How to Install Dishwasher Water Flow Solenoid Switch...Part 2

VideoJoeShows
86 followers
14 Video Views·Apr 17, 2026
https://www.youtube.com/user/VideoJoeShows
How to install a new dishwasher water flow solenoid switch...Part 2 is what this howto video is about. VideoJoe is right in the middle of installing a new water flow solenoid switch to a dishwasher & it looks like it's going pretty smoothly. Has VideoJoe ever installed a water flow solenoid switch to a dishwasher before? Ah that would be a no...….but you'd never know it. It looks like he's taking his time with this water flow solenoid switch install & making sure he feels comfortable with each new step to the howto project. Watch & learn as VideoJoeShows you how he goes about installing a new dishwasher water flow solenoid switch valve...Part 2
https://www.youtube.com/user/VideoJoeShows
I always carry Teflon tape in my nail bag or somewhere close so I have some.
Okay, I hope I have enough. If I don't I may have to go back to my place and pick some more up.
Here's that tape. I've showed you on other videos how to how to put Teflon tape on.
Okay, but you want to put it on and kind of hang on to it.
You want to go the same direction that you're going to screw it in.
Okay, so when I pull it off that same piece is going to tighten up in the fitting. Okay,
you do it the very opposite as you're tightening it. As you're tightening the fitting
into the other end you're actually loosening up the Teflon tape. Does that make sense?
You don't want to do that. See, I don't want to get it over that edge either. So I'm just
going to go from that top edge on down. I'm keeping pressure on here as I go. I'm putting
a few spins on here. You never know how much to put on. I just put on three or four spins,
whatever I feel like. Because see, if you get too much in there it might not fit on your threads.
The last thing you want is only to put on hardly any and then you're not really getting a good
connection are you? Okay, I got enough on there. Pull that off like that and just keep pushing
that on there. Okay, that's all ready to be put in. Before I do that, I mean actually I guess I
could do it now. I probably should because I don't want to mess up these. I'll screw that on there
and then I'll hold this whole thing and do this one. Because if I do it now, it might get loose
on there when I'm trying to tighten this up. It'll probably be fine but that's just what we're going
to do. Okay, so now I get to screw that in and see if it fits. Pretty sure it will. Okay, get this
and put it in there. Okay, good. Remember, we want it facing out. So when I put that in there,
this is facing back that way straight. If I can, I don't want to put my pliers on too far and start
turning because see then that's going to get up into these threads, right? So I've got to do it
down here low enough down here but I still have to be careful what I'm doing. I don't want that to
slip and get up there because then that could cause a leak. Boy, that's starting to get tight now.
I'm wondering if I can get it around again. Geez. All right, last thing I want to do is put it so
tight that I crack out this plastic here. You know, that's the one thing about these.
Okay, I guess it'll go further. I'm going to work on this and see I've got to turn it
almost two-thirds more. Just going to have to work on it here. Be careful as you go.
Last thing you want is to try to do it so tight that you're wedging on this plastic over here.
You don't want to break that plastic off. Okay, and see that fitting is kind of in there so I
don't think even if we unscrew those, you know, that wouldn't be good either. Just have to keep
doing it right from here. Okay, it's going to go a little further here.
Geez, easier to do it now than underneath there, right? Okay, there. I want to stop.
I'm going to stop. That looks pretty good. Now see, worst case scenario, if that ever leaks,
I don't think it's going to, but if it ever stops dripping, I'm going to have to reach down there
and tighten this up a little bit more. As long, since I got it straight, I have to tighten it,
you know, an eighth of a turn. This pipe, this water line under here is going to turn a little
bit and I'll still be fine. You see, the last thing I wanted is to tighten that over way over
off to the left thinking, oh man, that's barely going to fit there. Then what happens if I have
to tighten it more? I'm going to start tweaking this and bending this all the way around. That
might not be such a good thing either. Okay, so I'm about ready to put that in, but I think I want
to put Teflon tape on this one here first. Easier to do it now. Then I'll just have to be kind of
careful with it, right? All right, remember how we're going to do that? You just want to think
about it, which way you're going to put the Teflon tape on. Think about it, you know. Sometimes
kind of gets me all messed up. Like first, I'm going to put it on here. Kind of tricky.
I got it down here on the ground. Okay, so I hold it there. I look at that and I imagine
breaking it off and yep, it's going the right direction. Okay, so see right here, I'm just
going to have to kind of, how am I going to do that? I just want to rattle this all around because
I want to keep it as flat as I can. That, keep pulling tight on there and I think I'm going to
just peel this back a little bit and cut it off. I can kind of fit that on there easier, see?
I want to try to keep that tight going. I don't want to stretch it so much that I'm going to
pull it apart as I'm wrapping it, you know? I think I can use this whole bit here.
That's giving me a few spins. I'll be good with that, okay? Nice and clean using Teflon tape.
I guess the next thing I want to do is hook this black pipe up here because I don't have
very much slop with that, right? I'm going to hook this, this one up here last and I hold that up
there. It's going to go on to the back. Before it was kind of at an angle, remember? The other one
was kind of coming out at an angle so I've got to come straight into the back. I wish this was
longer. I don't know why they got it so short. I'm just going to reach up in there and see if I
can pull any of that down and I don't want to pull too much because I'm not sure. The last thing I
want to do is jerk that down and have a leak on the side there or something. If I really wanted
to, I could pull the dishwasher out a little bit but, you know, it seems like I've moved it just a
little bit. Okay, so this one's going to be kind of tricky. I'm going to have to get down here and
reach on it but at least I can get it on here. I've got to get it kind of on there straight
too. When I get it then I'm going to have to swivel it up or actually swivel it down
that way. So I want that clamp on there the right way because I don't want that
kink too much one way or another, you know? Usually what I do is I'll wet the inside of that
and there's a little bit of wetness. I might spit in there or get this wet here,
this plastic. You do that, it'll slip on easier. Okay, all right, that's the next step. You can do it.
I know you can. I thought it was going to be harder than it was but it slipped right in there.
Make sure, remember I have that little spring-loaded clamp off. You have to slide that
kind of back on the black pipe then put the pipe on here first then pinch that and slide that up
and over. Okay, and I've got that. Make sure you do that because if you forget to do that you might get
a leak there later on. All right, so now before I clamp, before I screw this back up here I'm going
to hook up the little electrical wires. Okay, let's do that next. That way I can reach them.
It'll be a little bit easier.
