Refrigerator Door Won’t Stay Closed? TRY THIS!

DirtFarmerJay
310 followers
1 Video View·Oct 25, 2024
hey dear farmer Jay here from dirt
farmerj.com do you have a refrigerator
door that just isn't quite closing
anymore well if that's the situation
you're facing I'm going to show you
three things to check and a quick
appliance repair that'll take care of
that dilemma stay tuned
[Music]
farmer Jay here from dirt farmerj.com
thanks for visiting us in this episode
where I'm going to show you how to take
care of the problem of a refrigerator
door that doesn't quite close well if
you come around here you can see the
refrigerator that we've had for almost
16 years this dude has really served us
well it's a Kenmore which is made by
Whirlpool but it's worked really well
but recently dirt farmer Maggie and I
have noticed that when you shut the door
it just kind of stops like that doesn't
quite do the
thunk that closes solid and there's been
many times her and I have come back to
the door knowing full well we've closed
the door we nudged it shut and it sit in
there like that well what gives were
there's three possible things that are
happening let's look at them really
quickly the first one is please don't be
insulted because a lot of people have
had this happen where there are items
right in here that are simply sticking
out far enough to stop the door from
closing and sometimes it's not very
apparent it may be where you put
something in the back and then you put a
carton of eggs in the front or one of
those soft foam packs with meat or
something and it happens to collide just
right with one of these types of liners
we've cleaned this out for this video
here because we're going to show you
pulling this door off in a minute but
that can be a problem where there's
things here and there they're just
colliding so please don't be insulted
just check it and make sure that's not
the problem the second issue that can
happen is the seal on the door itself is
a gasket that's right along here and
this gasket sometimes starts to come out
and is therefore holding the door open
instead of doing exactly what it was
designed to do and that is to seal the
door up now if you notice here this
gasket
is flexible and what's inside of here
right here is a thin magnet strip or
ribbon that is of medium strength and
what this does is when you swing the
door shut you can hear it grab at the
last there it goes and that gives this
nice seal and that magnet cannot be too
strong because if it was every time
you'd open the door it would try to pull
the gasket out but you've got to check
to make sure the gasket has a nice firm
seat just like this along the metal
shell of the door and you don't have any
gaps if you do you'll need to pull that
out clean it out perhaps put a little
WD-40 in it use a toothbrush or
something to wash wash that out brush it
out and then reseat this back in there's
one other thing I want to show you real
quick just in case you may not think
there is a magnet in there a ribbon is
I'm going to take the the high strength
magnet I use for a stud finder and we're
just going to put it there and see do
you get it oh yeah there you go so there
is a ribbon that is in there but it's
only moderate strength and that's what's
providing that nice
Funk when you shut the door all right
let's suppose that you've done both of
those things and you still have a
problem where the door is just kind of
come into there and it won't quite close
well you're going to need to do a just
slight repair and this is a really easy
repair but it takes just a couple
homeowner tools and I don't care if
you're young old male female you're
handy or you're not this is a repair you
can do let me show you what you need
well that's a pretty simple array of
tools isn't it first of all you're going
to need just a
um a screwdriver that you may need to
pry a part out but you may not need this
but I just like to have this on hand
then you're going to need a nut driver
that's a 5 16 for our non-imperial
friends metric friends on these
refrigerators I found that are number
eight millimeter works just fine and
then I get an open end wrench or the
little ratchet end on it also so I have
these two 5 16s you're going to need
parts to fix and what are the parts well
you can see what it's called right here
door cams or cams for the door what in
the world are we talking about well in
the lower corners of the doors where the
pivot is there's a set of cams that are
interlocking so that when the door gets
close to the closed position it kind of
Falls in and holds the door and it sits
it well after 16 years of use ours is
worn out as you can see in this picture
boy they have just worn out over a
period of time but this is what they
look like when they're new so look at
the cams there and you can see they're
nice and sharp
and they fit perfectly so when I put
these together notice you get that nice
see there they want to fall back in
right back into shape and that's the
action you need so you can get these
through appliance repair uh part
Distributors many times there's uh
bricks and mortar locations in different
cities or you can go online and there's
a couple places I like to go to
ereplacementparts.com or Sears direct
I've got those both in the description
below and you can probably find your
part and many times these parts this
part fits over
I think 40 different refrigerators I saw
in the listing so a lot of these
refrigerators are made by the same or
limited amount of Manufacturers and the
parts are interchangeable all right so
what we're going to do now is we're
going to go ahead let me tell you what
we're going to be doing and then we're
going to show it to you step by step
first thing I'm going to do is take off
the Cosmetic cover and the hinge cover
of the top we're going to undo the hinge
lift the door off lay it on a packing
blanket on the floor remove the can
that's on the bottom of that door
replace it and put a new cam on the
hinge pin and then reverse put the door
back on put it there and it's a really
simple thing we'll have this done in
about 15 minutes so let's get to work
and I'll show you how it's done okay so
the first thing we need to do is take
off this cosmetic cover and so you're
gonna need a nut driver it's a little
tight there it goes all right
and let's just go ahead and remove that
out as you can see really simple that
comes off and here's the real workhorses
right here
these can be really tight
yep
all right
uh let's get a little helper on it I'm
gonna throw on
um
on one of these it gives me a little bit
more left
there we go
so I like to take off the back too you
can do whatever order you want notice
that uh I'm kind of holding the door
with my body over here so as we take
these off we're just going to go ahead
and go here we go
thank you
all right now that we have that we're
going to go ahead and lift this out
and as you can see that hinge pin is
what holds the door
we'll just leave that right there and
we'll go ahead the door is about ready
to come off okay let's go ahead and take
the door off you're just going to pull
it back
lift up it's going to come out of the
bottom pin
and when you do here you have the whole
door and now you can see why we emptied
this earlier before and you can have
this open if I wasn't explaining it we
would just go boom go very fast here but
the door is surprisingly light so if
you're thinking what this is going to be
really hard not really and there's good
places of grip so what we're going to do
now is we're going to use a packing
blanket on the floor here because we
want to keep everything in good
condition and we're going to lower the
door down and now we need to work on
right here there's the cam and it's a
little difficult to see but it is quite
worn and if you look over here also
that one is really worn as well so both
these need to come off and be replaced
so what we're going to do is go ahead
take our nut driver
pull this out as you can see it's simply
one nut
this is where that flat screwdriver can
come in handy to kind of get into it a
little bit
[Music]
there it comes
notice you just pull out the piece
there it is where I take our new one put
it in in its place
push all the way in
replace
the nut here or the screw
seat that in nicely don't over tighten
but just make sure it's good and snug
we're now done with the door portion
let's go ahead go ahead and repair this
part over here so we're simply going to
remove the worn door cam here
and notice now you have the metal hinge
pin right there we're simply going to
put this back
rotate it around into the right position
there
place
again nice and snug
these are self-lubricating if you want
you could put a little bit of like
lithium grease or something like that on
that but if you look close you can see
these are this is quite worn
and it should be after 16 years of
Active Family Life After I'd say it did
a good job here and these parts only
cost somewhere around six dollars each
okay let's go and put the door back on
you're going to have to finesse this a
little bit
to get it where it needs to go there it
is right there
go ahead and swing the door in place
I could feel the magnetics grab right
away and the door will stay there
long enough for me to put the top on all
right let's go ahead and put the top
together all right we can go ahead and
realign here if there's not sufficient
grease on here you can put a little bit
of grease on this we're simply going to
put it back in and we'll lift it
slightly to get around that nut
and then
I'll line the door back up
we'll just reverse steps here I'm going
to go ahead and start all these
you may have to wiggle the door a little
bit like this to align and that's
perfectly normal
let's go ahead and nut driver all these
down
make sure you don't tighten any one of
them all the way home initially just get
them all ready to Snug down
all right now one last thing to do is to
just look and make sure the door the Gap
along here looks good
and it does when I did that I have a
nice line which you can't see from that
angle you'll have to trust me
there we go we're going to go ahead and
drive these home now
and I'm just going to put a little bit
of wrench pressure I don't want to over
tighten too much but I'm just gonna that
helps me to make sure they're good and
snug there that one
benefited
all right now the cover goes back on
all right let's take a look and see if
we have fixed our problem okay let's see
if what we did works okay so I'm going
to take this I'm just going to slowly
close it look at that close those right
up and those cams now take care of that
wow if you found this video to be
helpful won't you like it and better yet
please subscribe to our Channel and when
you do please ring the bell because then
you'll get notified approximately every
Friday when a new episode comes out
about Maggie's Kitchen truck life
product reviews homeowner skills shop
life and all sorts of fun stuff where
you just do it yourself until the next
time this is dirt farmer Jay from dirt
farmerj.com
[Music]
thank you
