Wax Dipping a Leather Sheath Live || My Process

Carving and making leather goods
49 followers
2 Video Views·Mar 24, 2026
Hi guys, we were just attempting to do a live video and failed. I think we're having internet
issues. For some reason it doesn't want to process it. I don't think I have good enough
internet. I don't have fiber optics and I also don't have the best cell service. So I think
that's my problem. I'm working on getting that fixed and I do want to make some live videos
because it gives you guys the opportunity to kind of ask questions live. And anyways,
so I am working on that. But for today, since it didn't work, we're just going to do a one take
recording. I want to show you guys wax dipping my Buck 110 sheath in my wax bath here.
I wanted to also talk a little bit about how I started this whole process of wax dipping leather.
Started a few years ago when I made this pine needle basket for my daughter.
I was looking at ways to finish a pine needle basket to kind of preserve it.
And one of the ideas was to cover it in wax and put it in the oven and let the wax soak in. So
I thought I'd give that a try. I wasn't expecting much. I thought it'd be a mess
and wasn't sure it would work, but I did soften some wax and covered it all over
and put it in the oven at like 150 degrees for a few hours. And it came out really good. I was
really surprised. There's no residue on here at all. I didn't have to wipe anything off.
It's extremely strong. I can squeeze it really hard. It doesn't move. So it holds its form really
well and it's almost watertight. So it just did a great job. Much better than I was expecting and
that's what got my mind moving towards the possibility of putting leather in wax and
letting it soak into the leather and seeing what would happen there. So I did that, experimented
with it. Here's one that I've already dipped. Some of you guys have been watching the channel
already know a little bit about this process, but same thing. I didn't have to wipe any residue.
Well, you'll see what I did, but I didn't have to do anything after the treatment to make it look
like this. It just soaks into the leather. There's nothing on the leather, you can see, and it holds
its form really well and has great retention. So for these horizontal sheaths, I think the wax
treatment is really important. You can see how hard it is to pull out. So I'll show you how I
did that. I've got everything ready right here. This is my wax bath. It's just a crock pot that I
got it full of a mixture of about probably 65% to 70% wax and maybe about 5% lanolin
and the rest is Neatsfoot oil. So I think as long as you're around about 70% wax with another
oil or something just to kind of help soften the overall mixture so that it's not quite so rigid,
that's the idea. So I've got that heated up and I'll check the temperature here.
We're at about 171. I usually like to be about in the high 70s, so I'll kick this on. That's
Fahrenheit by the way, as you probably guessed, but 171 degrees Fahrenheit. I want to go for like
175 plus. It just seems to leave less residue on the leather at that temperature and that's
just been trial and error figuring that out. So I think I can go ahead and dip it in there. 171.
It's a little bit lower than I like to do it, but we're just going to go for it because this
is a live video, right? So you can get up here a little bit closer and see what this looks like
when we dunk it in here. Just veg tan leather, nothing special. I've finished the edges,
done all the sewing and everything like that. I've formed it to the knife and we can dunk it in here.
So I do have to kind of push it down with this, just using an old
chopstick. You can see the bubbles coming out.
Usually the warmer the wax is, the faster it penetrates into the leather. We want it to start
sinking because that way we know that the air is being replaced with wax. Sometimes I'll tip
it up a little bit, make sure there's no air bubbles inside. You can even flip it around
if you want to.
There we go. So just to make sure that there's no surfaces that
have like an air pocket or something in there that would prevent the wax from
contacting the leather. Now I just let it sit. I'll watch and make sure there's not a lot more
bubbles coming out. I want the leather to end up reaching an equilibrium with the temperature of
the wax so that it can move fully into the leather. It takes a little bit longer when it's
not as warm, so I'm going to give it maybe 15-20 extra seconds
since I didn't quite have it up to a high 170s temperature again.
All right, I've got just a rag spread out here just so that I can hold the sheath over that.
If it drips it's not going to get wax all over the workbench. And then I have another rag that
I'm going to use to hold and clean the sheath off. I think it's probably been in here long
enough. There's no more bubbles coming up. I can see there's no solid pieces of wax
on the sheath. Sometimes when it's colder it does that. I'll just dump out all the excess wax.
And what I like to do is I'll shake it because that seems to help get all that wax
residue out of the inside there especially. I'll just shake it up and down until I can see that
there's not a lot more dripping off of it. It's getting pretty good I think. We're about there.
So then before I put my knife back in here I'm going to just reach in, clean out the mouth
of the sheath there, and then I'll grab my Buck 110, put it in there, and just start wiping all
the excess off. Especially focusing on where the threads are because that seems to be what
parts of the sheath that hold on to the wax the most. I've also got this other piece of
leather I'll slip in here to help keep the form of the belt loop. We'll just go around and
get all the excess off of here as it cools down. All right so we'll let it cool. It's still pretty
hot. I can touch it but you can still feel that it's holding a lot of heat and we want it to cool
down before we pull the knife out because it'll sort of solidify around that knife and permanently
take that form. So while we're letting it cool we'll set it over here and I'll show you sometimes
what I'll do with these after I've dipped them. They've had a chance to cool down. I will take
them over to my dehydrator and the reason I use this is just because it it can be held at a lower
temperature than like the oven. It goes down to 95 degrees. So I'll stick them in here and I'll just
put them in here at like 95 or 100 degrees. I think it's set at like 105 right now and I'll
just leave them in there for like a half an hour and the idea behind this is in my mind it's kind
of tempering the wax like you would a steel for those of you who've done knife making or worked
with steel before. But wax solidifies in a crystalline structure so letting it equalize,
letting the structure equalize, sort of tempering that leather almost like tempering chocolate or
something like that. It just it makes the appearance a little bit better and more consistent
and I think it gives it a more consistent leather finish throughout or wax finish throughout the
leather is what I meant to say. So I'll do that and then I'll show you guys this. These sheaths that
I built here I've been doing more of a natural finish on some of my vertical sheaths because you
don't need the retention quite as much as you would on a horizontal sheath but I've been really liking
this. Curious to hear what you guys think about this. I'm trying a vertical buck 110 sheath. I
haven't made any of those yet. These are my first. So these are vertical 110 sheaths with Neatsford
oil and Resolene finish so there's no dye or anything like that. I really like how it has that
transition from darker to lighter here. Same with on the back with the belt loop. I think it looks
super cool and this is a buck 113. Buck 113 vertical sheath. So I've got a couple of those built
and I'll probably be posting all of these up on the website in the next
day or so but I wanted to show you guys that. Let me know what you think of the vertical 110 sheath.
Other projects and stuff that we're working on you can see the leather shop in here. This is
in my garage and it works pretty well. It's a compact space. I can't complain about this
space that I have though. I'm grateful for it but you know being able to also use this as a family
space and a work space for me can be challenging sometimes. So one of the goals we have,
I'll show you outside. You can follow me. One of the goals we have is to take our shop
and convert it at least partially into a leather workshop but you can see the state that it's in.
It's not in great condition. I'm gonna spare you from going inside because
the inside is worse than the outside. It needs the siding replaced, the doors replaced,
and I'm gonna have to build a couple of walls in there but I'm hoping that we can make this
the new leather shop this year. So I wanted to put that out there because sometimes just putting
things into the universe makes it more likely to happen but that's one of my goals is to just
create a really nice leather workshop and I would of course want to take you guys along with me
the whole build from you know milling up the lumber to do the siding, building the walls,
figuring out what to do on the inside, and making it sort of my custom ideal leather workshop. So
I'm kind of looking to you guys for input there. What do you think I should do? Things that I need
to include, must-haves, how to put the workbench orient things in there. Anyways so just some
goals that I have for this year. Let's go back in and check out that sheet that we dipped in the wax
and see how it looks and then we'll end this live stream. Okay it's cooled down pretty well.
I think the finish looks pretty nice on this. You always get a little residue on the knife when you
first pull it out and so what I usually do is I'll insert this, take it out, reinsert it several times
until there's no more residue that comes out on the knife. You can hear that really nice click
that you get once the wax cools down and hardens. So actually not a lot of residue at all so we're
pretty clean. We can take this out. That's going to hold its shape. So I'll just go around and look
and make sure that there's not like any chunks of wax that I missed or something. And sometimes
what I'll have to do on these threads is I'll take an awl if there's some some of the holes
sometimes just get a little wax build up in them. The other ones didn't do this because I
I dipped them at a little bit higher temperature and that helps prevent this. You don't want to
go too hot because you can burn the leather but that high 170 is just below 180 degrees Fahrenheit
seems to be the magic number for me. But that's actually pretty much it. I think other than that
looks pretty good. Yeah, so that's my wax dipping process. Now this does get a little bit of
discoloration. You can see where the leather might get more stressed from a contact point when you're
inserting your knife but that does not hurt anything at all. In fact it kind of goes away
over time with use. So you can always
reheat this. There's a something that happens with wax over time it gets a what's called a wax bloom
where you might get sort of a creamy color that blooms across the surface of the wax in the
leather. In fact I probably have some older sheets that I haven't used. Let me show you guys this
because I've had some people ask me about this but you can see that a little bit. This is years old
this sheet is and it gets that wax bloom and it wipes right off or what you could do is just put
this in the car on a warm day or something that's going to warm the sheet up to like
95 100 degrees if you don't have a dehydrator like I do and that just disappears. So that's
a natural thing that happens to wax and it's part of that crystallization process that I was talking
about. Usually the older wax gets the harder it becomes so it can become more brittle over time
but when you re-warm it up it gives all of those that crystalline structure a chance to reorganize
kind of temper back down and and renormalize or something like that. I guess normalizing
be a better word than tempering.
This video is getting too long but I just wanted to show you this is one another one that's years
old you can see that white kind of bloom on there hopefully it's showing up on the camera but
it just wipes off so this was for my my Bark River Cub and just wanted to show you that
it still has a great hold on the knife a great form I'm still not worried about that
my clip needs to be tightened but anyways the the wax finish lasts a really long time I've
been really happy with it and I think especially for a horizontal sheath like these ones it's a
great option for retention so there you go that's my live stream I'll throw this up I'm not even
going to edit it you just get to have the raw experience this time I'll get my internet figured
out and then we can do some real live streams where you guys can ask questions live comment
live I want to do some more of these where I show you kind of sewing process maybe some other
processes that I use when I'm building things especially my knife sheaths so that's it thanks
for watching
