887. Installing Hsin Tools Handles for MKM HR/BHR/LHR rollers with Hsin-Chuen Lin 林新春 木桿滾花紋手把設置示範

Hsinchuen Lin
205 followers
148 Video Views·Apr 10, 2026
To see or buy my finished work and pottery tools, please visit my Online shops:
https://sawfish-endive-kgks.squarespace.com/shop
http://www.etsy.com/shop/hsinchuen
http://www.etsy.com/shop/hsinceramics
http://www.etsy.com/shop/hsintools
To watch more of my YouTube videos, please visit my channel:
http://www.youtube.com/@hsinchuen
To learn more information, please visit my Website:
www.mypots.net
Instagram: @hsinchuenlin
Facebook page: Hsin-Chuen Lin Ceramics
Pinterest: @hsinchuen6518
Texture roller I picked up from MKM at the national conference NCCA.
The full name is NCCA, National Council on Education for the Ceramics Art.
I use my handle to hook it on. To be able to do that you need to find the center and then
use a screw to lock it in here so the screw with the handle together you can roll more freely.
Stuff I designed it to find the center easier. First you need to find something that the
pencil or pen to for the tip of the pencil to be approximate the same height as your center.
It doesn't need to be exact. I'm going to use that to mark several lines and then when the
knife curls and you will be able to find the center. If the pencil is not very clear you can
use the marker to use the marker. To raise it up you can use anything that raises your tip of your
pen or pencil. I find the cap of the bottle is very useful. You just use a knife to cut it and then
your piece is sitting right there on the cap. You can use a tape to tape it just like this one to
tape it so it's in position. It doesn't move and then all you need to do is just go cross cross
cross and cross. Okay so let me do a demonstration on how to do that. This one here hold it in
position and remove the first line here and then you turn the second line and then you turn
there and just keep on going keep on going until it's all the line is focused on the same spot.
so it's all point right here there's a little circle there because this is not exactly on
the very center so there would be a circle and then there's a small circle in the center
that small circle is the center part and then all you need to do is just either use a needle tool
to punch a hole here right in the center so that this will be the driving hole for
the screw to go from there okay so you said either a needle or I have a special tool that I
made for this function and I just go there and then they punch it
now I find the center here and for this part here I guess there is a already engraving here
so sometimes it's very hard to find it and if that's the case you can use a piece of
clay just go rub the clay on to fill in that little gap just put the clay there and then just
rub it on and wait until the clay dry after clay dry you can use the pencil to mark it to
the very center is that there's a white point there so that is the center
and then you just use the punch or the needle tool to punch right there
and this will help the screw to go in there that is the center and that is center
and then just get the screw the smaller screw if you find the handle for me that I will include
several screws to go with it even the hole is not in the very center just to roll your
roller easily it's just that finding center is much better experience even it's not in
a very perfect center it's totally okay to let's show you that way to find the center
and then you drive the screw in right so that is the setup of the screw
and then all you need to do is just get the handle I designed it on the one side to hook it up
put your hand here to hold it in position right there and then this is very flexible so all you
need to do is just pull this until it's locked in here together and that's that's it and now
you can roll your roller easily roll from one wall to the other wall without limit of the length of
your hand the palm or the paddle this is what this tool handles all about
okay and then after that I will use one of them to do my demonstration on making the small objects
okay
this HR, VHR and LHR that is the size the length different length of the rotors
LHR 200 millimeters
HR 100 millimeters
VHR 120 millimeters LHR 200 millimeters and I have three sizes of the length for the length of
the roller the texture roller HR and I also have two different handle type one is a stainless
handle and one is a wooden handle although I have five sizes and the handle type for my design
thanks for watching and I will see you in my next video
