How to Apply 2nd Coat of Quickset to Wall Patch

VideoJoeShows
86 followers
Apr 18, 2026
https://www.youtube.com/user/VideoJoeShows
How to apply a 2nd coat of quickset to a wall patch is what this howto video is about. VideoJoe has already installed a first coat of quickset over a drywall patch & now he is ready to install & apply a 2nd coat of quickset over the same drywall patch. Applying a 2nd coat of quickset will make your drywall patch turn out that much better & faster too since this 2nd coat won't shrink like regular drywall mud which means you can install this 2nd coat on the very same day. Watch & learn as VideoJoeShows you how to apply a 2nd coat of quickset to a drywall patch.
https://www.youtube.com/user/VideoJoeShows
I smoothed out all around the edges as it was drying or just as it was dry and if you wait
until it dries all the way you can take your putty knife and kind of scrape off any little
bits of high areas. I'm just going to put a little second coat over this now and this will this will
start making it a lot smoother. Got to get that first coat on there and then put more on it.
That's why I say don't be too concerned when you get the first coat on there if it doesn't
get perfectly smooth. Okay that's looking way better. See I'm doing all this on the same day
and I'm going to let this dry and then I'm going to put some all-purpose mud on there
before I leave for the day. Then tomorrow I'll sand the all-purpose and see if there's any
little areas I need to tight skim and then that's ready to be painted. See there way better than
that electrical plug huh. Here's something important that I want you to understand about
using Kwikset over a patch like this. Once the Kwikset dries I've got two coats on there and
it's dry now that almost acts as a metal plate over this webbing tape. Once that Kwikset bonds
on the back side of that webbing tape and on the front side of the webbing tape it gets really
super hard way harder than regular sheetrock mud so that's almost like a plate going over that.
That is solid now if I hit that with a hammer obviously I'm going to crack it I'm going to
crack no matter what's on over that hole okay but you're not going to ever do that so that's why I
like to use Kwikset another reason but you know I also like to use Kwikset because
it dries so much quicker than regular sheetrock mud and I can put all my coats on
in one day and have that nice and hard before I put the finished
all-purpose sheetrock mud over that. Try that next time you do a patch like that.
Incidentally I just wanted to share something with you remember I was saying
why would somebody put a plug that close to an opening now here's the opening I got plastic over
and this opening used to not be here there used to be an accordion door on this opening but before
that this wall kind of went all the way across it might have had a door opening in it once upon a
time but then they decided to cut this big huge opening in the wall and they went right over to
an existing stud and on that existing stud to the right side of it was that plug and they didn't
bother moving that plug they could have they could have moved it over done away with it whatever
because I know they did some sheetrock work in here too they decided just to leave that
and that's why that was there so next time you get ready to cut in an opening such as this
and you've got some existing plugs in the wall you know take it out and do it right relocate it over
right there or if you're not going to do that at least patch that up
like we're doing now so much better to do it like that
