Floating out a drywall "patch"

VideoJoeKnows
63 followers
20 Video Views·Jun 2, 2026
http://www.VideoJoeKnows.com Floating out a drywall patch.....is easy.....when you know how. Using the right materials, for floating out your patch, is a must.......if you want your drywall "patch" to turn out like a pro. Floating out drywall patches is a good thing to do before re-painting your walls. Watch "joe" as he floats out a drywall repair patch. Floating out a drywall patch....can you do "it"?.....of course you can!
http://www.VideoJoeKnows.com
Now that we've got this dry, I'm just going to lighten the wipe on it, make sure there's no edges on there.
Now I've got some regular sheetrock mud here, I'm going to start putting some on with a 6-inch.
Coat over the entire area, get that mud on there.
Now I'm going to use a 10-inch knife.
After I get this on there, you can put this on with a 10-inch knife too, I'm just showing you a couple different ways.
The key is to get enough mud on there to do a good job.
Now I've got my 10-inch knife, I'm just going to wipe that off.
I'm going to keep pressure on the right-hand side up against the wall as I pull.
Now I'll keep this tight and let the left-hand side float just a little bit right over my patch.
When I go over here, I'm going to put more pressure to the left-hand side.
And let the right-hand side float.
You'll get the hang of it.
If I want it to cover my whole patch, I try to just grab it on the tip.
I still want to wipe off the edges like that as I put it on.
Grab a little more, wipe off those edges.
And I'm making the patch bigger as you can see.
And then through the middle, I've just got a light touch straight down.
You can come back and wipe it down again.
I'm keeping the right-hand side tight and the left-hand side tight.
There you go.
Once that patch dries, we can sand it and prime it and paint it.
If you have spray texture that you have to do, then you have to install some spray texture.
On this video, I'm not showing you how to install any spray texture.
We're going to act as though this was a smooth wall.
And then your patch would be ready to prime and paint after you lightly sand it once it's dry.
Okay, that's all you've got to do.
