4 Months of the LIFT

The Technology of Old Crossbows
4 followers
1 Video View·May 24, 2026
4 Months of the LIFT
AI Generated·May contain errors
Video Summary
AI GeneratedThis video provides a technical review of the Dark Owl Archery scope and UV slider, alongside an analysis of recent bow engineering. The discussion emphasizes a shift toward comprehensive redesigns of risers, limbs, and cams, highlighting significant gains in efficiency, weight reduction, and value compared to typical incremental industry updates.
Comments are disabled for this video.
They did so much work to this bow.
You don't normally see that in a year
and you people out there should really appreciate it.
Cause this is not normal one year innovation.
This is three years worth of innovation
in one year's worth of bow.
Hi guys.
Dark Owl Archery.
I've been trying it out for a little while.
I kind of like it.
I'm actually hunting with it.
Shot a couple axis deer with this phase four.
I like the scope a lot.
I have this one on a Tetra, Tetra Rise.
And I'm into it.
So the three pin post,
it's the most beautiful sight picture.
It is super clean, but it does come fixed.
You have to know basically your arrow trajectory,
your speeds, when you buy the sight.
I have three different speeds here right now.
And we are looking at my fastest bow.
We're going to put the fastest speeds,
which is that 290 to 300 feet a second.
That's what that one is.
And it's funny because I shoot 291 to 300 feet a second,
depending on if I'm using 75 or 80 pound mods.
So it'll be interesting to see if that actually works out
right for you because of your length.
So it's not just your velocity,
it's your distance from peep to housing.
So that might not work out the way you want it to,
but I'd still start with that.
And it will be close though.
Definitely 20 and 30 will be on and off.
The question will be 40.
Is it 40 or is it 38?
You know, you can make your own.
I believe for an extra fee,
you can put whatever you want on your scope.
So maybe you want to put a podium archer.
Oh, snap.
Look at that.
That's a nice fit.
Should be clear.
I do got to say that UV hit it out of the park
with the ergonomics of the slider.
Like the size of the wheel and the index flipping it up.
It is.
Yeah, there's very little to ask this,
that site to do that it's not already doing.
Honestly, I do wish it had a zero stop 20,
like a way to independently set.
That's the first thing I messaged them about.
Yeah.
Where's the stop?
You need to stop at the top.
I think it'll have in the 2.0 version.
I actually guarantee it.
I would be shocked.
Well, there's not much they left to do
because they've like done everything.
You've been working out?
I know.
And I text you.
No.
I text you to bring workout gear and you said.
Yeah, that's what I'm doing.
So bring your workout gear and you said no.
I said, hell no.
I was like, no.
Do you have anything to ask?
No, when I'm done here, I got to go over to my cousins
and put my tracks on my razor.
All right.
So this, I'm assuming, goes in there.
What about this guy?
Does this fit better?
Seems true.
This is what came.
I think we should use what the dark owl boy, Cody sent me.
No worries, it threads the same.
Ah, just right.
Like a glove.
I mean, when you get that where you want,
you like crank it.
Man, look at that strength and power.
I like that noise.
That was a good noise.
You don't ever feel,
you'd have a situation where you want to dim it down?
Uh-uh.
Do you?
I have a dark spot.
From a hunting standpoint, I don't know why I would,
but I would also state that if you just simply move it
to the bottom, it won't affect a thing.
That's true.
The light's not coming from the ground.
That's true.
All right, light's coming from around you,
but it's not coming from below you.
Unless you're shining a light up from your feet, then maybe.
Maybe I am.
Maybe you're on your phone with a light on
pointing up below you.
Whatever it is.
Try to move it out of there.
Lot of innuendo, post-innuendo stuff.
That is legal.
That is 100% legal.
It's not bolted to your bow.
That's the dumbest thing in the world, too.
Like, you can be sitting in a ground blind
and have a light attached to the blind.
That's legal.
But it can't be on your bow.
The language is terrible.
Yeah.
Like, this is so dumb.
I remember I had,
I was trying one at one point to run a fiber optic,
like all the way from up here,
all the way to my sight.
It's not on my bow.
It is not attached to my bow.
It's attached to me.
I had, like, a sleeve thing,
and you could turn it on right here.
And I just want to be able to shoot
during legal shooting light and see my pin.
From the bottom.
Like, how hard is that?
The other issue with this thing
is it seemed like they didn't have fine enough clicks.
Really?
Yeah.
If you, like, go out to a hundo.
One click is too much?
One click's too much, yeah.
That's fine.
That'll work.
Okay.
That'll work.
I would assume it's still level
because you've got a square-edged machine bracket,
a square-edged machine bracket.
I don't know why it wouldn't be level.
You want to put levels on it just to be fun?
Well, it doesn't hurt to check.
Well, you are cutting into my installing tracks time.
Yeah, we're going to hustle now.
She is not level, sir.
Let's get it leveled.
And then also, why we're doing this,
you have a channel with a video on the lift,
33 and 29 and a half,
that you published yesterday.
This video is probably a month later now.
Let's hear some of your doodads about it.
Like, some of your-
Oh, the lift's dope.
There's a reason that I got uber excited about it
is because traditionally,
when a bow manufacturer makes a new product,
they aren't changing every stinking thing
about that product.
Right.
Like, they'll come out with a new riser one year,
they'll come out with a new limb one year,
they'll come out with a new cam one year.
Nobody ever redoes a riser, a limb, and a cam.
It's very rare.
That's cool.
It really is.
And two manufacturers actually did that this year.
The amount of change they made in this bow
is so drastic that it's kind of hard to argue.
When's the last time you remember a bow manufacturer
dropping a half a pound out of their bow's physical weight
and not changing the dimension?
Or making it longer?
Do you know that this bow, this aluminum bow,
is like decimals away, like a couple from the carbons?
Mm-hmm.
As far as just aluminum?
Well, so, in my vibration test,
that had less vibration than the carbon did.
Interesting.
Which, you're talking vibe and noise
are usually a direct reflection of each other.
Talk to me about reflex.
So this bow has two inches of reflex,
which is not an ideal scenario for me.
I'd like to see it be less than that,
but they're like the Mach 30 that just came out has three.
So, I mean, it's all a parameter
of what you're trying to build, right?
So if you're on a 30 inches of axle-to-axle
and you're running a six inch brace height,
it's hard to not have a decent amount of reflex like that
because how long is your limb?
Where is it attached?
Your reflex point is off of here.
Yeah.
All right, so if you can't move the position back here,
you're gonna end up with a certain amount of reflex.
And it's usually a direct reflection
of how long your limb is.
When you start getting into really short bows,
which I shouldn't say really short
because this is pretty normal anymore,
but I'm gonna still call it really short.
When you start getting this short,
how long your limb is
is going to dictate how much reflex you have.
So if your limb is an inch and a half longer here,
you need to move that forward an inch and a half
to get the right brace height.
Well, that means your grip is that much farther
behind the pivot point.
So the only way you're getting around it
is if your limb pocket is wider.
And that's one reason why this bow,
the design of it actually appears to have less reflex,
but the negative aspect of it is the limb pocket's shorter.
So where the limb and the limb pocket attach
makes it have more reflex
than the riser geometry typically has.
That being said, it is a relatively phenomenally
shooting bow.
It's got a really wide stance to it.
Wide stance helps with the torque.
So the wider you make this,
the more you can kind of get away with this.
That helps.
I need a lot of that.
Get away with it.
Yeah, we all need a lot of it.
Let's be real.
Last question on this.
This is for y'all.
Josh, what's your draw length?
30 and a half.
Mine's 27, right?
So I try to tell people,
yes, I always go with the shorter bow
and I do a terrible job explaining why.
So give them like the technical term,
but here's the dumb knuckle dragger term is like,
I get maximum efficiency out of the 29 and a half.
I start at the bottom end on the 33.
So bows are designed to be shot at a certain size
and it's usually typically to the peak
of the length of it, right?
So a bow's designed to go to 30,
it's gonna be most efficient 29 to 30.
If a bow's designed to go 31 and a half,
it's gonna be most efficient from 30 and a half
to 31 and a half, right?
And we're just taking Matthew as an example.
So when you're running a shorter draw length,
you're better to shoot something closer to its peak
if you can,
because of the amount of efficiency
you're gonna get out of it.
If you put a 33 bow on you,
it's not gonna shoot super efficient.
Like it's gonna be way slower.
And that's just a by-product of this cam
is really designed to be shot on the long run
and then they try to make it fit shorter people.
And until we get to a point
that it's cost effective to make short cams
on a small scale,
because there's only such a percentage of people, right?
It all boils down to what fits the majority of people,
hence why they have these big adjustable cams
and these multiple modules.
I just cleared a section in my shop
that is three and a half feet high and eight feet long.
Of mods?
For just these two bows.
To cover every module they make.
Because now we have 55, 60, 65, 70, 75, 80, right?
And they're X.
No, no, let me finish, let me finish.
That's poundage.
And then you have an extra inch of draw length adjustability
in the bow that wasn't there before, right?
So now you have, I want to say it's 12.
And then you have two let offs.
Just to cover one.
So if you hang them and they're in packages this big,
if you take that in a package that big and space it out,
it's three and a half feet by eight feet.
And most dealers aren't gonna do that.
No one's stocking that.
No one's dumb as me.
Forget what it's like to stare right at a light
and try to look at an adjustment.
Key grip.
I just can't, it was hitting me
just right to where I couldn't see it.
Now you're doing something.
Do that again better.
High five.
All right guys, so we got the dark owl scope
on the UV slider.
I'm gonna run with this for a while
just because I'm a tinkerer, right?
And I had Josh's help.
So Josh, I just want to clarify.
There's not a second axis independent adjustment?
There's not an individual scope adjustment.
So this is where everything adjusts
for your bubble and the rail.
And in theory-
Because it's married.
It's married.
And if everything's machine square,
which if that's not adjustable
and this goes into a square peg
and that's a square peg,
it should just bolt right on.
And it worked fine.
No issues there.
And it is a relatively easy swap to do.
There's just a screw underneath it
when you take it apart.
And it's easier if you take the head all the way off.
So as long as you have a square base
that you're going from scope to scope,
you should be able to interchange this relatively easily.
I don't even,
I don't know if they're even offering
the sale of the site without the head yet.
I think they are.
Well, they were going to,
but it always said out of stock
and you couldn't order it.
Okay.
Right.
So, and if they're doing a smart business plan,
if you really want that site,
you're going to order it with the head
they make you take, right?
They're not going to let,
you can't order it with a two pin head
or you can't order it headless,
or at least you haven't been able to.
I should get on and check.
It's been a little bit,
but so that's going to come on there already.
And then you can swap it out for whatever you want.
And there's lots of choices,
but this one's pretty slick.
It's definitely worth a good look.
It's clean.
Yeah, I'm going to run with it.
The pin is really tiny and fine.
And I like that.
And the speeds I'm getting right now are
with the 80 pound mods on a 425,
I'm getting 300.
What are you getting?
Speeds you've never seen in your life.
It's the truth.
Yeah.
I haven't set one up.
You haven't set one up yet?
No, dude.
You know how many bows I've like tuned
and videoed in like the last-
All I care about is the ones that are mattress.
I like the bow a lot.
I really do.
Are you going to go 29 and a half or 33 for out west?
So I have a 29 and a half at the house right now
that I may throw together really quick
because Sutton season here opens in a week and a half.
More than anything, I want to abuse the strings
and see what they look, how they wear.
Yep.
Because they're claiming some pretty impressive stuff
for a manufactured string that comes on a bow.
What do you think of my strings?
Honestly, for how long you've had it-
I got 2,000 arrows on it.
And I'm very familiar with how you treat your strings.
This is really, this is holding up really good.
Like what I have seen, I am very, very impressed,
which I'm excited about because to,
to put $150 type of string on a bow,
which is normally what you got to spend
to get these kinds of results,
they only had it at 30 bucks.
Oh yeah, and by the way,
they machined another half a pound out of the bow.
They redesigned the limb.
They redesigned the cam.
I mean, they did so much stuff
and only asking you $30 more for what you're making.
It's, it's amazing and impressive.
It really is.
And I, I'm, I am not a fan boy.
I hate that you get that when you say positive things
about, you know, the most popular bows in the industry,
but they did so much work to this bow.
You don't normally see that in a year
and people out there should really appreciate it
because this is not normal one-year innovation.
This is three years worth of innovation
in one year's worth of bow.
Most manufacturers don't do that.
I kind of expected a big jump
because last year they didn't change a ton.
Now granted, making a new limb system
with rubber inside of it is a big deal
and it'll, it'll hold up super well
and lower the vibration a little bit, which is cool.
Nobody else did that and that's a big jump,
but you didn't see a big output.
There's a huge output for you here.
So if you, if you are looking in the market,
you have to at least take a look at that bow.
It's damn impressive.
There you go.
The man himself.
Guys, head over to Spokane Valley Archery,
shoot the best 3D course in the Northwest.
That's yours, by the way.
His team go, you are fully stocked with all the mods,
$50,000 worth of mods.
At my cost.
At his cost and all the bows, but I'm stoked on this.
I know it's about a month later,
but just want to give you guys an update on my strings.
My bow is in time.
I haven't just timing once.
And like I said, I'm over 2000 arrows
and I don't even have the shot sense in yet,
which tracks your arrow count, which is pretty cool.
Love it.
Matthew's making some big splashes in 2023, 2024.
And I'm doing some tinkering, bringing you along.
Appreciate your support.
Catch you on the next one.
