How to Replace Toilet Fill Valve Made Easy/Part 13

VideoJoeKnows
61 followers
508 Video Views·Jun 11, 2026
How to replace toilet fill valve made easy Part 13 is what this DIY howto video is about. VideoJoe is almost done with installing a Fluidmaster toilet fill valve & he wants to show you what he will still be doing before he calls this Fluidmaster toilet fill valve replacement install complete. Watch & learn as VideoJoeShows you what VideoKnows...how to replace toilet fill valve made easy Part 13. Nice!
AI Generated·May contain errors
So now at this point, I'm going to clean up everything. I'm going to wipe down
the floor. I'm going to wipe down the toilet lid, the bowl inside. I've got my, I'm going to rinse
my sponge out, my sponge out right there. I'm going to take my simple grain. I'm going to
spray it down. Okay, I'm going to take that, spray it down. I'm going to get some clean water.
That's clean. I could use that. I fill that up and, and I'm going to put everything back
together. Oh, look at the toilet paper. The toilet paper holder is, it's just a little duck.
Okay. I took the, I took the toilet paper out. I took everything out away from the toilet.
So I kind of set it to where it was before. And I'm going to put that, that all back together
and wipe it all down. Your job is not done until you clean up. I want this to look
like I was never there. Okay. Okay. I got everything back together. I've got to put
the toilet paper roll back on there. I got it all cleaned up, all sprayed down with simple
grain, wiped it all down, wiped down the inside of the bowl and all that kind of stuff. You want
to make this look like you were never, like you were never there. Okay. And give you a chance to
check, make sure the lever handles tight. Make sure your toilet seat is, is, is tight. If you
need to adjust it, pull up on these caps, realign this, tighten it back down. If you need to do
that. Now I'm going to throw a monkey wrench into everything. Okay. Everything that I've said so
far, when I looked on the directions, I was racking my brain like, okay, what's going on here
and see, they, they talked about replace fill valve seal right there. Well, this one didn't
have a seal, did it? And this says replace seal with a genuine Fluidmaster 242 seal. So that seal
is different than this other seal. And this seal was for the older style and it was for the 400,
200 and 747 models. And the one I had was a 400 model, but today's 400 is different
than years ago, 400. And it's slightly different than the, even these directions, because it says
there's a seal right in there when you take the cap off. Well, in my instance, you saw when I
took that cap off, there was nothing attached to the cap and there was nothing below the cap on,
on top. And so I think they've even remodified it, but yet on their direction book, they didn't
remodify the direction book. See, this is for a 400A fill valve, but yet the one we just put in
did not have this whole seal there and it still snapped on there. And I flushed it a couple of
times and everything seems to be working fine. And that was not there. Okay. And so if yours
has this, then you have to get a 242 seal. And I guess you can get those at the hardware store,
but in our case, we didn't have to do, we didn't have to do anything with, with this seal. We
didn't even see the seal on there. So, you know, different things to think about when you're
replacing the toilet fill valve, especially the Fluidmaster, your old style Fluidmaster,
you've got that seal in there and, and I showed you how to take that off on the old style that
I took off, right? And so you can replace that, or you can clean out the existing one to see
if you can fix it that way, if it's leaking or if it's not shutting off. And if you don't have
that style and you've got this style, you've got to get the 242 Fluidmaster 242 seal. Okay.
But in our case, we didn't have a seal at all. I did not see any seal at all whatsoever.
And it looked like after I took that cap off, I looked at it, looked like all the other parts
were all fixed on the top and nothing else could come out. So I think they've remodified even
the new Fluidmasters from this direction booklet. Okay. If you got any questions,
of course, on this whole book, it gives you the install directions. And it also gives you
an area in the middle of the book for troubleshooting. Okay. And it also gives you
a little how to video. Look at that right there. You can look at that.
If you don't want to watch any more of my videos, you don't have to, you can just,
you can just watch that. But I hope you watch more of my videos because I'm going to show you
all kinds of stuff on how to fix things around your house. Okay. And here's one more thing.
Remember I told you they got the direction book and to read the direction book. I did not read
the direction book. Did I? Because I thought for sure I knew everything on how to do everything.
And when, when you look at this, it'll, it'll tell you, it'll show you all the directions.
And it said for those nuts, this one here, it says, it's, it, it said,
not, not to tighten it up too tight. Not to over tighten it because there's a certain,
there's a certain thing on there where they caution you do not over tighten. Okay. Install
lock nut. Hand tighten only. Do not over tighten. Okay. They tell you on the one that, that
attaches this to the toilet tank. And then they also say for the, for the, the valve,
one that comes from the valve. Okay. Here, attach water supply connector to fill valve.
Hand tighten only. Do not over tighten for that one. And then the one for this,
do not over tighten. Okay. So I'm glad I didn't tighten those up with my pliers,
but you can always check it 15 minutes after the time, look down there with, with a little piece
of toilet paper or something like that on the floor or, or put your hand down there and make
sure that you got it as tight as you think, because if it's, if it's dripping, guess what?
You, you haven't gotten it tight enough yet. Okay. So there's a few more tips for you.
Ready for the next customer. Well, I'm glad that's done. Well, that's all I got for this time,
but I'll be back with more videos.
