https://www.youtube.com/user/VideoJoeShows How to install toilet bolt caps is what this howto DIY video is about. VideoJoe has found some toilet bolt caps that need to be installed so he decided to roll up his sleeves & install them. The backing piece of the toilet cap is already on under the toilet bolt nut so the first part is already completed but the toilet bolts are way to long in order for the toilet bolt caps to get snapped down on there. What do you suppose needs to be done next? Right. You've got to locate something to cut with to cut those bolts off shorter. Normally VideoJoe would use a hacksaw & hold his mouth just right & cut the bolts down making sure not to mark up the toilet bowl with the hacksaw blade. This time he does not have a hacksaw or Sawzall but that won't stop him. Installing toilet bolt caps is easy...when you know how. Watch & learn as VideoJoeShows you how to install a couple of toilet bolt caps. Easy. Let's get to it then. https://www.youtube.com/user/VideoJoeShows
my favorite place the bathroom another bathroom and this toilet seat is loose look at that and
i thought it needed a new toilet seat but before i deal with that i was looking down here let me
get this set up here i wanted to show you this really quick do you remember what's supposed to
happen down here you've got a toilet bolt and there's a cap on there like that well that cap
supposed to snap on down there and before i put it on there i just want to make sure it's tight
and it is tight and you know normally i would cut that off with a hacksaw and i can't find a
hacksaw but i looked in the garage and look what i found this is a long sawzall blade and it's got
the same teeth as a hacksaw blade so i'm gonna take that and cut that off but you know i better
go get my gloves for this be right back i'm gonna get my gloves on here real quick and i'm just
gonna raise this up a little bit on here above the top of the nut i don't want to get it too high
because this still has to snap on there right okay so no hacksaw just i'm just gonna use this
blade it's like a hacksaw blade let's see what happens here oh man this might take this might
take me a little bit but you know what sometimes you have to do what you got to do to get something
it's going i couldn't find a hacksaw and i couldn't find the sawzall all i could find
was a sawzall blade get that there it is oh man that took took it all out of me okay now
you put this on you want to put it on one side and snap over on the other side don't try to put
it straight over the top okay i've got it pushed on one side there it is see that has snapped right
on and because you were so good with that i want you to do the other side look at the same thing
over here what's up with that man they did everything except cut the bolt off okay so
before i put that on i want to make sure that's tight i'm gonna chop that one off too you can do
i know you can okay thank you okay i'll be right out
oh yeah okay that snapped on got it bye joe
let's see see there snapped it on there you just want to make sure you got enough room
left above the nut and chop it off last thing you want is to cut it up too high i mean worst
case scenario if you cut it up too high you put it on there it doesn't snap on you gotta do it
again that's all i got for this time but i'll be back with more videos