https://www.youtube.com/user/VideoJoeShows How to install a toilet tank spud nut & rubber gasket assembly...Part 2 is what this DIY howto video is about. VideoJoe is right in the middle of trying to get the spud nut tight. He wished he had two sets of hands so he could really wrench down on the nut to tighten, as someone else held the toilet tank tree upright & in place inside the toilet tank. The joys of working by yourself I guess. Can he really get the toilet tank spud nut tight with just a channel lock wrench & hold the toilet tank tree & get the spud nut really tight at the same time? I'm wincing as I say that. Poor VideoJoe. Installing a toilet spud nut gasket is easy (haha), when you know how. Watch & learn as VideoJoeShows you how to install a toilet tank spud nut & rubber gasket assembly...Part 2 https://www.youtube.com/user/VideoJoeShows
This is what I'm talking about. Let me tilt this tank up so you can take a look at it.
Let's see this portion here. See how I got it kind of at an angle where this is over here and in
between those two where the two bolts are going to go? That's about where it was before. Now if
you have just two bolts you'll want to take this and have it straight like that. Do you see what
I mean? See how it's straight here? Well if I did that right now it's right in the way of that
screw, the bolt back there. You know in case I ever have to put a screwdriver on it later or
something let's say. So see if I keep it over like that then I can reach in there and tighten that
with a screwdriver, loosen it up with a screwdriver or just hold hold the bolt so I can tighten it
from underneath. You know what I mean? So make sure you check that out to see if it's at an
angle this way or straight on your toilet so when you get ready to screw this back down you know
exactly where it goes. I'd hate for you to put that incorrect. Now that I have the tree positioned
properly I'm going to try to tighten this up with my fingers as tight as I can get it. Okay
the last thing I want to do is mar up this when I get ready to tighten this up. Now
with my channel locks I can leave it like right here and just kind of twist it like that a little
bit. Oh my god it's twisting everything. I'll make sure that thing stays straight don't I?
Okay you know if I had a helper I wouldn't have to worry about it would I? I could have somebody
hold that while I'm while I'm twisting this nut. Now to twist it tighter I could hold it like that
I could put a screwdriver in here kind of pry down on it maybe even take my my pliers you know and
grab this and and kind of help do that with with two hands and try to tighten it that way but
I've got to do it in such a fashion to where I just I just want to get that pretty snug because
all that's doing is holding this in place and it's holding the other in place. I got to get
snug enough at least so that the other one is pulled in tight enough so it's not going to leak
water obviously but um you know I'm also going to get more of a compression once I put the screws
in there and bolt it that's going to suck this down tight to the toilet but uh we'll see what
we can do about getting this a little bit tighter now. Man I wish I had a helper here.
Now if you saw what was going on as I was trying to make this tighter this is kind of pooching out
a little bit because I got this nut I'm trying to tighten it right on the rubber gasket and it
didn't come with one of these little flat washers and this came this was in on the old one and I
think I'm going to reuse that and all that's going to do is help me to get this nut tighter because
it's going to it's going to want to slide around this rather than the rubber you know what I mean
and I guess I should have bought one of these at the store but uh that's not really going to have
a cause for making anything leak it's just going to make it so I can get this nut on there a little
bit tighter all right so I'm going to take this off this nut off of here
I got it on there pretty snug already you have to get that off of there and I'll put this on
see if I can't get it in there a little bit better
it probably would have been fine the other way too
sometimes Joe has a tendency to go overboard but in this in this case I think it's warranted
okay I'll reposition this make sure I'm going where I want it to be
and in fact that's making it slide nice and easy wow okay that worked let's see if I can't get
that a little bit tighter all right I think I got it pretty tight now if somebody was here they
could hold this for me you know in here in the tank and I could really wrench down on here but
you know if I try to do this and this see just by myself it wants to twist the whole thing
so I think I'm just going to have to get it as tight as I can and make sure this is positioned
properly if that's not positioned exactly I can reach in there and try to back it off a little
bit or take my nut and and turn it a little bit and twist it around or whatever okay all right
we've got that now I think don't mind that I was just seeing if that nut was tight that's
for the water fill valve and that's already in here so I'm not I'm not really concerned about
that right now main thing is I'm concerned about this and I think I've got that nice and snug as a
bug in a rug I think we're ready to take this back over to the toilet now and set it on there
you know for the sake of argument I guess I can put these new bolts
in here now so I don't have to do that after I get it the toilet down this tank on top
you know I could push these in now and have that sticking out you know it might be it might be
easier to get that ready now before I get it up there you know I can use two hands like this and
get it all get it all set yeah wow looks like that that's going to come out pretty far I'm going
to put I guess maybe I'll put that well I know that nobody's ever going to see that back one
right and I don't think anybody's going to see the left one either they might see this one as
they walk in through the door I'll show you what I'm talking about give me my thought process on
that now here's where the toilet is see if you're over here I only thought was you might see the
bottom edge of the nut coming through but you're you're really not here now I'm over here by the
door when I'm down the hallway I'm going to kind of squeeze through there like that now if the
bolt was sticking down an inch and a half as opposed to an inch like the other one
do you think you would see it I don't think you will now if you were down here you might see it
actually I think it's going to be all right I think I'm just going to go ahead and use the
long bolts not worry about it yeah so I'll have to work on these screws and get them through all the
like that okay I can I'll put these other two in and get it all set be right back
that was no easy task in itself just to put those down now I'm all out of breath
trying to fish those in there and screw them and stuff okay I've got that all set now
all right now I guess I can go take that over to the toilet