http://www.VideoJoeKnows.com How to remove loose & puckered drywall tape is easy...when you know how. Why is your drywall tape loose or puckering or cracked? More than likely it may be caused by recently water damage underneath the drywall causing the tape under the drywall tape to loosen thereby causing the drywall tape to curl, peel, crack, or pucker. The drywall tape will now have to be removed prior to applying any drywall joint compound as any new joint compound will not make the loose drywall tape stick again. Removing the existing damaged & puckering tape is a must. Once you remove the drywall tape from the wall or ceiling, you will then be able to tell how much more of the existing drywall joint compound is loose. Hey that's what this instructional video is about! http://www.VideoJoeKnows.com
I thought I was all done with the sheetrock patching. I forgot about this over here.
Remember, there's water damage here, and there's a crack here, and I believe this crack
is right on a tape line. I'm going to take my sheetrock knife and just cut out a little bit
and see about it first. I'm hoping I don't have to actually cut the sheetrock out
like I did the other one. Okay, I don't think it's it's damaged it as much. I think it's just
the tape. I see this tape goes across both directions, and sure enough, that was the tape.
So I can score this, and I see that it's cracked about here.
I'm just gonna go across this, and I don't have to have it perfect or anything,
and I also see how it comes all the way out here. This is scoring the paper tape underneath
the mud. Like I said, I don't have to get it perfect. It's not perfect by any means.
It's going to be all covered up anyways, and I first just want to get this tape out of here.
See, that part came out pretty good, and it's getting hard, and so I may not have to take it
out all the way that direction. Here's the sheetrock nails. See, that's the mud that
went over the tape, and that's all loose. I wanted to take off anything that's loose,
and I'm just using a cheapo three-inch putty knife I got at the store, not an expensive one,
three bucks, three dollars, I think it was. So first, I'm just going to kind of get anything
that's loose. I don't want to just put mud up here and tape self-adhesive tape.
I got to make sure that's going to stick, don't I? I also want to make sure I don't see any mold
residue underneath here because this is kind of discolored, and I'm hoping there's no mold under
here, and so far it looks like I'm all right. Now see, I thought this tape was going to come
off there, but it's already cracked there, so this one I'm going to cut on the inside
and just try to peel that out of there.
You see, that was loose, or else I wouldn't be able to just see there. I wouldn't be able to do
that would I, and it's okay if I got the marks there. I'm going to end up putting tape over this
again. You can't really mess up when you get going, okay, and now because I have this, I'm
going to I'm going to see if I can get some of this because remember before I couldn't get it
over there. I start from the middle and work that way. I get more of it off. I don't want to take
off any more than I have to reposition my ladder. Look at that. That just came right off. Okay,
so I'm going to keep working on this and get all the loose stuff off, and I'll be right back.
I got all the loose bits off. I checked it pretty good. This is a brand new blade. It's pretty
flexible, nice and sharp. If I can't get any more than that off, I know I'm good. Okay, so now where
the tape is, I'm just going to take my sheetrock knife, and I'm just going to clean up the edge a
little bit by scoring it just a hair. I'm trying to get off some of the high bit there on the edge.
Okay, that way it gets something for my mud to kind of sink into. I'm still going to have the
webbing tape on there too. Okay, see where that is right there. Okay, I don't know if you can see.
I'm just going to kind of cut the edge off the tape because that tape's on there pretty tight now.
Okay, I want to get some of that off. If you got any of that tape that's sticking up,
now your patch material is going to have more mud on here, and you're going to have to float
it out further. So I'm trying to just check around the edges, and any tape that's pulled
up a little bit, I'm going to try to trim that off. Okay, all right, that's your first
step. The good thing about this, there wasn't much water that was above here because the main
water leak was down over that way there, and I don't see any mold up here at all,
any fungus growing, anything like that. If you've got any questions about that, if you see
little spots, and if it's just on the surface, let's say you could spray some Clorox up there.
Did you know that Clorox will kill most of that stuff, and at least that'll give you
a little bit of protection there. It's not an end-all, but if you got just a little bit on there,
it'll do the trick.