How to Connect Water Supply Line to Bathroom or Kitchen Sink Faucet

VideoJoeShows
86 followers
69 Video Views·Apr 20, 2026
https://www.youtube.com/user/VideoJoeShows
How to connect a water supply line to a sink is what this howto video is about. It's not hard to install & attach a water supply line to either a kitchen sink, bathroom sink, whatever kind of sink you have....when you know how. Watch & learn as VideoJoeShows you how to attach & connect a water supply line hose to a sink.
https://www.youtube.com/user/VideoJoeShows
See then I would I would take that nut off that top nut remember
Take that off
Take that little coupling that ferrule I call it
And do you need those? No
Because this has kind of like a little ferrule attached in there
And then you would hold this up in there and screw that on
You know
this braided
Line going up to the sink. That's the best stuff to use
Now the one before you remember it was white. I
Could have reused that and I could probably get that nut off
You know loosen it up from there now
Screw that on there. I
Could probably do that
but once I go ahead and replace
The sink faucet, I'm gonna put new lines on here and the braided lines
And this is a plastic kind of braided line and that's better
Than what they used before but this is even better than that
This is a steel braided line on the outside
and
It doesn't cost much more than this
this nylon
Type okay, so if you're at the store if you've got
You got options. Yeah
Get this one here
Only cost maybe a dollar more. So it's not very much well worth it
The long run because if these are cheaper, there's got to be a reason why they're cheaper and you know what they say if it's cheap
Not gonna last this long
Now if you are gonna put that back up
Don't forget to put your
Teflon tape on there
It's gonna be kind of difficult to put it on now. I almost should have put it on first, huh?
the next valve I do I
Guess I better remember that
But you can do it now. It's possible
See, I told you it was possible
one little trick I
There's a little screw on this valve head. I took that off
Pop the head off and then I was able to wrap that around easier
Then I put it back on the very same way
Okay
Now we're ready to hook it back up
to the water faucet on the sink
One thing you just want to be careful of is
These threads are pretty fine, you know, and now that you got the
the
Teflon tape on there
Just want to make sure you
Get that held up there and you make sure that you're screwing it in properly
You know what? I mean? It's not going don't force it and you should be able to tighten it up with your fingers
quite a ways
You know
It's not going just kind of move this around a little bit. I think I'm gonna have to reposition myself
There we go
Okay
You can't tighten it that much with your fingers
Then you don't have it on the threads right and see you can you can move this around a little bit see that that kind
Of concerns me too. That's a little wobbly
wibbly-wobbly
Wow
Really shouldn't be like that. I
Think it'll still hold we'll see
Okay, now I can tighten that up with my wrench I
Guess I should have just left this off. You need a little Phillips
screwdriver to get that off
Then this just pops
right off
Make sure you put it on the same way and there's little notches in there
Because you don't want it over here like that or something. I think it's only gonna fit one way though
Okay. Now you can reach that better tighten that up
Now you want to tighten that up so tight
You know, I gave it a couple turns. I want to do that too much more
I'll turn the water on to make sure it doesn't leak the drips ever so little I might tighten that up a little bit more
But that but see eventually in the near future. I'm gonna go ahead and replace that
This line for a braided line
Here's a braided line
This will last much longer and it's like a maintenance upgrade
Doing some maintenance on here. I don't really like these nylon ones. These look fairly old
plus it's kind of you know, I don't know it's probably okay, but
Because I'm doing all kinds of other work underneath this sink. I'm gonna put some braided lines, but I'll do that later
Okay, but for right now, I don't want to tighten this nut so tight that I'm gonna have a problem getting it off
Next time to put this on, right?
This valve wasn't right up against the wall. I might be able to get in there
Without taking this little end piece off
I'm gonna like these little gate valves a
lot different than the other ones
See you turn it that much and that's all you got to do
Ready to turn the water back on
Got the water back on. I
Think that valve is off right there. I've got the
Faucet the hot water
Handle up and I think this is on
See that's it on straight up and down off
That much a quarter turn you don't have to turn it and turn it and turn it every time you turn something
Especially on an old faucet a gate valve. You got a possibility of it leaking
Dripping around the rod or
The end breaking off and this is a nice metal one
This is a good one to get if you got a chance
You look in the hardware store and you got something like that you can get
Do it
