MY 2024 BOW SET UP - Top to Bottom

Defending with Past Crossbows
3 followers
1 Video View·Apr 26, 2026
MY 2024 BOW SET UP - Top to Bottom
Comments are disabled for this video.
Hey guys, I want to go through my Matthews Lift, everything from top to bottom.
This is the L-Shape Stabilizer Kit that we do with AEE, they're on the website.
The reason why I don't run the bridge lock is because I love a 10 degree drop, you can't
do that with a bridge lock.
I do like bridge lock bars, they're awesome.
But this is a 15 inch, we have 2, 4, 5 ounces in the front, 3, 4, 5, 6 on the back.
That's an 8 inch bar.
The new XO Engage Leg Limbs, this is awesome, I keep those on.
I shoot with them on, I shoot with them off, they're great.
I have the Matthews 2-Piece, this is a low pro, so it runs super tight to the bow.
I like to keep that on there year round, 3, 4, 5, 6 arrows if you want, I usually only
run 5 with the gap right here.
As far as the rest goes, kind of the most important part to me is QAD MX2, and then
you can see right here I'm using QAD Wedge, looks like this.
I just love that that sucks in to your loop material, and then you can get that to where
it'll tie in.
So that's something a little extra I do, you don't have to do that, but I like it.
These guys are super important to make sure everything's quiet, you don't get a lot
of arrow contact, and then obviously the MX2 now has this dampening, which is super handy.
I'm actually running the match strings, these are the original strings, I got this
bow in August.
You can even see I have a backup set that I ordered with the bow, and I still haven't
put them on because these strings are settled, they're dialed, and I'm going to keep running
them until I need to replace them.
And then I even have backup ABV strings, those are loud, but I haven't had to swap out
the match strings, so I'm really pleased with the strings.
On the grip, these are the elk shape grips that we sell with Shadow Freak, they're
on the website, and then I have a little skateboard tape right here that I always do on the back,
and just love the texture of that.
That's good for about 3,000 arrows, and then I'll just put a new strip out.
Super simple.
As far as the sight goes, this is the UV slider, which I just absolutely love their platform,
and the ergonomics of sliding, too.
I mean, this is a flip, and the wheel is perfect, it glides, no slop.
It doesn't have a stop, but that doesn't stop me from not having to actor it and putting
where it needs to be.
And then you can see I put my own Dark Owl archery scope.
This is a three-pin vertical, and the pins are set.
Those three pins are set to my arrow's feet per second and my shot radius, and so that
is literally 20, 30, 40.
I'm gonna hunt with that.
I like a vertical sight picture.
You guys may or may not like that, but if you're interested, hit these guys up, they
can get you set up on that.
This is that new Earth riser tone, which is great, ambush green limbs on top.
I'm running the 75-pound mods with 80% let-off.
I did run the 80-pound mods for elk season.
I will probably do that, but for right now, it's kind of off-season.
I'm more interested in getting repped, so I just backed down five pounds on the mods.
We will ramp back up in August and throw the 80s back on and kind of start fine-tuning that
elk arrow.
I get a lot of questions about this.
This is paracord 550 with just a simple knot.
I just measured it to where I can get my hand in there.
You can see that it's through here.
This really comes in handy on steep downhill shots.
Got a quarter-inch peep up top, and then I have the Bomar nose button right there, loop
material.
This is what I'm using.
Let's talk about releasing arrow.
I know you guys are into this, so this is the two-simple.
I ran it the longest.
I like a handheld.
I feel like a handheld for me is a consistent anchor, and then once I'm there, there's no
movement.
I'm just pulling, and depending on how you ... I grip like this, so this thumb touches
my index, and then I slowly open my hand and pull, and I get great surprise releases.
This knob does not come with the release if you buy it off my website.
This is an aftermarket ex-Okie knobs.
This dude's on Instagram.
He makes badass knobs.
Look him up, but this is what I use.
I love the shorter neck because a short draw length guy like me can maximize his draw length
with a short neck as opposed to some ... Most of them will come out to here, so I like a
short neck.
That's why I love the two-simple, and it's a three-finger.
For hunting versus target, I do all my target practice with the Easton Axis Long Range.
I have shot a whitetail or two with this and had great results.
This weighs 447.
You have an elk-shaped wrap that I cut.
The wraps go down to about here.
I cut this much off.
The full size of the wrap weighs eight grains, but when I cut that much off, I get it down
to five grains.
These are AE hybrid HPs.
They are helical to the left, crazy, IP4 knock, and then down here, I have an Easton titanium
half-out.
They still make those.
They're 55 grains.
They look like this.
I just hot melt them in, and then this is 125 point from Smith Bros. out of Oregon,
and that is my practice arrow.
My actual hunting arrow, where I'm going to shoot animals this year, will be an X10 Parallel
Pro with the 55 grain half-out with collar.
This weighs 55 grains.
Yes, it's aluminum, but I shot the mountain lion twice with this arrow, and it performed
awesome.
You can see I still have a wrap.
I have a halo knock on here for four mil, and same veins, and this arrow is exactly
the same as this arrow.
The front and centers are very close as well because both of these are 55 grains.
The lengths are the same.
They fly and impact the same.
I just want to save these for hunting.
These are really cool arrows and fancy, and these are a little more like I can beat them
up and shoot them through targets and whatnot, and finally, people ask me about broadheads
for 2024.
We do not have a decision made.
I'm probably leaning towards an iron will wide non-vented, but those only come in at
150 something grains.
In the 125 department, I like the Slick Trick Magnum 4 blade.
I like the Grim Reaper Micro Hades 4 blade or 3 blade.
4 blades do seem to put a better square hole.
That's what we're probably leaning towards, and then also QAV, Exodus, whether it be swept
or regular.
Those are all, we've narrowed it down to those ones, so please don't tell me your suggestions.
I appreciate it, but I'm doing my own journey.
You do yours.
Find out what gives you the most confidence.
Thanks for watching Separations in Preparation.
