you can see it looks like it has the little watch your step
sign there too. This is the other side. Looks the same as ours. Oh, the number is the same number.
Oh, the number is the model number it looks like. There's the little horses. There's the fuse.
Oh, it looks like the one might be a volume knob and the other one's a fuse. Oh, okay.
Yeah, so we're missing the fuse cap. Yeah, see how it says 105. I think ours said 103. So there's
just different ones. And his says limited edition 39 of 50. Ours doesn't say that.
And then there's the signature Ron so-and-so. And then here's the paperwork the guy has for it.
He's actually got a catalog. It says the Ron Carr limited the most unique carousels.
All manufactured in the USA. Childhood memories recreated. 1991 exclusive product line
and information brochures. And remember ours says 91 as well.
And then it says he's on Ferris Drive in Harrison, Tennessee.
So the gentleman could have been making these by hand and selling them out of his home.
Okay, so strangely enough, if you search, so it says Ron Carr Limited. If you search Ron
Carousel, so Ron Carr, the Carr is like carousel, right? If you search Ron Carousel,
it brings up a bunch of these, which are nicer, that are made by a gentleman named Ron Lee.
And you know, this is only on one website, but these things are like $10,000.
This is a much nicer, more detailed one though. But if you look, I don't know.
There's more going on and I don't really care about what it's worth. I'm just saying
I can't figure out what's going on. So the Ron Carr guy, is that the same guy?
Is that him starting another company called Ron's Carousels, Ron Carr Limited, you know?
Ron Lee. And by the way, my name's Ron too, if you don't know.
It's just, I can't figure out what's going on with it. It's something that, you know,
there's just not much information out there. If you search Ron Carr Limited,
hardly anything comes up. So, but this guy Ron Lee made a ton of these. There's just freaking
tons of carousels. And then there's also this, it says, Ron Lee's World of Clowns Factory Tour,
perfect carousel, which is never used. So it looks like the same guy built full size carousels. So
I don't know. So there's something weird going on here with the carousel stuff. But we're just
going to try to get ours to work. I was trying to find like a manual or something or schematics,
but it should be simple enough that we can figure it out, hopefully. So this is the bottom of it.
The carousel part doesn't weigh as much as the base. This thing is really heavy,
like 20 pounds or something like that, which isn't the end of the world, but it's,
you know. And, you know, they were saying 12, that the one was 12 inches. This one's bigger.
That's probably, I don't know, 16 inches. Let's see here. And we're doing inches, people. I know
you millimeter people are going to be upset, but we're doing inches, 8, 16,
little over 18 inches square. And there's a trap door and then another big base. And I don't know
if the whole thing is going to go down through the case, like I can lift the case up over it or what,
but I'm going to take this screw out first and we'll see what's underneath the door.
So it is a, it appears to be a decased tape player. I have no clue if we're going to be
able to get that to work, but, you know, you got to imagine it wasn't used much.
It might have a broken belt in there or something, but, and really how much did
they play this carousel? Probably not very often. Okay. I want to see if there's any way to take
the whole base off without screwing up the very complex looking carousel part.
Okay. So most of it slid out of the bottom, but you can't go all the way because the canopy is
too big for it. And the canopy can't be easily removed because there's lights all in the canopy,
like all of these lights light up. That's all wired up. So I've just kind of slid it
back a little bit where we can get to things a little bit. There may be a way to completely
disconnect the top canopy. I don't know that we've got those lines running up there to it,
but you can see there's the tape player. And then there's some little stuff here. Look,
there's like a switch there, a switch there. I wonder if that's more pieces of the tape player.
There is a speaker there and another one here that have been decased.
There's a transformer here and another one down here. I see a large cap. I don't know the best
way to service this thing. How do you get to anything? You can see the wood has been broken
loose here where the screws go. He didn't make it all that easy to take apart, did he? Yeah.
Let me see what I can think of. Okay, so I was able to get to the back of the fuse
and jumper over it with a wire clip temporarily for testing purposes.
Yeah, I can't tell how you get it all the way apart. Look how complex the inside of it is up
there. There's a whole bunch of lights and there's like a gear that goes all the way to the top and
it's connected to the canopy, which is going to have a whole bunch of lights on it, it appears.
But I was able to put that jumper on it. So let's plug it in and see if the thing will move.
I'm going to kill the power if something bad happens. Yeah, she's moving. No lights though.
Okay, so I'm going to turn this switch and see if it turns it off.
Yeah, okay, so we got a good power switch. Yeah, and this other is a volume knob,
but there's no tape in it. All right, so these two are not moving up and down.
These two are. I wonder if they're, they look kind of bent. I don't know. It's running pretty slow.
It's probably been shut a while. Oh look, the door is open that the little guy goes in inside
to the play the organ. Those two are moving. Those two are moving. There's something wrong
with the linkage to these two. I wonder if that's just the speed that it runs and you can't really
make it any faster. I mean, it's pretty weird, but I kind of like it. And where are all the
lights? What's up with that? I wonder if there's another fuse inside or if the wires are broke or
something. I wonder if that's off. So it's got some issues. The lights don't work and the two
of the horses don't go up and down. And it seems to move slow. You'd think it would move faster
than that. And the tape doesn't work. Okay, so we're looking in one side and just below the door
to the tape player there is a fuse. That fuse, I don't know what it runs to, but that's it right
there. I would think it's the lamps, right? Wouldn't you think it's the lamps? So I'm gonna
try putting a fuse in it and we'll see if that gives us any lights. Okay, so I found a half amp
fuse. That might not be big enough, but better to start at the bottom, right? Yeah, it wasn't big
enough, but the lights were on. All right, so it's got some lights up at the top that are supposed to
light up the whole carousel and they're not loving life. Looks like they're getting a little better.
I don't think they're actually supposed to blink. I think they're just dying a slow painful death.
Yeah, because if you look at some of the red ones, it's the same ones that are on the other
things, so they should be on. They're just, uh, it's probably twisting and it's losing contact.
They may have some kind of ring connection, you know. They're on something that's moving,
so it may have a wiper running that, which if it does, if we let it run, it'll probably fix it.
As it turns, it'll clean itself. They're not super bright though, because LEDs wear out after a while
because LEDs are junk. Look, I'm not trying to get into the LED discussion here. I guess they
didn't really have much choice on this little carousel, and these two horses have not fixed
themselves yet. There's a little gear up there, a little thing that turns, just like on a real
carousel that makes them go up and down, and for whatever reason, that one's not turning,
but the other ones are. It'd be interesting to figure out where the wiper is for that.
I wish I could take the the top off. If I could take the top off, that solves all the problems,
because this part here will go all the way through, and we can just lift this off,
but the top is connected. There's wires connected, and I can't see how you loosen it up.
It's all soldered together. It's kind of like, did you remember those old tin toys that they
made? Especially in the 90s, they made a bunch of reproductions of the older ones.
You would see them all the time. It'd be like a little house or a little mill with a little
water wheel on the side that would turn if you put a battery in it.
Yeah, so this is all we got so far. All right, so I've got it turned back on its side,
and if you look up above it, I'm just trying to see how to take it apart or anything. If you look
up above it, there is a wheel at the top, and if you look on the right, you see a bar,
and if you see it go around and you see how it hooks up, that hook is what the
horse pole is attached to. It's just like a real carousel, and then if you look down here,
you can see another one, and then you see one that's just sticking in the wrong spot. That
must be the one that's not working, so it's not lined up. It's been pushed in somehow,
so we need to pull that back out to where it's in the right spot, and it lines up on that gear.
See the gear? It's right in the center of the screen right now. It's like a gear with a worm
gear, or what do they call that, where it changes from vertical to horizontal, and so where that
bar is sticking in, that's just out of place, so that's why that's not moving. I'm trying to see
how to disconnect this thing, and I just can't see it.
If I could disconnect the top canopy and just slide it out, then I could get to all of that
stuff. It'd be real easy to work on everything. There must be a way that that canopy just slides
right out, but the canopy has wires on it, too, so this wire here appears to be running through
the center, and it's probably somehow up near that gear. It must be coming out of the center
right up in there somewhere, and it must be on some kind of wiper that can spin around,
because the wire would break after it turned around a couple revolutions,
and whatever that is, it must be dirty and needs cleaned. Again, if I just keep running,
it'll probably fix the light thing, and the speed is probably about as fast as it can get.
They've probably just got it geared to where it doesn't move that fast. If you think about it,
if they're trying to make an accurate scale replica of a carousel, that's about how fast
the thing would move if it was a big one. It would look cool if it was moving a lot faster, but
if they're trying to make it like a real one, they don't move really fast at all. People get
blown off of them. Of course, that would be a fun carousel. Maybe we should invent one.
So, there's the center shaft, and look what's up there. You can barely see it. Let me see if I can
figure out the angle so you can see it. Well, you're not seeing it. I can see it with my eyes,
but for whatever reason, the camera is not picking it up. There are two leaf switches up there.
You can kind of see it right there, like on a pinball machine,
and they are attached to something in the middle that is making the lights work.
So, those are dirty. So, like I said, if we just keep running it, it'll probably clean it enough
that it'll work, but if we can get this top off, I could fix the horsey, and I could fix the
lights too. Worst case, we could spray the hell out of it with some contact cleaner and probably
clean it up. Okay, for our next stunt, we're going to attempt to play a tape in it. Now,
I don't know if this tape's any good or not, but they have two buttons here. One is stop and eject,
and one is play, and it looks like they broke off the other ones on purpose. So, I don't know if
that tape player is going to work. I've got it on its side. I put the screws back in it so that it's
level, right? So, let's see. Hopefully, the tape player still works.
Yeah, she's working. I don't hear any tape. I sprayed some contact cleaner on the lights.
They're about fixed. Come on, baby. Come on, baby. It was at the beginning of the tape or
the end of the tape or something. We're getting some... I mean, it's amplifying. You see the belt
obviously is fine or it wouldn't be spinning the... Okay, let's try to... Let's try to...
Well, we could have flipped it, but now I don't know which side was which.
REO Speedwagon to the rescue. It's working.
All right. So, I cleaned up the tape head, and I cleaned up the potentiometers,
but it doesn't sound that great, and I think it needs recapped. That little
Walkman that's in there, and the lights are pretty good, but not quite there yet.
I may have just been a bad spot on the tape because I can turn it up now. It sounds fine.
All right. I was able to do it. So, if you open this door, and if you slide it like I was doing,
you take the screws off the bottom, you slide it down as far as you can, the canopy will only go
so far because it can't go through that hole. So, it's eventually going to hit the frame there,
but it'll give you a little bit of wiggle room. So, then I was able to reach in with a small
screwdriver and remove the four screws holding the motor in place, move it out of the way.
Once I did that, the four screws that hold the center shaft in, you could get to the back two
here, and you can get to the other two through that door. Okay. Once you get them loose, or maybe
before, the wiring for the lights solders to these two pins here. So, you can desolder them
through the door as well. So, once you do that, the whole thing slides out, and you can lay this
down and then work on whatever you need to work on. We'll look at that separately and see if we
can figure out what's going on with the canopy and if we can get up in there. I mean, I assume
there's some way to do it, but we'll see. So, I think what I'm going to do, that doesn't need
to be hooked up to test the tape part. So, I think what I'm going to do is use some more contact
cleaner on this and recap it if we need to, to get it to sound right. It should sound a lot
better than it does. I've cleaned the tape head and everything, but it just does not sound good
at all. So, we've got to get that going, and that's next. So, I'm going to try recapping that
and just see where we get. Okay. So, I've recapped most of it. I've worked on it, worked on it. It's
a Sony boom box that's been taken apart. So, you can see by looking at the speakers, it's just a
little Sony tape player that they took apart, which is a pretty good idea.
And I've been messing with it, messing with it, messing with it. Can I figure it out? Oh man,
if I mess with the volume control, it seems to change it a little bit. There's like a grounding
thing going on where you get some weird humming, depending on if you're touching parts and stuff.
I finally figured it out. There's two earphone plugs. I'll try not to get electrocuted, electro
killed. So, the earphone plugs, watch this. The song's fading out. So, it's those banana jacks
that have to touch to complete the circuit to the speakers. And if those aren't touching,
basically it's open. So, if those are corroded and they are,
it makes it where the sound's all screwed up. So, I think that might be the whole problem. So,
I'm going to clean those up and get them where they're touching how they're supposed to without
a plug inserted in them. And we'll see if that fixes our issue.
Okay. Now, if you look on the left, you see that gear with a nut on it and then the pin sticks
through it. It's like thread all. It doesn't go all the way, but it's a threaded rod. And that
rod sticks through the other side. And that's what the horses are attached to. On the right
is the same thing, but the nut has came loose. And the crazy thing is, is that the rod is way
too long. So, on this one, the rod sticks through about half an inch or three eighths of an inch,
would be a better way to put it. On this one, on the right one that's messed up,
the rod sticks through like almost maybe five eighths of an inch or something like that. So,
sticks out so far that it looks like it hits the middle piece there. So, I'm going to carefully
see if I can get something up in there to turn that nut back to get it over there on the gear,
to hold the gear in place. So, it'll make that one work. And then if I get that right,
I might be able to reach up in there with some kind of snippers and cut the end of that damn
gear off. You would think, oh, well, they just pushed the rod through too far or something.
Nope. It's the right length. It's just for whatever reason, the inside of it's too long. I
don't know why it would be like that, but that's how it appears. Okay. I'm mistaken. It is correct
from the factory, but it's just messed up. So, right there is the... I don't know why I can see
it better with my eyes, but I can't show it to you on the camera. You see right there, that's
one of the posts for one of the sets of horses going up through the inner ring. And you see
that post is bent at almost a 90 degree angle on both sides. So, it bends straight down so that it
can grab the horse. You see the same thing is going on on this side of it. It's bending almost
straight up to grab the horse. Well, if you go over to the other side, the one that's messed up,
you see on the outside, it's bent at a 45, at a 90, like it's supposed to.
But on the inside, it's not bent like that. It's bent... It will not show.
Maybe over here? Maybe? Nope. It's trying to mess up the color. It doesn't like the light.
All right. It's not bent at a 90. The whole post has been stretched towards the inside. It must
have somehow got bent and then got pushed up against something. And then as it turned,
it stretched it more flat. So, that whole post needs to move maybe with some pliers or something.
I can reach up in there and bend that back out a little bit to get it all kind of straightened up.
And then that should shorten the length of the post and pull in the extra inside. Although,
there is a bunch extra inside and it's bent too. So, I got to try to straighten it too. So,
let me see if I can bend on it with some pliers. Yeah, you thought I was going to give up,
didn't you? Come on, people. Why would I give up? All right. So, I was able to bend. It didn't
really bend. It just would move. I noticed if you turned the top, it would start unthreading
itself from this lamp thing. But the problem was you couldn't turn it all the way because
the cord would break loose from the top. So, I turned it quite a way and then I
angled it up. I don't want to say bent because I didn't permanently bend it or anything. And I
reached in with wire clippers, cut it loose, and then since it was no longer attached, I could just
spin it right off the top. So, now we can fix it properly. Okay, folks. It's all coming together.
I found the problem with the twinkling lights. Look at this. The wires aren't soldered on.
They're just hooked on. Huh. Well, that's a mistake. All right. So, I'm going to solder
those on and that should fix our problem where they come on and off, on and off. I figured it
was this being dirty, but this is so hefty. I couldn't find anything that was obvious,
but then I finally noticed the wires are loose. Okay. All eight horses are moving up and down.
Got that fixed. All of the lights are working. There is one out on the very top. I couldn't
figure out what's wrong. I think the LEDs just screwed up. This was the one that was
really bad. I got it working. That was the last one to get working.
The cabinet, I used a little Walnut Restore-A-Finish on it. Now, it's kind of
like a mahogany finish, but I've found there's a whole bunch of different colors of mahogany
and this walnut was closer than the mahogany was. So, if you don't know about that Howard's
Restore-A-Finish, that's the greatest stuff of all of the times. Okay. You just put a little
bit on a paper towel, use it like a polish. It's basically like a polish, but it's got a little bit
of stain in it and it will just fix up all the stuff. You saw there were nicks and stuff all
over the place. Just go over it and darkens it up, blends it right in, makes it look great.
So, yeah, I think we're pretty good. I've got the sound turned down so I don't get a copyright
strike. The drawback, the downfall of whoever made this, Ron Carr, is that Sony tape player
isn't the greatest. The audio jacks in the back aren't the greatest and the audio pots in the
back aren't the greatest. This one though has been abused. I mean, if it was sitting in somebody's
house on a shelf, it might've ended up in a lot better shape than this one. Obviously, this one's
seen better days, but I think we've got it completely functional. So, the potentiometers
are still scratchy. I sprayed contact cleaner on them about four times. I can't get them any better,
but you can. I think the song's fading out. It's my least favorite Beach Boys song anyway,
and we got a hum problem on some parts of the tape. So, I don't know if that's the tape or
there's a bad ground somewhere or what, but the audio section is definitely the weak point.
It's not high fidelity at all. Yeah, the tape player just doesn't sound very good.
I just can't quite get it where it sounds good enough to, uh,
maybe I just got it up too high. I don't know.
So, that's kind of the weak point, but you could, you know, you could fix that pretty easily. You
could just put a, uh, a different one in there or you could rig it up with like an MP3 player
or something. Maybe if I leave it real quiet, it makes it mysterious. That's better anyway.
And they'll be like, where's that music coming from?
All right, folks. So, that's that. I hope you enjoyed it. Leave your comments down below.
If you can find out any information about these things, Ron Carr Limited, let me know,
or if anybody remembers them. Maybe, uh, someone tried to sell you one of them back in the day.
Um, let me know what you think, how much you think they were. I think they were probably a
couple thousand dollars. I really do. Um, it kind of reminds me of like the Thomas Kinkade,
uh, stuff. You know, that was art, obviously, but, um, a lot of that stuff was very expensive.
All right, folks. So, I'll see you in the next video. Hope you enjoyed it.
