Repairing Drywall: Touching up a Drywall Repair

VideoJoeKnows
63 followers
2 Video Views·Jun 6, 2026
http://www.VideoJoeKnows.com Touching up a drywall repair "could be" an important step before sanding your drywall repair. What do I mean by "touching up" a drywall repair? Watch "joe" as he touches up a drywall repair. Touching up a drywall repair will finish off your drywall repair "patch". See.......you "can" repair drywall. You can do it.....one step at a time.
http://www.VideoJoeKnows.com
AI Generated·May contain errors
Testing. 1, 2, 3, 4, 5, 6, 7, 8.
That's enough.
Okay.
Okay, here's that last coat of sheetrock mud that we installed.
The material, I've let it dry.
And now, there's just some imperfections in here.
This ceiling is a smooth finish ceiling.
There's no spray texture on it or skip trowel, anything like that.
It's going to be smooth.
And so, I want to make sure I do a really good job here.
I'm just going to look around the edges.
If I see anything that needs to be knocked down or wiped off before I touch this up,
I'm going to do that first.
There's little marks here and there.
Check on the surrounding area because sometimes you get little drips around.
I'm just going to look at areas.
Look at it and make sure that it's dry.
It's not dry all the way.
Do a little test spot and then just kind of wipe it down.
And what I'm going to end up doing after that,
I'm going to take a little bit more sheetrock mud and any little imperfection I can see.
Now, granted, on the camera, you probably don't see the imperfections as much as I do.
I'm underneath the light.
I can see the imperfections.
It's always nice to work under a light.
That way, you can kind of check your area out.
It kind of helps the sheetrock mud to dry.
We're in an area that it's dry.
I've been off it, I don't know, 45 minutes to an hour, maybe more.
But in some areas, you might want to put a fan on it, a box fan, something like that, in the room.
Turn your heater on, something.
If it's still kind of damp, you may have to wait until the next day to do this.
Don't do it too soon.
The trick is you want it nice and dry, okay?
So now I've mixed up a little bit more mud.
And I'm just going to look, check out the imperfections as I go.
And I'm going to put a little bit more of this on in the places where I think it needs it.
And the rest of the mud around the adjoining areas are dry.
So I'm just going to bridge across those areas where I see a little spot.
I don't necessarily have to do the whole thing.
But I'm just going to kind of do a tight scan, a check, if it were, in certain areas.
And I'm going to do that.
I'm going to go around the edges a little bit, too.
Just check and make sure your edges are all blended in nicely all the way around your patch.
Okay?
So take a once-over look on it.
Add where you think.
Let it dry after that.
And then we're going to sand it.
And you do the same thing to all your other patches.
One patch, two patch, three patch, whatever you've got.
Okay?
Then you let this dry.
You've got to let it dry overnight.
Let it dry all the way.
And then we're going to sand out any imperfections that we see.
Okay?
Thanks for joining us.
Okay, here's our patch.
You can't really see it because it turned out really nice.
I'm really pleased with how it turned out.
But the patch area is right in here.
But even though you can't see it, I'm going to tell you the types of things that I'm going to do now.
I see small little imperfections.
So I'm going to take my 6-inch knife.
And I'm just going to kind of wipe off some of the imperfections.
Because what we're going to do at this stage is we're going to do some light sanding.
Before we do the light sanding, I can see just little areas that I'm going to knock off.
That way I don't have to use a sanding pad very much.
I don't want to sand off too much.
I'm just going to wipe it down a little bit.
And at this stage, too, if you're not 100% happy with your patch, you can always do a skin layer.
It's called a tight skim.
I kind of did that on mine.
But if you're not happy with it, you can take a tight skim.
Take the same material that we used for the finish coat, the compound, the wet compound on the last patching that we did.
And just take a light tight skim coat on it.
What you're going to do is you're going to put some mud on there.
You're just going to lightly pull on it and just skin over the entire area.
I'm not going to do it right now because we're ready.
But I'm just showing you by how I'm holding this.
As you're putting it up there, you just kind of want to hold it loose and pull it over nice and gently over the entire area.
Then you let that dry.
When it dries, it's going to be almost, well, a light off-white paint color.
It's going to be a light white color.
And you'll be able to know because you don't want to paint over it until it's all the way dry, especially when we sand.
You don't want to get into the back coat.
So we let this dry overnight.
It looks all nice and dry.
And we're ready to do some sanding.
But just a couple other things.
Like when you're doing the outside on your last coat, when you're doing the outside, you want to hold your finger on the outside edge.
You want to put more tension on the outside edge as you're going.
You don't want to do the same.
You'll get the knack of it.
So on the outside edge, you want to put your finger kind of over here.
And you're putting more pressure on the outside of your knife.
And kind of let the inside kind of float just a little bit as you're going around.
Just a slight tip.
I'm just showing you now is all for the last coat.
Watch this entire video, by the way, before you start your project.
Very important.
Okay, so now I do that on all of my patches.
I've got three little patches here.
I'm going to wipe them down first.
And then I'm going to show you what I do to sand the patches.
So I'll be right back.
