How To Tool An Oak Leaf & Acorn Wallet Pattern

Carving and making leather goods
49 followers
Hey guys in this video I'm going to show you start to finish how I tool this oak leaf and acorn wallet
pattern and this is included in the new volume two of my leather tooling patterns book but I
have it cut in here or not cut in here I have it transferred here ready to cut in so let's
set that one aside and we're going to get right rolling here. So when you cut those lines it's
really important that you keep those that stem there following through that kind of that main
center center line that's going to be the focal point when you look at those leaves
so we want to keep the distance on those nice and even as they taper down towards each other
now we're going to roll through cut these outside lines and notice when I come at those points
I'm not going to actually connect those with my knife
I've gone through that in pretty good detail if you've been through my tooling course online there
or in person but the reason for those we don't want to create a weak point in that
leather so we're going to connect those with our bevel rather than with our knife
now this this point here there in there where these those leaves are rolled up on the edge
it's important to get those lines fading close to that outside line but not crossing it
and that's gonna really help to get the realistic look of those folding up as we tool that out
that's that outside now here's another one where it folds up here so as I bring that down and make
that's close but not crossing there work on this other leaf here first and then I'll come back and
pick up my acorns there at the end and you don't necessarily have to cut any of this in in one
particular order but it's just how I'm choosing to cut these in again here's another one that's
folded up so down close but not crossing and we bevel that out it's going to be a lot easier to
get that bevel close and get that realistic look to it all right now our acorns
get those all cut all right now we're set we're ready to go to our bevel I'm gonna
I really like the impression this bevel gets it's a nice sharp impression doesn't
cast too much shadow out there but it gives a really nice look to that
different people are gonna have different techniques to tooling oak leaf and their
patterns may look a little different so I'm not saying this is the only way by any means
it's just how I tool them and I hope that you can find some value in that and helps you
as you develop your own style with tooling these
notice as I'm beveling I'm not fighting this bevel to get down in those corners or around there
I'm actually going to come back with a round bevel that's going to fit in there really nice
I'm moving my way down my pattern and I'm beveling everything I can reach from this direction
and then I'll turn that pattern over and bevel everything from the other direction
all that's for is for efficiency keep speed up in your tooling every time you spin that leather
around it takes time so the more efficient we can be more profitable you can be if you're running a
business or just the more you can get done if you're doing it for a hobby so all about being
efficient anywhere we can now I can almost it almost caught me there just about flipped it too
soon a couple more lines I can get there now I'm going to rotate that around and reach what I can
from this direction again there's some of these curved lines in here that I'm not getting all
the way because I'm going to come back with another bevel that's going to fit in there better
now this bag I'm moving around here this is this is just a little weight bag helps me keep that
leather down in place so it's not wanting to slide around as much while I'm running those bevels
acorns always good to practice running those bevels in both directions right to left and left
to right that's going to help make you a little more versatile in your tooling be able to fade
those lines both directions and get through your patterns a lot a lot easier all right now like I
said I'm going to switch bevels I'm going to go to uh this is a smaller round base bevel so this
bottom face it's not flat like the bevel I was just using but it's rounded so it's going to be
able to come on the inside of these curves nice smooth round lines there and the little tighter
round curves really fits in there good and we'll see where we'll come back later with the same tool
use that in place of a lifter as well through the insides of these see how clean that is on the
inside of those that's such a good job if you don't have a round face beveler but you have just
a smaller bevel you can always size down to get inside those curves as well around here
really like the definition that gets us
especially in here where that's rolled up like I said this is where when we bevel
come back really fade that line right down towards that outside edge it's going to help that overall
look to us okay quick little double check make sure we got everywhere on those leaves now we're
just down got one more down here and then just on the inside of these acorns nice and light around
there okay we're looking pretty good there now I'm going to move over to what I use for a shader
I'm going to use this vertical line thumbprint I love this tool this is going to I'm going to use
right here in place of a leaf liner
being careful not to actually run into that stem with it you'll notice the angle is angled up
out towards that outside edge from the tip and fade back as well
the whole time I'm doing that I'm being mindful of my angle which way that's there
but then I'm watching this little edge make sure it's not running over that stem
down on this other
and that's tipped back this way too so it softens that outside edge I don't want to see that
full tulip impression mash down there rotating that angle as we move down towards the tip here
and just like a bevel I'm able to go back through and smooth that up as we go
okay now I'm going to take it to the outside edge and we'll start running some shading out here
I'm going to get a little bit darker coming out from underneath this piece that's rolled up over
itself and I'm going to start working around this outside here
again I'm watching this ridge I'm going to keep that highlighted ridge
going and lighten that off there when we get out to that inside curve so we'll come back and lift
that up it's going to really add a lot of depth to that I'm going to go real light on that inside curve
there we go all that just creates that highlighted little ridge around there
now I'm going to come to the other side of that same leaf work my way back down doing the same thing
some shading underneath here showing the depth of that piece rolled up over itself
okay now we're going to flip over here and do that same thing so see the difference between
those two leaves just that extra shading on the outside and getting that little ridge there
really kind of brings that leaf to life now we still have more to do to it we're not done yet
but I just want to kind of stop there a second let you compare those two before we move on
all right now I'm gonna do a little bit of shadowing
underneath that acorn there showing that's definitely up on top of that leaf
around here being going pretty light when it comes down to the inside of those curves
the whole time I'm walking around there I'm going nice and easy smoothing that line up as I go
but I'm being mindful of that angle I'm not tipping this around keeping it perpendicular
to the edge there I'm always keeping the vertical lines on this tool coming down
at a consistent angle back towards that stem flip that around and work around this way as well
you almost hear that difference as I'm tapping it okay now while I have this
shader out I'm going to come in here and just really lightly inside the acorns there
and that's hardly noticeable till you start adding in finish to that once we kind of oil
antique and do some things like that that's going to pick up those fine little details like that
right down here
it's nice and easy and making sure that fades out that it's not a crisp line coming off there
all right next we're going to grab a veiner and this just happens to be a small bit
small veiner here it's a scalloped and lined veiner but I'm going to come on the
outside of this stem and put in some veins there now what I'm going to do is I'm going to bounce
that out on the other side and come right off the same point same thing on this one here
you notice I have that tool tip pretty good because I don't want to see that
full tool impression coming down it's going to get a lot more natural look when it
fades out of there and not just a chunk with a tool
okay now I promised I was going to come back to this round bevel
and we're going to use that as a lifter again here when when I come back with that I'm just
touching up crisping those corners up in those acorns there but then on the leaves is where it
really comes into play underneath those round indents there really brings that definition and
gets you the depth that you're looking for almost picks that leaf right up off the leather
again where that folds over come back lift that back up again
because as you're tooling especially when you're doing your shader and
running that shader out to create that little highlighted ridge
and kind of mash that leather down a little bit with it so it's important to
come back and touch that up
and it brings that work out to the next level a little bit
this one now inside these ridges lift those up as well this kind of provides just a little bit of a
different twist to the kind of the traditional oak leaf patterns but I think it works out all right
okay now we're gonna come back with uh actually I'll hold off on that decorative cut I'm gonna
run a few different background spaces in here and then we'll finish off with our
decorative cuts so this particular pattern just has a little bit of background right down the
center of it here you can do either way you can stand it apart by backgrounding it and you can
dye those or you want to leave them but then if you're doing some dye work match it up with
what's on your outside border and lots of different looks you can do when it comes to backgrounds
all right now with our swivel knife we're back for some decorative cuts
so first thing let's go through I'm gonna put some little curved lines in here
coming from that outside edge curving around on those kind of the cups of those acorns there
I'm gonna come back the other way across there creating that kind of crosshatch look there on
those acorn cups curve lines one way and then turn that knife and we're gonna curve back the other
way across there the curved lines as opposed to just running straight lines is gonna give that a
little bit more of a rounded look a little more realistic curve to that all right now those
acorns are looking pretty good but we can still touch that off a little bit with a few little
cuts out here on the end that brings just a little bit more to them there
all right now some decorative cuts in these leaves themselves always trying to keep from doing just
straight cuts want to have a little bit of curve to them not going overboard there we have it
okay that is our oak leaf and acorn pattern from volume two of the leather tooling
pattern book and that's actually available November 1st on the website which is in the
description there so there's lots of other patterns on there available as well if you're
looking for a belt pattern with the oak leaf and acorn that's on the website as well so
if you follow that link you should be able to find what you need there any questions that you
have shoot those at me and i will try to get those answered the best i can so appreciate you guys
taking the time to watch and follow so be sure to to follow the page here so we don't miss out
on any more videos take care
