Installing a Boston Harbor CF-78133 42" Traditional Spinner Ceiling Fan

TV Electric Fan
2 followers
34 Video Views·Nov 9, 2025
Installing the Boston Harbor CF-78133 42" Traditional Spinner Ceiling Fan into th e testing area of the studio room. I maintain a positive opinion of this fan at this point. The installati on was generally easy with the exception of the switch housing cap being a very tight fit due to how many wires are present. No parts were missing, no parts were damaged, the finish quality of everything seemed reasonable, everything lined up properly, etc..
Today we are going to install a brand new old school 90s spinner style ceiling fan.
I recently became aware of this brand Boston Harbor that still sells a bunch of these
old school fans. This was made in February of this year. It's an SMC product and
I mean this is fantastic. This is a basic nice looking simple ceiling fan still made today.
You can buy as many of these as you want right now which is a really interesting concept because
most of the things you can buy today in large quantities are hideous. So we're going to install
this and see if this is any good. Also along the lines of things being any good I am testing
in this video which again just like the previous time I tested something in a video. I probably
shouldn't be testing this on an important video but I got a new camera mount because I used to
use this. This is what comes with the with the Goas Pro camera. I used this for several years
took hundreds probably of videos with this and it got the job done but it was always kind of
a little flaky. It would kind of fall off after a while and in more recent times this seemed to be
working less and less ideal. I think that the the medium mod and the microphone connector adds a
little bit of weight. Not a lot but it was just enough to take that which was barely working
properly and make it not work properly. I think also if you don't have any hair this probably
works a lot better because it's got this rubber stuff on the inside and it just slides around on
hair which is a serious problem for me. So I stopped having the best results with that once
I started using the media mod. It just became almost unusable so what I did instead was I
went around and actually got a helmet and I got a different mount for the the camera and I adapted
the camera mount onto the helmet and that seems to be working pretty good. It's a lot heavier and
bulkier to use but it's not sliding all over the place. It's not as annoying to deal with and
hopefully it keeps the camera lined up properly. I noticed in the last couple of videos what I took
with that it was all crooked and just it just wasn't working too good anymore so hopefully this
is better. You know I might find that it's more uncomfortable to use for extended periods of time.
I don't know. For the moment I'm pretty happy with it. It seems better. So we're going to take this down.
I might move this upstairs somewhere. It's a pretty nice fan now.
These went through the dishwasher and they are very clean. Cleaned up nicely.
Yeah, I think that this helmet camera mount is a big improvement. I try to... hard to believe I
move even slower than normal while I'm filming so that the camera is not all over the place but
I can kind of move a little quicker and it's not falling off my head so this is
this is definitely an improvement. It's an improvement as the operator. Hopefully it's an
improvement as the viewer as well and plus now we're using the the microphones the cordless
microphones not the camera's onboard audio so the audio should be significantly better as well.
So all in all this should really be a very good video setup and I hope this is
this is it really taking a good good video now.
Because quite frankly if it works better I'd be more inclined to film like this and
these types of videos do seem to get more views than a camera just sitting on the stand. Then I
can understand why it's a little more interesting and it also is a little easier for me because I
don't have to worry about trying to keep the camera in frame because you know if I'm looking
at it it's generally going to be in the frame. Why is this being stupid? I don't know why that
was being stupid but it was. I really have high hopes for this fan. I don't think I've ever been
this excited about a modern ceiling fan before. It's not going to be a you know really high
performance unit I don't think but the simple fact that it exists in a world of just hideous
ugly products. The fact that this exists and is readily available and if I want to do a dual or
triple install I can just order two or three of them. What a concept. I don't know why these
these screws are being so stupid like this. They won't come out of here.
Yeah see like right there just leaning down to pick up the screw that would have caused the
the mount to get all messed up with the other one and this time it didn't. So I really think
that this is a big improvement and I guess now if I drop a screwdriver on my head or a ceiling
fan blade falls maybe now I won't get a concussion or any further brain damage than I already have.
I don't like these screws. That is so annoying. I don't know why it's like that. It just doesn't
it won't come out. It just stops threading and then it falls. Well this ceiling fan is
otherwise fantastic so I'm not gonna get too upset about it. If that's the worst thing about it
it's still doing pretty good. Oh show it with one blade. There you go it's got one blade.
This is not my fan. I'm not going to do that to it. Not that I expect it to break but it's
irresponsible and obnoxious risk to take on somebody else's piece of equipment.
Quite frankly if I loaned somebody a fan and that person did that I would be very annoyed.
So I'm not going to do it. Those aren't screwing in very far.
All right we'll have to put these blades away. Well actually I'm not going to put
these away yet because I might install this upstairs for a while.
Yeah this this camera mount is a huge improvement at least from my perspective.
Well that's dumb. It doesn't pass through the light. Really? That's kind of annoying.
Someday I will finish setting up the electrical down here and then we'll have better lighting.
I think that we're going to switch to that box for this other fan because
it is a downrod mount so it's going to hang a bit lower.
Now I set this up intentionally so we can easily unplug this
and then we can work kind of recklessly and half the time I forget to unplug it
and then I get shocked. But this time...
Give me that back. This time I remembered to unplug it. This is a pretty good mounting system.
I like this. It's easy to work with. I still think that Hunter's low profile fans were the absolute
best but this is close behind. I'll save my wrists and use this.
No, maybe not. What the heck? Why did this just come off of there? Are all these supposed to
come off? I guess so. This is actually pretty good to use with silicone fans because it's low torque
so it's not going to strip anything out. It's also very low on charge which is not particularly
helpful. And there goes the anti-short pushing again. Before we go any further, let's plug this
20 kilowatt meter. I go from no kilowatt meters to just up the wazoo over here.
That does not have lithium batteries so there's not going to be a lithium battery fire.
I don't have to worry about that. All right, so what we're going to do is we're going to switch
over to the other box. We'll use that one. This way it kind of hangs at a reasonable height.
Unfortunately the ceiling is is pretty low down here. I mean I can
I can touch the top of it with ease. I think it's probably no more than seven feet if that.
It's very low so the ceiling fan installs down here are a bit of a challenge but that's okay.
At least it's high enough that we can use ceiling fans at all. It could could be worse. Let me get
that little step that wobbly stool. Another incandescent bulb burnt out. I'll have to change
that today. That just burnt out earlier today. That bulb is I think either the fourth or that
how much warmer it is up here than it is down at the ground level. Even on a six or seven foot
ceiling the heat is not de-stratifying. I guess I should leave a fan on all the time down here.
I can just feel all the heat up in the rafters here. There's got to be a
five or ten degree difference from up here down to here and probably 15 degree down to the floor.
That's incredible. Okay so this has all the screws in it. This needs to come out.
I can't believe this actually has polished brass hardware. This really is just like the old ones.
That's great. That's great too. I guess this is not worth using because it's not charged up.
Ever since I replaced the battery in it the switch has been a little wonky on this.
So I think I need to go in there and clean the contacts or something on the switch.
All right let's see how this goes together. The only thing that looks kind of weird is this.
What the heck is that? I still just can't believe that you can buy these still.
Yeah this is a pretty solid canopy. This is dated February 2025 model AC-342. It's made in China.
And that appears to be a legitimate UL sticker. That's surprising to me because a lot of the
stuff nowadays is only, especially the cheap stuff, is only ETL listed. But this actually
has a legitimate real UL sticker. So it's only a 0.45 amp motor. I don't know what the power
factor is. So we, oh there we go, motor rate of 55 watts. That's honestly not that bad. That's not
particularly low power. And this this fits in there pretty nice unlike the hang false or fall
through hang through canopies from some other expensive brand that we won't talk about.
It's got a safety cable which would confirm my theory that this was sold in Canada as well.
You know the finish is actually pretty decent quality on this. There's a little bit of
imperfection there but it's it's not bad. It's even got a knockout for a swear kit.
This is a cool fan. How sad that it's this exciting to find a cheap basic arguably piece
of junk fan. I'm going to have to take this off. It's going to be nearly impossible to get the
get the security cable through this with that bar in place. It's copper wire not aluminium cheap
junk. There really have been no red flags on this thing so far in terms of quality issues.
It really, everything about it seems pretty reasonable. Now granted it wasn't cheap so
it should be you know of reasonable quality but
there is just I don't know it seems like it's built to be cheap.
And of course you know everything these days is cheap junk usually so
I guess I'm just kind of expecting it to be cheap junk but maybe it's not maybe it's reasonable.
Okay so it looks like yeah this is pretty standard and even this I've actually never
seen this before where the tip of this is kind of pointed so it it will feed you know
kind of make its way through the wires better. I've never seen that before that's brilliant.
That should be standard and it did navigate its way through the wires pretty easily.
It's another win for this thing. I don't think we want that to go all the way through because it'll
easily hang this like this while we work on the wiring so the install is pretty easy.
That we're not going to hook up to anything. I'm not worried about this falling it hardly
weighs anything anyways. I don't know why that sounds like that. It's kind of weird.
the connection sit inside the canopy. This is a very short-term test down here and I'm pretty
sure that that actually is allowed. I don't think that that's an illegal move. I can't believe this
has the knockout for the swag kit. That is so cool. I don't want to speak too soon but so far
this is all lining up nicely.
So did that. I should have taken all the screws out of the motor when it was still on the table.
Wow those are in there tight. That's also the wrong size driver.
vibration isolating thingies to put on there which may or may not make any difference.
They've got a sticky side on them. That's kind of neat.
We've got to save the staples. We might put them back in someday. You never know.
All right so we've got some fiber washers, some nuts, and some bolts. Let's see what
um how does that one ring go on this. There it mentions the gaskets and it says the fiber
washers go on top with the nut. This is all very clear and well written. That instills a lot of
confidence into the product and these are nice regular bleached oak. They're not that stupid
gray whitewashed garbage that you see on a lot of fans today. This is traditional
Let's see should we do the white or the bleached oak? Let's do the bleached oak. Gives it a little
more character. I see something I don't like. This should be rounded with the blades and it's not.
Minor detail um but if I was designing this I would have made sure that like it is on this fan
it's the contour goes with the iron. See it just doesn't quite doesn't make any functional
a halfway decent product. Now if those attempts were successful or not and that we'll find out
is the useless because it's missing a piece. Okay well that can go far in a bag for now. Oh this
whole thing is all messed up now. I wish I had vintage ones of these. They would be much more
oh dear these these do have a sticky backing to them. We could peel that off and stick them on
so much force the first time. There's a lot of wires in here. This is going to be a little bit
difficult to to get shut. I think you have to move some of these connectors around in here to get
this to close. That is a huge capacitor. I don't know why that's so big. That wasn't too bad I
guess. Famous last words. It's not shut yet. Yeah that's that's really tight. Oh this is the only
part of the installation that I don't like so far is how many wires are in here and how little
it. That wasn't too bad but it's definitely a lot to cram in there. It is a tight fit still. I don't
This is pretty tight as well. So I'm definitely not liking the way this attaches.
But other than that everything is pretty good with it. Very tight. Shouldn't be that way.
All right we'll put in the stinking DEL bulb. It says nine watts LED max. That's a bunch of baloney.
That's a nice ceramic socket. You could put a 60 watts incandescent in there with no problem.
And that's likely what we will do if this gets installed upstairs.
Now this is working fine. All of a sudden it's something to do with the switch.
Perfectly reasonable globe. It's got the noise insulator on there. So it's kind of like a
grime on it. That seems to be very common I've noticed lately.
Well these just need to be washed right out of the box. But that's not a big deal.
And we got some nice polished brass chains to put on here to finish it off.
Under pretty good length too. So install wise I would give that a nine out of ten.
The only issue I had was the alignment of the screws on the switch housing.
Which is probably related to there being too many wires in there.
Or the wires being too long. Or it's just there's just too much wires in there for the size of the
switch housing. Other than that this was super easy to install. So very cool. I cannot believe
that this is something you can still buy today. That is just incredible. All right we'll tune it
in tomorrow and we'll test it out.
