How to Hand Stitch Leather: Get Better, Fast!

Carving and making leather goods
49 followers
Hi I'm Tanner and this is Clearage Leather. Welcome to the shop. Today we're going to be
talking about saddle stitching leather. Saddle stitching is a technique where we use two needles
and one thread to join some leather together by hand. It's one of those foundational skills that
I think every leather crafter should at least know how to do and to do pretty well. Whether
you use a sewing machine or not it's a good skill to know. So by the end of this video I'll show you
all my secrets, everything I've learned to make the best stitch possible. But before we even touch
the leather let's go to our trusty whiteboard and talk a little bit about the theory behind
the saddle stitch and exactly how it differs from a machine stitch. So I drew what hopefully you can
interpret as a cross section of a piece of leather. So like if you're looking down through a piece of
leather we've cut it off right where our stitch holes go through. That's what we're looking at.
So in a saddle stitch we have one continuous thread which goes back and forth and joins the
pieces of leather together. So in this case I'm going to use a red marker and a blue marker
to represent the two ends of that same piece of thread. So if for example it started here the
blue one it's going to come in this way like this. It's going to zigzag through so it's going to go
back and forth on the top side and the bottom side and back and forth and then the red is just
going to do the very same thing starting at this side. It's going to come and just go the opposite.
So where the saddle stitch has each individual thread going from one side of the leather to the
other a machine stitch on the other hand has one thread staying on one side while the other thread
stays on the other side and they meet in the middle and they kind of interlock with one another
in the middle of the material. So this one's going to kind of come and just dip in there
like that. It never actually travels through and gets to the other side.
So the the other thread is going to come in here and tie a little knot in the middle
just keep going like that. So these are two separate threads whereas in saddle stitching
it's just one continuous thread. So this is just a different way to show how each of the two threads
pass all the way through and alternate as they go along on the saddle stitch. I'll get a little
bit more into the technique in a minute with actual needles and thread but this is a pretty
good way to demonstrate the theory of the saddle stitch. It's not quite as easy to show how the
machine stitch would work. Basically the bottom thread the blue thread here would come up from
the bottom kind of make a loop and then there's a cool mechanism inside this sewing machine that
will then catch the top thread and pull it back and it's going to make a knot ideally in the middle
of your material between the two layers. So it's going to come up back down that's a little bit
more like a machine stitch. So one nice thing about hand stitching leather is you really don't need
very many tools at all and the tools that you do need can be bought pretty inexpensively. So I'll
put a link in the description below of some of the more basic tools that I used initially for a few
years like some stitching irons I got from Amazon that were less than 20 bucks for a complete set
and they worked pretty well for for quite a while before I upgraded. So you need some stitching irons
or pricking irons you might find different names and they might have different characteristics too
we can get into those details maybe in another video but basically these just punch the holes
in your leather or mark the holes in your leather. You'll need something to tap on this pricking iron
with. This is a mall a Bury King mall you can use a rawhide mallet or a plastic mallet but you don't
want a metal hammer. You're going to need some thread. I like to use this is some polyester thread braided
polyester this is a 0.55 millimeter thread it works well for the things I like to make and you
need some needles. So these are John James harness needles these are really inexpensive. They come in
a pack of 25 and they seem to last just about forever. They rarely break or bend or anything
like that so they're just these nice little needles they don't have a sharp point it's kind
of rounded so that because the poking is done with your irons or your awl not the needle itself.
This is a stitching clamp it's a nice thing to have this one is particularly nice just because
it's easily positionable. It just gives you a third hand so that it can hold on to whatever
you're stitching so you don't have to hold it on your lap. This is the first one that I made
when I got going it worked pretty well it's nothing fancy had a lot of a lot of imperfections
in terms of the function but it got me by for quite a while so if you want to get crafty and
make your own that's perfectly doable but I do think it's kind of a handy thing to have.
Now I'm going to use my stitching iron right in this line that I've marked along the edge here.
I'll do my best to line those teeth up splitting the difference on that line
and like we said this is going to go all the way through you can see how those teeth are coming
through on the other side we'll lift that up we'll just catch and catch that last hole to make another
another few holes here. So you've probably noticed that these are slanted stitch holes
every teeth on this stitching iron is slanted up at a diagonal angle so that will help to
give us a nice diagonal look to the stitches that's definitely not a functional thing it's
totally aesthetic but I think it adds a really nice classy look to the piece so that's why I
chose these particular irons you can also find some that are just straight holes just round holes
all in a row you can find some that are just like a straight line like a dotted line where the slots
are not slanted they're just kind of straight so that'll just give your stitch a little bit
different look but for the kind of stitching I do I like to use these slanted irons.
I think we're about ready to stitch some leather so the first thing we have to do is to determine
how long our thread should be so I like to use about five times the length of the stitch line
on the workpiece five times usually gives me a pretty safe place to start sometimes I find out
I have a little bit extra at the end which is just fine you don't want to come up short
if you have a really thick piece of leather you might need a little bit more thread than that
but I think let's start with five times on this one. So once more I'll give a little disclaimer
that this is the way I do it this is the way I've found that it works really well for me there are
some other people on the internet who do it other ways and it works really well and they do beautiful
work so I just want to show you how I do it because it works well for me. So we've got our thread
measured out I'm going to put our needles on either end of the thread so like we mentioned at
the very beginning saddle stitching is done with one thread and two needles so now I'll show you
how to put the needle onto the thread so it's well secured on each end of this thread. So like I
mentioned this is a braided polyester thread and it makes this part a little bit easier than if
you were to use something like a linen thread. So the first thing I'll need to do is put this
through the eye of the needle which is sometimes easier said than done and then I actually pierce
in between the braids in the thread pierce that with this needle you can see it's actually gone
right through the middle of the braids and then I just pull that knot right over the end of the
needle and up toward it and that's on there securely. So I'll show that one more time with a
different thread this is Ritza Tiger thread it's a waxed braided polyester thread. I like to use
that sometimes as well so it's a thread that kind of lays flat instead of that more round thread
like the twist thread. So through the eye of the needle we'll pull it through a couple inches
and we'll pierce in between the braids you can see it's pierced in the middle there
and then we're going to bring the tail here back down and just pull it over the end of the needle
over the head of the needle and then just give it a little tug and I don't always like to pull this
straight up to the eye of the needle sometimes it's good just to leave a little slack there
that probably helps it go through the stitch hole a little more easily.
So there are different ways to do this again this is the way I like to do it though.
I'll try to show this from several angles but to get started just need to get our thread through
the first hole here and I'm going to pull this through so that I have even lengths of thread
on both sides of the hole. I've got one needle on each side here and the stitch holes are slanted
toward me so the the top edge of the hole is up in a way and they come down toward me and that's
the way I usually like to stitch and that all comes again from those slanted pricking irons
that I use. So the next thing I want to do is put my right needle through just to open up the hole
on the left side. I'll take my left needle and poke it through that hole and then take my right needle
and put it behind this needle that just came through and that makes a little t
pinch it with my thumb. I'm not going to pull it through all the way just about this far so I'm
going to pull this thread down and toward me to the front and lower corner of that slot.
Take this needle that's in the back now and poke it through the upper part of that slot that's
away from me. Now I'll take this thread and just go over the top and pull it through a little bit
of tension. I'll show you that again here and I'll show it to you from a different angle. So
that goes through just to open up that hole this comes through from the left side this makes a t
and I'll pinch it with my thumb pulls it through a little bit and I'll use these fingers to kind
of tension this down toward me this goes through the upper and further away part of that slot
this thread goes over the top and a little bit of tension. There's a little bit different angle
open that hole up come through from the left side make our t and pinch it come through just
a little ways here and we'll use these fingers to tension this pulling it down to that bottom part
of that slot and this goes in the upper corner away from me again just lay this over on the
on the other side and bring it through just a little bit of tension here. So one thing you'll
see me do is to bring my right arm and pull that thread down into my right while the left thread
goes up into my left toward the ceiling so that helps to orient these threads and help establish
that nice slanted stitch that we're looking for. I'll show you from the side in a minute how that
works but so my right arm is going to go down to the right left goes up to the left.
So that's looking pretty good looks like we got a nice angled stitch on the front side
as well as on the back side so I'd really struggled with that before.
If you've struggled with that too I hope this method helps you to get that nice consistent
look on both sides. You almost can't tell which side is the better side which I had some trouble
with that before. So now now that we've finished up let's say that we got to the end of our stitch
line I'll show you how to stitch back a couple stitches so that that locks it in and is secure
and will never come undone. So before we go any further and before I show you how to back stitch
I just have to say that I noticed this stitch too and it's driving me crazy. So you can see how one
bad stitch can kind of mess up a whole stitch line. So if it were a wallet or something like
that I was making I would stop and I'd go back and I'd fix that one. That just makes me makes
me cringe and it probably makes you cringe too now that you see it. So anyway pay attention to
each and every stitch the more consistent you can be the nicer workpiece you're going to have.
So when we want to back stitch now I'm going to kind of start my I'm going to open up this hole
again see you can see I'm going to go right underneath this last stitch here and then I'm
going to come up from the bottom on the back side pull that through and again I'm going to pull this
down toward me and this time put this thread up just above that and bring it through the back
side. We're not going to do that little loop over at this time you can see how it made these
kind of go nice and parallel next to each other. Once again I'm going to go kind of underneath this
up from the bottom side here pull this down toward me and this one's going to go up through that like
here again nice and parallel we can go two or three. I usually go two some people like to go
three so we'll go three here and then we're done. This is where some people can go a different route
cutting these and adding glue. I personally don't like to add glue I just like to take this and put
it through so that I have both my ends on one side like if there's a side that of the workpiece that's
not going to be seen as much and I'll snip these on the back side which I'll show you a minute and
I like to just burn them it's maybe not as clean as the way that some people do it with glue but I
think it works pretty well. So here's how that back stitch is looking not too shabby here's on the
back side so I like to just snip these leave just a little bit maybe a sixteenth of an inch here
about that much and I just burn it with a lighter and you'll this is a polyester thread so it kind
of melts down just two little beads and then just touch them and to me that's a pretty acceptable
finish so I like that. Okay that's it that's about everything I know about saddle stitching
thank you so much for watching again I really appreciate your support I hope this was valuable
for you if so subscribe I got a lot more content coming down the road that I'm pretty excited about
and as always if there's something you want to specifically learn let me know and I'll really
try to incorporate that into future videos so thanks for joining me I hope this was helpful
for you and I'll talk to you soon!
