How to Position Wall Mounted TV to Wall

VideoJoeShows
86 followers
7 Video Views·Apr 22, 2026
https://www.youtube.com/user/VideoJoeShows
Day two of VideoJoe's wall mounted tv project & now he will show you what he does before actually mounting the tv wall bracket to the wall. You want to get the wall bracket located at the right height don't you? VideoJoe will actually be reading the directions too since that is a vital step to his project. Watch & learn as VideoJoeShows you the next step in his wall mounted tv install project.
https://www.youtube.com/user/VideoJoeShows
It's day two of the project. I made my material list the other day. I figured out everything. I
pulled the TV out of the box and I kind of looked at that. I kind of got my bearings
on understanding how it goes in. And then I went to the store and got all my materials. So now
I'm ready to show you how it's done. Before we do anything, we've got to figure out where we
want the center of the TV. And then we got to go back from there. So I made a determination
and I measured off that wall and I figured out exactly what I wanted. And I wanted like 75 inches
coming off this wall. So I'm going to do, I'm just going to put my bolt right here on the carpet.
I'm not going to mark the carpet or the wall or anything like that. Okay. I got that right
about there. That's, that's where I wanted the center of the TV. But before I do anything,
I got to look on the back of the TV, figure out how the bracket goes and all that and, uh, work
myself back from there. Okay. Step-by-step, you can do this. What you got to do is just going to
set the TV down here. Be real careful with it because you don't want to scratch your mark up
the face of it or anything like that. And I got out the mounting bracket assembly directions,
but you just kind of have to kind of read that and see what you're going to do.
Each TV has different ones. So don't be too concerned about this one. Your bracket assembly
might be different, but you just have to go through the same steps, figure out what,
what base goes on here and all that figure out, you know, once you have the TV flat,
main thing you want to do is make sure you remember what's the top of the TV and what's
the bottom. So you don't get mixed up backwards and start measuring from the, from the top,
thinking it's the bottom and vice versa. Cause that's going to be really important to figure
out. Cause you remember on this TV, we want about five feet. And actually I decided five feet,
two inches to the bottom edge of the TV. Once we get it installed, well, this is how we're
going to have to do it. We got to figure out the backside, how, how that's all going to fit
and all that. And I've already taken out the backing plate and I put that on, this is the
backing plate here. And I looked at the directions, make sure you get it up, right side up and all
that. And, uh, you have to, here's, here's my arm piece and I had to figure out how that's
going to slide on here and all of that before I can get my measurements, you know? So I looked
at that before and kind of slid that on there. You have to, when you do that, you got to kind
of hold this up and make sure. Cause at first I thought that might be wrong. And when I lifted it,
pulled it, you know, it's fine. And so I know this bracket assembly is the center of the TV.
And when this arm goes over and gets bolted up to the wall, this piece here is going to be the
piece that's bolted right up against the wall. Okay. So I've got to remember, I wanted the
middle. So I had the bolt marked on the floor, but then I had to measure over from the center of that
bracket to the center of this bracket so that that will tell me exactly what I need. Okay.
So I measured over about three and three quarters of an inch because this is the actual piece that's
going to be bolted up to the wall. You see, once it goes up like that, this has to be bolted up
to the wall. And the thing is, you can't just bolt that right to the sheet rock wall. We've
got to find the studs, right? And I'll show you how to figure that out. Okay. So we know three
and three quarters over. All right. So now we'll go back down to the carpet, show you what we do
next. Just so you know, I mean, each TV bracket assembly is different. You've got to get the
bracket assembly directions out. This one had two different bracket assemblies to put back here
because it's modified to accept pretty much any TV. The whole pattern may not be the same
for your TV. So you may not need this bracket. You may have a different bracket, but they're
pretty much universal. Okay. So I don't want you to think this was just something I kind of
threw together because I did a little bit of planning on this and I kind of pulled out everything
and I've not installed, I have not installed this type of bracket assembly before. That's why I'm
going and reading the directions like I should. Don't think you can figure it out without going
through the directions. Okay. And that way I can see where everything's at and all that. Okay.
You can do it.
