Another Way to Fix Sagging Door

VideoJoeShows
86 followers
4 Video Views·Mar 25, 2026
https://www.youtube.com/user/VideoJoeShows
Another way to fix a sagging door is what this DIY howto video is about. VideoJoe is on a service call. The report was an exterior door was not latching or locking. He determined the door was sagging & tried to fix the sagging door in the way he normally does. The door is still sagging so he can make additional repairs for another way to fix a sagging door, one way you may have never thought about. Fixing a sagging door another way is easy...when you know how. Watch & learn as VideoJoeShows you another way to fix a sagging door.
https://www.youtube.com/user/VideoJoeShows
AI Generated·May contain errors
Boy, I got my work cut out for me on this particular door. Okay, I got that hinge down. I got this
hinge done here. And the door is still hanging up at the bottom, which I thought it would.
But I don't want to, here's the thing, I don't want to mess with this door at all until I get done
over with this hinge side. And so what I'm going to do next is I'm going to do something that you
may have never known on this hinge to make this tighter. And usually your gap, you don't
want your gap much smaller than that. You see that nice gap there? But because there is a slight gap,
I know that this door can go over to the existing door jamb just a little bit more, don't I?
Even if it's not, you know, not rubbing, but just pushed up tight. I know that just that little bit.
Hey, does size matter? Yes, of course it matters. And I'll show you why next. Class is now open.
That's the top hinge to the door. And if you look on that, you're going to see that it's got
different nodules on there. You know, one, two, three, four, five. Look really carefully,
because sometimes there'll be three on the door and two on the door jamb. But in our case,
if I look on there, I know this second one and the fourth one, whatever, is going to the door.
Okay. So those are the two I'm going to work on. Okay. So I've got to pull this door off of the
door hinges to do this next step. But what I'm going to end up doing, I'm going to tell you
real briefly, I'm going to take this nib, just this, and I'm going to bend it over towards the
door. I'm going to take this one and bend it over to the door. And then when I put it back up,
can you see that this is bent over about a 16th or so, that I'll then be able to push this over
further. And these other three on the door jamb is going to hold this door in place. It's going
to move it over that little bit. Okay. That's my next step. I didn't want to do that first
because I, because I thought maybe I could move the jamb over a little bit, because sometimes
that works a little bit and then you don't have to do this next step, or maybe you don't have any
room at all. But because we do, that's going to be our next step. So it's time to remove this door.
Okay. I'm kind of limited with my work area, but I'm going to pop these pins out. And it's nice
on this particular one that the pins aren't tapped all the way in. If they were, I'd have to
go in from the bottom and pop it up. And sometimes there's a little goodie on the bottom where you
can't get something big enough in there and you got to put a little finish nail in there and tap
on that or whatever. I don't have to do that. I'm going to just take a screwdriver and I'm going to
do that. Okay. I'm going to take the bottom one off first and I just hang on to it, set it down.
And sometimes these are greasy, so you have to be careful with them, especially if you've got
carpet down. In this case, we just got plywood floor. I want to make sure that the doors open
just a little bit. Okay. Now I'm going to take the top one off last, like that. And usually the door
will stay up there. Okay. Now I can slide the door over a little bit, hang on to it and gently pull
it off like that. Okay. That's your next step.
