How to Repair Paint Grade Door Bottom Edge Part...13

VideoJoeShows
86 followers
4 Video Views·Apr 20, 2026
https://www.youtube.com/user/VideoJoeShows
How to repair a paint grade door bottom edge...Part 13 is what this howto video is about. VideoJoe will be using some more heavy duty liquid nails & applying on his repair patch area at the bottom edges of his paint grade door. Watch & learn as VideoJoeShows you the next step to his project...Part 13 Hope this helps with your project repair & may give you some ideas on what you could do in order to repair your door.
https://www.youtube.com/user/VideoJoeShows
Here's my liquid nails I used the other day. Now here's a tip for you too. When you get done
using your liquid nails it you know your your tip is always full of the remaining liquid nails. What
I usually do is I'll squirt out a little extra and create a little knob on there and then the next
time I use it I can grab that and usually it'll pull out a little bit inside then you know you
may have to clean that or whatever but that's what I tried to do on this time here didn't
really work too well this time only because that knob was only on there for a couple days you know
and and sometimes you know I can do this to clean it a little bit but if this whole thing is hard
you may have to cut this tip you have to cut the tip back further and dig some of this out to get
to it that's the only thing I wish they would really figure out how to make that better so that
you know two months from now you can still use the tube with the tip on here maybe unscrewing the tip
or something you know something like that you could clean that out or something be ready for
the next go I don't know it's just a thought I had all right I'm ready to use that now making a
little mess aren't I I didn't have any craft paper with me today at least I got a vacuum always make
sure you clean up after yourself before I use this I always like to squirt a little bit out make sure
that everything's going nice so I don't get a hard little goody into my work surface you know
okay I think I'm ready and these tubes sometimes I've got the pressure undone at the bottom end of
my caulk gun but sometimes it still wants to bleed so always have something ready a cloth
and napkin paper towel whatever because you may look one second and set it down and then you you
come back afterwards you know a couple minutes later and this is all dripped down onto your
carpet or your tile floor your linoleum or your countertop wherever so be careful with that and
I know they have some caulk guns that shouldn't do that now when you press the button it stops
but usually what you're gonna find on most caulk tubes of mastic such as liquid nails when you
first open it it's under pressure you know you're gonna have a lot there and so some of it's gonna
bleed when this tube and this is a brand new tube I've hardly used any okay but once you get down
three-quarters halfway whatever you're less likely to do that so always be aware of that when you're
using a brand new tube all right let's see what we're gonna do here just gonna put on a little
bit this is gonna kind of bond that top surface to see and now I can I can just use my putty knife
uh-oh last time I used my putty knife I used it with the liquid nails I got it on my putty knife
so I got it man I should have checked that first because I want to I want a sharp clean edge I
gotta make that smooth shoot I got a couple minutes before that liquid nails skins over
wasn't ready my loss is your game always make sure something like this you're ready let's get
put my I put my putty knife away before the liquid nails was dry on there and I couldn't clean it off
it's easier to clean off your putty knife after your liquid nails rise on it okay so that's what
happened with that okay now now I can just all I'm gonna do I'm gonna have to decide when I'm
gonna stop on this you know here I see I can just go right over it like that because I've got the
masking tape there I think I got to put on a little bit more that was too much but I can wipe it off
not too concerned where that masking tape was okay that's there if I don't have a clean edge
to go on it leaves a groove just have to be careful with that I got to clean off my putty knife edge
just a hair yeah yeah putty knife wasn't ready it's trying to do it too quick you know you're
working with just a little bit it skips over yeah I have to clean my off my putty knife be right back
