Cutting holes for ceiling electrical boxes just became a lot easier and cleaner! Check out this Milwaukee Tools® variable size hole cutter with dust shield!
When it comes to drilling holes in the ceiling to install can lights, light boxes, audio speakers, or ceiling fan support boxes, it can be a messy job. Well, it’s gotten a lot cleaner and easier with the adjustable hole cutter with debris shield.
The hole saw is adjustable to cut holes ranging from 2” to 7” (approx. 5 to 18 cm) and is easy to set up and use. The adjustment is intuitive and clearly marked. Simply remove the quick-lock chuck and pilot bit from the unit, set both cutter arms to the same desired setting, and reassemble. Then put the hex-drive chuck shank through the debris shield sleeve and go to work. It’s that easy.
The tool is black-oxide finished, and the debris shield is thick enough to last for quite a while, although it is a bit bulky and could be smashed under other tools or supplies. I don’t see a way around that though.
We bought ours for about $36, but in the short time we’ve had the unit, the price has now increased. To get the current price, or to order one, visit:
Klein Tools® also offers a similar unit for right under $30 at the time of filming.
If you have a ceiling fan to mount, see this episode where we show you what boxes are correctly rated for the job, how to mount them, and the difference between new and existing construction installations: COMING SOON!
With great tools and a bit of know-how, you can JUST DO IT YOURSELF!
Hey, Dirt Farmer Jay here from DirtFarmerJay.com.
Are you getting ready to install perhaps a ceiling fan
or maybe some can lights?
Well, you gotta have this tool from Milwaukee.
Let me tell you all about it.
Hey, Dirt Farmer Jay here from DirtFarmerJay.com.
When it comes time to install a ceiling fixture,
a light fixture, a ceiling fan, or a can light,
you really should not attempt the job
without a tool like this.
This one's from Milwaukee, the adjustable hole cutter.
And what this allows you to do is adjust
to the exact hole you need to drill it
from under in the ceiling right there.
But the cool thing about this little system
is this is a guard that goes up under the drill
so that as the debris comes out of the cut,
it's not in your face.
And then there is this set right here
that it comes under as an adapter
so to keep it from coming in your eyes.
And then of course,
this adapter can be adjusted back and forth.
Let's put it to work.
We're gonna cut a four-inch hole
for this mock-up right here of a ceiling.
Now, this is upside down.
You've gotta kinda suspend reality
with me here a little bit.
Literally, this is looking towards the sky.
This is down instead of up.
Here's your ceiling.
So we're gonna drill a four-inch hole right here
to be able to put in some ceiling boxes for fans.
Okay, let's go to it.
All right, let's go ahead and set the tool up.
Now, this tool goes from two to seven inches
in quarter-inch increments,
or if you wanna say it in metric,
50.8 millimeters to 177.8 millimeters
in increments of 6.4 millimeters.
So you're gonna adjust this up and down
for whatever opening you need.
The setup is pretty straightforward.
So the first thing you're gonna do
is take this quick release like this,
remove that off of there,
take out the bit,
and then adjust this where you want it.
And what these do is they slide,
and here that's as wide open as it goes.
The markings are in imperial.
And right in there,
you're gonna see that that says seven,
which is seven inches.
In this case, we're gonna do four inches.
And so I'm gonna take this
and move it to where it says four.
There it is, four inches right there.
And now you need to make sure
that the other one on the other side
is set exactly the same.
You don't want one longer than the other.
And now the points are equidistant from the center.
Now let's go ahead and insert the pilot bit,
which goes in the same direction as the cutters.
Right there like this.
Go ahead and insert the quick chuck like that.
Now the whole unit holds together
and we're set to four inches.
And the next thing you're gonna do
is you're gonna snap this in
and you can see where it lines up.
You just push that in until it pops in in place.
And now that's secure.
You're gonna take this bit and drop it through there,
rotate it till the hexes line up and it drops in place.
Now you're ready to go.
And up against the ceiling,
that would capture all the debris.
We're doing this upside down for our demonstration.
We're just gonna choose approximately in the middle
of where this panel is between these joists.
Let's go ahead and drill that.
Now, if this is upside down, of course,
all that dust would have dropped in here.
The plug would have dropped in this as well
and we'd walk away.
Well, we think that's a pretty doggone good investment
for about 35 bucks available readily
at your local hardware store or online.
And because it's adjustable,
it allows you to do lots of different jobs
and keep all of that debris out of your face.
So if you found this video to be helpful,
why don't you like it and better yet, subscribe.
And when you do, ring the bell
and that way you'll be notified approximately every Saturday
another great video about the home, the garden,
the kitchen, the shop, or just great tool reviews.
Things that'll help you just do it yourself.
Here's another thing you may wanna know
and that's how to install these kind of boxes
in the ceiling securely so they can take the weight
properly of a fan along with the vibration of that.
Something you'll never have problems with.
Check out this video where we give you several techniques
to accomplish this task so it's safe and secure
and lasts you forever.
And then check out this other video
that YouTube and we think is perfect for you.
Until the next time, this is Dirt Farmer Jay
from DirtFarmerJay.com.