Repairing An Eico Tube Tester ... So We Can Test The Tubes In This 1931 Atwater Kent Radio!

Amateur Repair Time
257 followers
868 Video Views·Mar 22, 2026
Also, we repair an EICO Tube Tester.
Check out our Patreon page, for all of our channels. Contains outakes, concise arcade repair tips, bloopers, repair FAILS, Audio youtube wouldn't allow us to upload, and much more!
https://patreon.com/JoesClassicVideoGames
------------------------------------------------------------------------------------
AI Generated·May contain errors
Ladies and gentlemen, welcome back to Amateur Repair Time.
I have been working on this Atwater Kent Model 72 radio for several weeks now up here on the
channel and we've been working on the chassis pretty consistently. So we did a video where
we kind of took everything apart and checked out what was going on with it, did some research.
We did a video where we took all of the sardine cans inside of it and took all the old caps out
and put brand new caps in, capacitors, which was like the bias caps and things like that.
And then we did a video where we worked on the filter capacitor, which was a beast.
They're in these big cans that you got to cut apart and everything.
After all that, I kind of came to the realization that you might be able to get away with on an
Atwater Kent not replacing any of the capacitors. I know that sounds shocking.
Do a little research on it though. A lot of the Atwater Kent guys just use the original
caps because they're so well-made, but we replaced all of ours, so all of ours are new.
And we did a video where we worked through the resistors. This is a very strange set of resistors
in the chassis. This is a Model H chassis. All of the Atwater Kent stuff seems to be pretty
nicely made high-end stuff. And it's old, it's 1931, so they kind of had their own unique way
of doing the resistors and things like that and the way they were mounted. We covered all that
in a previous video. We also looked through all the chokes and things like that. The resistors
were very strange though, the way that you would mount new resistors, so we messed with that a
little bit. But we seemed to have checked out all the chokes and the coils and all of that,
and it looks like everything's going to be fine. We also did a video where we worked through the
power transformer, figured out what it was. It's a replacement. We did a bunch of research on that,
tested all the voltages. Everything seems to be cool. So we're up to the next step is we need to
check all of our tubes. And they're 1931, so I don't know if these are also called octal,
but they're similar to octal, but they're the numbered ones. So this is a 45,
or I think this is an 80. And then these are, oh, these are the old Cunningham ones, 27s.
So I believe I read that the Cunningham tubes were original to the Atwater Kent set. So these
may actually be the original tubes from the sets. I also read, this one says National Union.
I also read that sometimes these Atwater Kents, you can find them with a complete set of the
original tubes because the radios were being, technology was moving so fast that the radios
would be basically out of date. I mean, they still worked and everything, but they would be
obsolete. That'd be the best way to put it. That the radios would be obsolete by the time before
the tubes went bad. So I've heard that a lot of times you can pick these up with the original
tubes still in them because nobody's really used them much since a couple of years after they came
out. And whether that's true or not, I don't know. And this is like, like I said, this is a 1931
model. So that may hold more true to the earlier in the 20s models. But my 1931, this is a super
head set and you know, a 1940 model, I wouldn't think would be too much, wouldn't have too much
better reception than this, but we'll see, whatever. So we got to test the tubes. So I
have never been able to test these older tubes because my, all of my testers won't test them.
And so one of our viewers was mentioning, and I think they may have been the same gentleman,
but they mentioned, I think somebody mentioned it before, that a lot of the old tube testers
actually will test these early tubes, but they're not listed on the charts that come with it. You
have to look around and find an obsolete tube information, you know, the reference material
for obsolete tubes for your tester. So I started looking around and I've got some kind of weird
stuff. I've got this one thing that's a radio tester, and it's basically like a little kit
that you plug into where the tubes go on the radio and the thing simulates a tube. I thought
that was something else. So that's not going to help me. And then I looked at my main
BK tester that I've got, and it doesn't even have sockets for it. You can't even,
you can't even plug the tubes in anywhere. I mean, it's, and it doesn't have a universal
setup or anything. So I kept looking, I kept looking, and then I remembered this.
So this is an IKO that about a year and a half ago or something like that, here on the channel,
I did a video talking about a radio repairman named Bob that I bought all of, he passed away,
and I bought all of his stuff, his radio stuff from his son and his daughter. And
one of the things that he had was this tester. Now the other tester that I use all the time,
the BNK also came from him. But this particular tester is kind of interesting. One,
this is a homemade freaking case for it. So he made a little, or I assume he did it,
somebody else may have did it and he picked it up somewhere, but it's got like a little
homemade case and the IKO tester has been mounted in it. I've got it upside down right now.
But whenever I got it, it had some of these old tubes in the case here with the old
sockets. And sure enough, this damn thing does have the old
sockets on it. So this one ought to do the job. And then the other thing that's a dead giveaway
is the filament voltage. It'll do 2.5 volts filament voltage, which is what the old ones
used. So I think we might be able to do it with this thing. Only thing is it doesn't list on the
reel here that you, that you roll through. It doesn't list these old tubes, like an 80 isn't
in there and a 45 isn't in there. But if they've got these on there, old, I guess those are octals
there. Maybe that one is. If it's got these on there, surely it has the ability to test them
and it can do the 2.5 volt filament. So I think we can do it with this, but I'm going to have to
find the paperwork for it online. So this is an IKO model 625, if I'm reading upside down properly.
So it's an IKO model 625, and maybe we can use it to tell us if these tubes are any good. Now this
isn't the best tester in the world, but it will give us some kind of indication of if there's a
short or if the thing seems to be performing properly. Not as good as the, what do they call
another one, the mutual conductance or whatever. It's not as good as that, but it should get the
job done. So we're going to use this to test these tubes out. And there was one tube missing.
Apparently the 80 rectifier was in the spot that one of the 45s is supposed to be.
So of course the most expensive tube, one of the output tubes was the one that was missing.
Of course, but never fear. I've got a whole bunch of these older tubes laying around. As
matter of fact, there might be some in this box. So maybe we'll test the ones that go in it. Maybe
we'll test these here too. And I can, I've got a bunch of those boxes that you store them in. And
if I figure out that they're good, we'll store them away for use in a further radio. But anyway,
that's what we're going to do today and see if we can figure out how to hook this thing up to the
old tubes. Finally, I did a video on, was it this Silvertone where I had the same problem,
or it may have been that one. That's an old Philco, I believe. So I did that one and I did
that one. And one of those two, I think had really old tubes in it that I had no way of testing. So I
just put them in the radio and let her rip. Okay. So I found the obsolete data, just like
I was told. And this is like the official one from IKO. Paperwork. I printed out some of the
manual too. This is the official one. Supplement to roll chart, obsolete or seldom used tubes.
And I also printed out some of the manual so that I could figure out how you're supposed to use it.
And then I looked through it and it didn't have the 80 rectifier on it.
So I looked online and there is yet another list. So I think the other list though,
looks like someone made it. So I think what happened was somebody just figured out some
of the other tubes and made a much more complete list. It's like 100 pages or something else. I
didn't print it all out because I've still got most of them on here. So I just wrote down
the 80. So let's see how we're supposed to use this thing. And then I believe that is an 80,
the one that's unmarked. It makes sense. I mean, it should be in there. And then I've got a couple
other ones that have kind of a different construction, but I know they're 80s because
they are marked. So let's see what it says that how we should do this. Designed to test
practically all current radio and television receiving and a number of commonly encounter
transmitting tubes. With this basic purpose in mind, concentration is next placed on simplicity
of operation and circuit flexibility regarding new or future tubes. All of this we don't really
need to read. Testing a tube is merely a simple series of steps. Do not plug tube in the socket
until all controls are set. Okay. One, tube number. Select the tube number under the heading mark tube
on the roll chart. Okay. So we can't do that. We got to use our list and we're going to do an 80.
So there I have selected it. Shunt. Adjust the shunt control on the panel for the number marked
on the roll chart. 55. 55, baby. Close enough. Filament. Set the filament switch to the same
value as shown on the chart. 5.0. Bam. Selector. Set the selector switch as indicated on the roll chart.
3. Line adjustment. 4, 3, 2, 1. It just doesn't line up, but that's 3. The next two columns are
for the 10 lever switches and refer to their up and down positions. Unless otherwise indicated,
leave all switches in their center position. Okay. Well, that's good. I think I've messed
with this before, but you know, they're all different. Okay. So up, we want two up and we
want one down. Insert tube in proper socket and turn the power on. Okay. So here's what we got.
This is definitely an 80. It's an RCA 80. I didn't clean the pins, but I think it'll be all right.
And you know, it'll only go one way. I don't see nothing. Okay. Let's see here.
Line adjust. Set the selector switch to line adjust position.
Adjust line, adjust potentiometer until the meter reads within a division of the line.
I guess they're saying line. Okay. Well, there we go. Okay. Short neon bulb will light after
proceeding step only if a short is present. That did not light. Okay. Do not test the shorted tube
any further as damage will result. Since the filament selector will apply any voltage selected
to a tube under test, care should be taken to check this setting in order that no higher than
rated voltage be applied. Disregarding this may cause burning out of the tube under test. This
is true in all tube testers. They're trying to say, look, it's not our problem. By the way,
I see no filament. It could be because the legs are dirty. Merit switch. Depressing this switch
will indicate the condition of the tube. Where is our merit switch? Here we go. That's good for a
rectifier, isn't it? So it must be that it's lit up and I just can't see it. Okay. So let's turn
it off. And it is hot, so it was working. So that's a good one. That is a RCA, didn't we say?
And you know, we're testing the easy one first. These usually are good.
So here is the suspect one that was in the system. The composition of the, excuse me,
the inside of it seems very similar, but those two middle things are different. So
look at this one. So this is an old school one. It's kind of got that going on, but it's just
slightly different. So let's try our one that we got out of this set.
Let it warm up a little bit. Yeah, you can see the filament at the top. Let's see if we need to
line adjust again. Okay. The short did not come on. Oh, you know what? There was a second test.
I forgot about that. Let's do two tests. Oh, that one's real good. That RCA looks like a dog
compared to this one. Okay. If more than one listing is given on the roll chart,
it is because the tube under test is multipurpose. The procedure is to test the first row of figures,
then reset and test the second, third, et cetera. If any test shows bad, the tube is defective.
The IKO 625K has been designed with two grid caps, a feature usually available only in more
expensive equipment since many tubes are so provided. Note, in all cases, except those
tubes requiring two grid caps, the right side cap will be used. The right side grid cap is
controlled by lever switch number 10. The left side grid cap is by lever switch number nine.
So you should use this one. That might end up being a problem. Why the hell would they do that?
Oh, it's probably, they probably all use the five pin one. So maybe we can get to it here.
And this is the 625, not the 625K. I don't know folks, whatever.
To test for tube element shorts, the lever switch is only those included on the roll chart,
must be individually moved through their entire range and then returned to the position
originally indicated on the roll chart. Please note that each switch has three position, down,
center and up. Therefore, if a switch is in the center position, it should be moved up and then
down, stopping for an instant in each position and finally returned to the original position.
Only those included on the roll chart. Well, if it's in a center position, it's not included on
the roll chart. As a further example, if the switch were originally in the down position,
the lever would be thrown to the center, then to the up and then back to its original down position.
If the neon short indicator lights in any position, the tube has leakage or shorted,
do not move levers in bold type. So the levers in bold type are underlined on this little list I
have. If a tube reads in the replace region, it has low emission, should be replaced. If it reads
in the weak region, it is questionable, but probably operative. If it reads in the good
region, the tube has proper emission. The zero to a thousand skeleton meter is for tube matching.
Pilot lights may be tested by selecting the proper filament voltage on the filament switch
and inserting the pilot light into the center. You will note that several of the numbers on
the roll chart are in bold type. These correspond to the levers which are connected to the tube
filaments. Move each of the levers in bold print one at a time to the up position and back to the
original position. The neon bulb short indicator will light in the up position if the filaments
are intact. Yeah, we can't do that. It told us not to move them. It's telling you how to check,
how to figure out new tubes, and you can write it down in the list. We're not going to do that.
Let's get the schematics. Okay, we're all good. All right, so basically we do both tests
and go from there. So three, three, one. Only up levers in light type may be moved for open
element test. Levers in bold type are underlined in the supplement, may not be moved while the
short merit push button is pressed down. Okay, yeah. So if the merit is not pushed down,
you can move it. So if I were to move number one, that's going to tell me that it's shorted.
Yes, so our light works. Okay, one's down. So I did two, one. Now we need to do three,
one. So we need to turn two off. We'll run it through its lineup to make sure it's fine.
And I need to turn three up. There was a momentary short, but I think it's fine.
Okay, and so now we're going to test this. This is the second test. Also good. Okay, so the 80
that was in it appears to actually be a pretty good tube. So that's cool. Let's test this old,
one we got here just for giggles. So we've got one down and three up. Okay,
we'll let it warm up and then we'll try our line adjustment. I could see going through and like
doing just a bunch of these, if they were the same number, just to know what to toss. Like that,
that RCA we checked really, I mean, it said it was good, but it really wasn't that great. I guess
if it's a rectifier, it doesn't have to be great as long as it's working. The line adjustment
doesn't need much change usually it looks like. Okay, first test. That's a good one. Alrighty.
So let me turn three off and two on. This is the second test. Also a good one. Okay, so we've got
a good G, we've got a good 80. I'm going to set it to the side and we'll move on to the next tube.
All right, so next up are 27s. So there were three in it. One of them is one of these blue
ones that I've been told is actually pretty expensive. So we're probably going to save that
one. We'll go ahead and we'll go ahead and swap in a cheapo. So I've set it up how the book tells me
27 should be set up. This one is selector number two. Two and three should be up. Four and five
should be down. Okay, but then we have to move this over to line adjustment. Okay, there's no
short on that. We're back to the selection two. I cannot see the freaking filament to save my life.
There's only one test on these. So let's see. Oh no, it's a weakie.
That's a pretty bad tube there, folks. So let's see what it is. National Union and like we saw
earlier, number 27. Okay, so that one apparently is pretty bad. This is a Cunningham Radiotron
27. From what I understand, these were the original tubes. The Cunninghams were the original
ones that shipped with that water canister. Is that an original tube from the set? I don't know.
That would seem crazy, but maybe. I mean, if you think about it, I guess it's not that crazy
because that tube is absolutely as old as that set. Why can't it be the tube that was in that
set? It was in some set. We found it in this one. Okay, I think I've got to do this line adjust each
time because I need to watch for the short. Okay, I didn't get a short. The line appears to be
adjusted properly. Let's see if this one's any better. This is not doing a damn thing. So yeah,
I might have connection problems or that socket might not work right or might be I need to clean
up the legs. Or it could be they're both dead. You know, the one's almost dead and this one's
I'm letting it sit a little bit just to make sure it gets some filament juice.
Yeah, it is giving me nothing. Okay, let me mess with that a little bit and try some other ones.
Well, unfortunately, I only have one other 27 that's not in something. I'm not going to pull
tubes out of the radio. I'm going to order up other ones. I've got one other 27
and it's also pretty freaking weak. So we're at 200 on it. So that one will give us a reading
of 200. This first one was giving us something similar. Let's see if it'll still do that.
And the pins on the other two look pretty good. Actually, I've got a ton of 80s. I've got several
45s. I've got all kinds of different ones, but I've only got 127. So that's that first one that
was actually in it. It's kind of junky too. I mean, I would call that 170. So those two actually
do work though. This is the next one we tried. It appears to be completely stone cold dead.
And unfortunately, the colored one seems to be dead too. What I'll do is I'll keep the colored
one for sure. I cannot tell that we're getting filament glow though. I'll keep the colored one
for sure. And we'll try just swapping it in the radio. Yeah. So this one, it just will not read.
It's dead as hell. And you can see the legs are not bad. They're fine. Same here. Yeah. I'll keep
them. If they test bad, I'll keep them and just try them in the radio just to confirm that they're
bad. But I mean, if they won't work here, they're probably not going to work in the radio. I hate
to throw away a real cool one like that though. Yeah. They're both dead. I'll bet if I check the
filaments open on both of them. All right. So I checked the good, well, not good, but the ones
that we'll even measure. And these are the two filament lines. They're basically connected
because it's just a heater wire in there. These two, the filament is connected. This, the filament
is open. That one, the filament is connected, but it won't do a damn thing. So it's just something
else is worn out in it. Okay. So I got to get some number 27 tubes. All right. So I hopped on eBay
and I bought a whole bunch of 27s, got them coming. They weren't too bad. You can get them tested
strong or 80% or better. You can get a bunch of them tested for like five bucks each,
between five and $10 each. So I ordered about eight of them. So whenever they come in,
we'll see how that goes. What I like to do on things like that is I love to get a big lot of
them. Cause you know, you get them a little cheaper or, um, if I'm, you know, we're ordering
something used. We're not sure, you know, the guy says he tested them and he has numbers and
everything, but maybe one gets here and it's broke. So I would never order three of them
because I need three of them. So if, if, um, they show up and one of them's bad, I'm screwed.
Right. So I ordered like eight of them. Um, and I ordered them from three different people.
So if this guy's a crook that maybe this guy will be all right. Um, there is actually a, um,
ham fest coming to Charlotte, um, in like two weeks. So I might go out there and get some more
stuff. I've got some, I've got some stuff I want to pick up. Um, I've got several items that I'm
looking for. Um, there was a ham fest last week in Charlotte, but it was, it was actually in Concord
up above Charlotte. I didn't go up there. Cause to be honest, it's a heck of a drive. It's like
45, 50 minutes to get from South Charlotte to North Charlotte up in that area where that was,
it just wasn't worth all the trouble. And I had to go to work after that.
So I didn't want to drive up there. It would be two hours of driving pretty much
before work, you know, so I would have had to get up pretty early to do it. So heck no,
but the one that's coming up in like two weeks is at the airport. So it's a lot closer. So it's
only about maybe 20 minute drive. Um, and it's down kind of more the way that I'm usually at.
Anyway, I'm not all out of bounds. You know what I mean? Uh, so what I'm looking for is I've got
two speakers for this cabinet, but I've actually got three of these that need that same speaker.
Um, and the two speakers I've got, one of them is all screwed up. We're going to fix it. But,
and then the other one, it's pretty good, but it's got a hole in it. Um, we'll talk about that
whenever we do this speaker video. Um, but I wouldn't mind picking up another one of those
speakers, um, and get it local so I wouldn't have to ship it. I've also, I've got an Atwater Kent,
um, 36, which is the, the old school, um, table, you know, the long kind of
case ones. Well, it kind of looks like this. Um, and that particular model,
model 36 had a separate power supply and a separate speaker. So I've got the box,
I've got the receiver. I just don't have the power supply or the speaker.
So I would like to pick those up too. So I'm going to look for those up at the, uh,
up at the ham fest. Now the, the, uh, stuff like these tubes, I'm sure I could pick up there too.
There's, I'm also looking for one knob. I have one knob for a silver tone,
not this silver tone, but a similar one that I've got a battery set, um, that I've been looking for
some parts, mainly the knobs for. And I found one, ordered it, but then when it got here,
it's slightly too big. It's the wrong, um, basically it's supposed to be like an inch
and a quarter. And they also made one that's like an inch and a half or something like that.
And it's the bigger one instead of the smaller one. I didn't realize there were two different
ones. And if you'll notice, look at this, that one's missing. It's broke all the crap. This
was broken to a million pieces. Yeah, buddy found that on eBay the other day, 10 bucks shipped.
Have you ever seen anything more worth $10 than the exact radio knob that you need? Perfect. Um,
okay, so let's try this one. So I got the 27s coming. So this is the 24a and it does use the
little thing. Now, if you look on the list here and by the way, 24a, I wonder why they don't list
any of the ones that are 24s, but I guess they would test the same. So the shunt is 32 voltage,
filament voltage, 2.5 selection is numbered. Selector is number two, two, three, and 10 are
up four and five are down now, 10. Remember it said nine and 10 were the wires. Um, so it always
uses 10 and it even says it there. And, um, like I was mentioning, I guess all of those probably
don't have four posts. They have five posts. So it always goes in that right socket. So that,
that lead just barely fits on it. It's perfect. It's like it was supposed to be like that.
All right, so let's do our line thing. Let's see what we got. Come on, baby. Do me right now. Come
on, baby. Oh, hell that ain't good. That's pretty weak there, buddy. 280. Well, all right, let's try
another one. So this one was a Cunningham. I mean, it could have been the original one,
one of the original ones. And you know, these are in those cans a little harder to get out.
I don't know. I'm just saying this is also a Cunningham kind of in the same place, a little
worse than the last one, actually. Yep. Yep. Yep. I see what's going on here. This thing's worn.
Slap that hell out. So this one is a General Electric. So it was swapped in at some point.
All three of these are just weak as crap. You know, really though, now I'm starting to not
trust the tester because, yeah, it tested the rectifier good, but we all know that those always
test good and they always go nuts on the needle. So, you know, I'd like to get one strong one that
tests pretty good. Of course, I haven't thrown any of them away or anything. All right. So I
think I do have a ton of 24A. So let me pull out some and I'll try a bunch of them, just see if I
can get any of them that test good. Well, I tested two more and they both kind of were similar. And
this one was actually over in here, is one of Bob's tubes. I cleaned up the legs on it. He
actually has a piece of sandpaper down in here. Cleaned up the legs on it. And Bob, unfortunately,
it's dead as a doorknob. So I think that one probably has the filament broken. All right.
So I've been doing several of them. They're all coming up the same. But to be honest, I may have
gotten all of those from Bob, actually. I got a bunch of tubes with it. This one is actually marked
good. And it just says 24. It doesn't say 24A, but maybe they were all 24As. I don't know.
And it's because it's just on a sticker. It's not, you can't see their markings anymore.
And it says good. So let's see if this is maybe from a different, it's certainly a different brand.
So we'll see if maybe if this is a, give us something a little better. Nope. Hmm. Yeah,
I might have a, we may just have an issue where it cannot, or I'm doing something wrong. I don't
think I am. I just, you know, I've had this problem before where I just don't have any damn tubes that
test good. Maybe they're just all half-ass burnout. I've got some ordered that they're
giving me specific numbers on. I can check and see if, if on the 27s, I can check and see if they
measure similar to what I've been told that they're testing. So we'll see.
We may have to do a whole video where we calibrate this. All right. So I've got tons
So I just grabbed a new old stock 12AX4. Brand new. So let's test it to see if this,
if we've got a problem with this machine or not. I guess not.
Yeah. So I don't know. I mean, it's a different socket, but, and a different filament voltage
and everything, but I mean, clearly it's capable of testing a good tube.
Yeah. I think I just got a bunch of bad old tubes. We'll wait for the new ones to come in
and check. So I checked like 10 different 24As and all of them were giving me results between 200
and 300. All 10 of them. So you would think, well, there's no way in hell all of them are
bad kind of in the same way. I did have one that had no reading. But I got, I think I got most of
them from the same place. So it could have been that was their stash of stuff that was weak and
they just didn't want to, didn't have the heart throw them out yet or something. And again, I got
them from a gentleman that passed away. So it's not like somebody sold me a bunch of them and
tried to screw me over. It was just the guy's stuff that he had in his, in his radio shack.
And I just went around the room and got everything that I could use and clean the place out for his
son. So it could just be that every one of those just is pretty much slap worn out. So I'm probably
going to buy some 24As too that have been tested online and then get them in and compare them to
what I get on this. But I mean, my tester is working best I can tell. Right? It's capable
of telling you that a tube's good. That's a good looking tube to me, you know. Okay. So now we
need to mess with the 45s. Boy, we know that's going to be fun. Money, money, money, money.
All right. So this is just a random 45 that I had laying around. I actually have several, but again,
let's see what we got here. This is not the one that was in it. And one was missing from it.
In the very first video, we figured that out. Ooh, there we go. Yeah, I'll take it.
Look, folks, might as well be a mile. Oh, look how good. For me, that's really good,
folks. Oh, hell, look at that. It's green as hell. It's like St. Patrick's Day here.
I think all this video is going to come, well, I think, let me think because I know the video
is coming out this weekend. That's St. Patrick's Day. So no, this will be the week after St.
Patrick's Day, but this will probably be the week before the ham fest. All right. So I got
145 there. That's at least passable. Let me see what the one that was in the radio test is. So
this is the one that was in it, but it's a Cunningham. It very well may be the original
tube. She's hanging in there, but it's probably not going to be great. Yeah. Maybe they just
played the hell out of this thing. Maybe they just worn it slap out. It may have still worked.
Well, the cord was all screwed up. I don't ever plug in the old ones. I know a lot of people
freak out about that. Oh, don't plug it in. You'll burn everything up. And maybe you will, but
um, I just, uh, I know I'm going to go all the way through it. So I don't, I don't plug
them in. Usually I don't, I don't, um, I don't really care if they work as a matter of fact,
because I do this channel, I'd probably prefer that they didn't work since I'm going to go all
the way through it. Anyway, we run into that same thing with like the arcade games and pinball
machines on the other channel. I'd rat, I would much rather buy a pinball machine that doesn't
work because I'm going to have to go all the way through it anyway and fix everything and touch
everything and inspect everything. So it might as well be broke. And then you fix it as you go.
And plus you get it a lot cheaper that way. So like this radio, I don't remember what I paid for
it, but it couldn't have been more than 50 bucks. There's no way, you know, and if you're watching
this, this far into the video, you're probably old radio guys and girls. And so, you know,
I'm telling the truth about it. You can pick up old radios really cheap. Um, cause people just
don't want to put the time into them just to get am stations that are dwindling away. But I really
like them. I think they're cool. Okay. So let me, uh, test a couple more 45s and see if I can find
some more that are strong. You know how people say, and that's just my luck. Well, I've always
thought that I have pretty good luck, right? So this is an RCA, which is kind of what I want,
right? It's been laying around forever. Who knows where it came from? Wham. Look at that.
It's like a grand slam. That's pretty good for, for what I'm messing with here.
Yeah, that's a good one. We can roll with that. Um, so that's one. And then the other one was
good enough. Uh, you know, so maybe I won't have to order a new 45. Let me see if I can find
another one. That's similar. That's when I was a sticker that says for use in last audio stage
only. And the old timer said it was good. And he's right. You know, that one's almost exactly
where that other RCA was the mighty majestic with the G that they put in front of all of their
numbers. That's why I was calling it a G 80 earlier because the first, um, console I did
was a majestic. Ooh, fancy. Majestic made some good stuff. Uh, uh, Grig, is it Grigsby Grum,
Grunau? Grigsby Grunau majestic. Good stuff. Um, okay. So I think that one, and I had another one
that was pretty strong. Maybe those two should go in there. All right. So I ordered some tested
strong tubes online, and I'm pretty sure that the guy's legit. He's got great feedback, blah,
blah, blah. Right. So this is a 27, a Sylvania 27. And I think something's going on with my meter.
Um, a few of these apparently are even new old stock. So maybe we'll try one of the new old
stock ones and, uh, just make sure. Okay. Yeah. So I can't get a good reading on it on the 27.
So there's something going on with this, with this meter or something. I've got some resistors
burn up in it, or that socket is screwed up or something. Um, like I said, I, or like you saw,
I tested a, like a compactron or something and it tested fine. So, but that's a different socket
and different resistors likely. Um, so I'm just going to put, I've got a Cunningham here and two
RCAs. I'm gonna put them in it. They're tested working by a guy who like, you know, has thousands
of tubes on eBay. Um, you know, perfect feedback. I'm sure the guy's fine. Um, so that's the 27.
Let's see if I can find a 24 that actually tests right. Okay. So this is an actual new old stock
tongue sole, which isn't the greatest, but it is new old stock. And I do get a slightly higher
reading. Uh, so three 30 or something like that. All right. So, um, I think probably most of the
ones we tested are fine, but curiosity is killing me. I'm going to go ahead and take it apart and
see if, uh, there's something pertaining to that particular socket where there's a resistor or
something screwed up. I've got the schematics here. Maybe we can look at it real quick. Okay.
So here are the schematics. Now we are doing test number two, which is running off that R5
resistor there. So R5 should be a 510 Ohm resistor. So I've cut it loose here. 510 Ohm
resistor. But when you check it, come on, come on. That's right. So 1.24. So it's 1240. So it's
way out of tolerance. Um, so we need to replace that one for sure. So that's probably the whole
problem. It would be interesting to see the tube that I checked. What test did it use? I'll bet it
didn't use number two, it used number three or, or something else. Okay. So I'll just show you
how everything's kind of constructed. There's my new resistor. The wattage is much higher, but
Hey, maybe it'll burn up less. All the other ones are slightly high. Cause I guess that's
just what carbon resistors do. Oh, the new one, um, uh, measures, what was it supposed to be?
510 I think. Yeah. 510. It's supposed to be 510. It measures 524. So it's really close.
And you know, it's a 5% resistor. So that's well within tolerance. The other ones are like
six and 7% off and they were originally 5% resistors, but that's so close. I'm not going
to worry about it. Um, everything else is made pretty well. So there's these big selector switches
with big old heavy freaking contacts. Um, doesn't seem to be the problem. There's this huge freaking
rheostat up here. It doesn't seem to be the problem. There's one capacitor in the whole
thing, but it connects to the short lamp. So who cares? There is a tube here, which I,
is probably just, is that a rectifier? Let's see if it shows. I don't completely know what that is,
but, um, I don't have any way to test it because my tube tester is not working right. And I would
need it for the tube tester to work. I don't know what that is. I think it's another resistor.
I tested all of these, um, and everything's cool. So I'm going to look at the two, I'm going to
watch the video back and look at the two tubes that I tested that worked fine. So the G80,
I call it a G80, the Majestic radios, they put a G in front of all of them. So the 80 rectifier,
and then that Compactron that I tested, I want to see what the test number was.
Because this selector switch, you are picking a different resistor, basically,
whenever you pick a different, um, selection. So I'll bet it wasn't two. It was either one,
or three, or four. Three and four, it looks like, are the same thing. Um, oh no, three and four are
the same thing on this, but up here they'll be different. Yeah, there's different resistors.
But I've checked all those resistors. They're all within tolerance or very close. So good
enough for me. Um, and plus, uh, you know, our voltage is, our line voltage is slightly higher.
So a slightly higher resistor is probably right, right? It probably don't work like that,
but we'll say it does. Um, even this one, this one's like dead on the money. Um, so yeah,
let me watch the tape back and then we'll try another one and see if that fixed our issue.
Okay, so I couldn't remember what the other, um, tube I tested was. So I looked at the video,
it was a 12AX4, which is selection number three. The 80 was selection number three,
and the 45s were selection number three. So all the tubes that I got a good reading on,
uh, were selection number three. Now the 45s did test kind of weak, you know, they were just barely
in the green, but it's the output tube. They get blasted, you know, they're also valuable. So it's
hard to find really good ones. So, um, this is test number two. So we'll see. And that was the
one that had the resistor screwed up. So we'll see. Let's try this again, shall we? So I just
grabbed one of the ones that I just tested that gave me the crappy reading. Same exact tubes.
We've got it on number two. Let's do our line check. Good enough for me. Test number two.
Let's see what we can get. Yep. That was it. So the whole scale was just off because the,
the voltage was reduced too far because it had the wrong resistor in it.
That's probably a correct reading there. Uh, let's try this new old stock one. New old stock
tongue and soul. Yep. Okay. Yeah. We're where we need to be now. So I need to check them for shorts
and stuff, but that's cool. All right. So I'm going to do it really quickly, but I want to,
I want to check the tubes that were actually in the machine and see if, um, if I haven't gotten
them all mixed up and just see if any of those are stable. I've got them over here on the side.
Okay. This is the first 24A that was in it. It's a Cunningham. It is just fine. So I'm going to put
it right back where she goes. So this is the second 24A that was in it. It's also a Cunningham.
Yep. Just fine. It's reading as good as the new old stock tongue and soul. So very cool. So I'm
going to put it right back in the radio. Okay. Here's the third one, 24A that was in it. This
is a General Electric. It's a little bit weaker than the other ones, but still nice and strong.
However, um, the original ones were these Cunninghams or RCA's and I just happened to have
a couple sitting here. So I think I'm going to try one of these and then swap it in if we get
one that tests well. Okay. So this is a very clean Cunningham, just like the other ones. And
like I said, these are very cheap. I paid like $3 apiece for these. Yeah. All right. So we got
three good 24As now. Hell yeah. Okay. So let's try the 27s. So this is the national one, which
was one of the originals. It's fine. You know, not, not great, but it's, um, still passable.
This is a Cunningham that I believe was in there.
That's good enough, I guess. Um, and then remember the other one was that blue one
and the filament is open on it. So it doesn't work. All right. So I had two, uh, RCA's that
tested well. And then, uh, I had another RCA, but it's a little bit, it's more like 600.
Um, so this one's much stronger and kind of in the same range as the other two. It's a
Sylvania. So I'm going to put it in. So everything in it is an RCA except for the Sylvania, but
that's cool. So with that, we have our tube compliment done. Heck yeah. I think we've got
every, all the tubes we need. So, um, I think we'll leave it there. Long video, but I finally
figured out what's going on with my freaking, uh, tube tester. One bad resistor. Now, you know,
I usually use the other one, so I'm probably going to take it apart and check the resistors
in it pretty soon too. But we'll do that on another video. For our next video, we're finally
going to do it. We're going to work on the speaker. That's right. And we've had some people ask,
why can't you use just a modern speaker? It's because the old ones had a field coil on it.
So there's an extra coil that's part of the power supply. That's actually inside the speaker
mounted in the cone of the, or the, the back of the speaker. So it's a special speaker and I've
got two of them. We'll check them all out and do some repair on it and see what we can do. And,
uh, once all of that is done, we'll finally be ready to test the thing and see if it'll actually
work. So we'll do that on the next, or we'll work on the speakers on the next video and
we will see you then. I hope you enjoyed it.
