How to Build a Youth Recurve Bow out of Flattened PVC Pipe

Unraveling the Ancient Longbow
4 followers
23 Video Views·Mar 20, 2026
AI Generated·May contain errors
Hey everybody! Today I'm going to show you how to make a simple youth target bow.
Just something really simple. What you're going to need is you're going to need a
four foot long three quarter inch inner diameter schedule 40 pvc pipe. And I like using the
white plumbing pipe for this one. So what you want to do is you want to mark the seven
and then you want to measure and mark two inches away from the center
in either direction. And then on the ends you want to measure in six inches.
If you can see that. So this bow work building is going to be a youth recurve. Just really simple
nothing fancy. So other things you're going to need you're going to need a flattening jig
which I show in my video how to do.
And then you're going to need a heat source. I like using this heat gun. You can use a stove top.
And you're also going to need a pot or other similarly cylindrical object that's about six
to eight inches in diameter. It doesn't really matter what you use. You could use anything.
I like using the pot. All right so let's get started. So what you want to do to heat this up
is to take your heat gun and just run it back and forth while moving the pipe in quarter turns.
You could also do this on top of a stove top and I show how to do that in my
PVC horse bow video. So we'll get started. So what you want to do is once your pipe gets flexible
so it's doing that you want to heat it up just a little bit more.
And while you're doing your final keep you want to just make sure that it's perfectly straight.
And then what you want to do is you want to throw the flattening jig right on top of it
and then apply weight. So you want to apply your weight to right about the middle of the limb.
Now you're just going to let it sit for a little bit. After a little while it's going to get cool
and it's going to harden up. So what you can do is you can move it a little bit to a different
patch of ground which will be cooler. All right you pop this off and there you see we've got the
nice taper there. But if it starts returning like that did right in the front there on the tip
just apply pressure again because you want it to mainly cool down under here but you still want it
to be a little pliable so you can straighten it out if there are any kinks. Now that it's
nice and straight with a good taper you want to just sight down it make sure it's straight.
It looks nice and straight. Okay good. So now I've just got to do the other side.
Okay so now that both limbs are flattened and the bow is coming together what you want to do
is you want to heat up the handle so we can make it more comfortable to grip. And so another thing
we're going to do is if you see here there's this hard crease that came from our flattening jig.
So what we're going to do is we're going to heat it up until this puffs out and that's going to be
an indicator of when this handle is soft enough to flex. So we're going to turn on the heat gun
and you just want to kind of turn the bowl over rapidly like this. You don't keep it in one spot
too long. But you do kind of want to concentrate a little bit on these sections right here. Okay
so now that you see that the handle is not only very flexible but the creases are gone. So what
you want to do is you want to cut the heat then you want to take your hand cover it in a towel or
potholder and then what you want to do is you want to just flatten it like this. So if you can see
you just want to flatten it. Not too much but just enough so it becomes comfortable for somebody to
hold. And then now what you want to do is once this is about there you want to sight down and
make sure that it's straight across so that you know you don't want it to be crooked. Especially
because we're going to be putting a recurve in the tips. And then what you want to do is you want
to set it down and just reinforce that right there. Let it sit for a little bit. Occasionally
pick it up and make sure that it's straight. Other than that you want to just set it down
because what will happen is the limbs will go back just a little bit to give you a little bit
of reflex. I mean a deflex in the handle. That's going to make it a little smoother to shoot
and it's also going to compensate for the recurve we're going to be putting in.
So once this is set that's it. There's your handle. Now we're going to work on the tips.
All right so now we're going to heat flex in our recurves here. So what we're going to do
is we're going to just gently heat this over the heat gun. Not until it starts puffing up but just
till it's soft enough to bend. And then what we're going to do is we're going to move the heat gun
out of the way and then we're going to take a towel and hold it against the putt. Flex it
to this line so we get a nice curve around the putt. All right I'll show you what that looks like.
So now you see you want to heat the whole thing.
Take your putt and then you want to press this into the putt and you want to stop
at that black line here. So you can see how this is bent. Well it's still a little warm
so this is what it's going to look like. So while it's still a little warm you just want to look
down and make sure that it's straight with the rest of the bow. Right now it's in line. So now
you just repeat that on the other side. All right so now that you've recurved your tips you want to
cut knots into this. So you could do a variety of things. You could cut v notches in the sides.
What we're going to be doing today is that we're actually going to cut
two quarter inch squares out of each corner and turn this into a pin.
So once you've marked that what you want to do is you want to cut it out.
So this will become your knot and your string will actually rest on top of this
and it'll come all the way around. Now if you're making a bunch of these for a group of kids what
you can do to save on time is you can actually just drill a hole in the top here. That way when
you're stringing up these bows you just tie a knot in your length of string run it through to
the other side pull it tight until the bow is braced and then tie a knot on the other side.
And so especially for kids you know if all you want is a is a nice little shootable bow
then you can even just leave these strung permanently. So now we're going to go string
this up and I'll show you what that looks like. All right so now that the bow is all finished
we just got to string it up. So what you want to do is you just want to take your string
put it on the bottom right here run it up in there bring this against your
shoulder tuck the handle into the back of your knee and then push the top limb in slip the top
loop on and step out of the bow. So here it is. So here's the finished youth bow. Now you'll notice
one side is bending more than the other side that's bending a little more will be the top
so now that we know which limb is top you just hold it here along this line
so that's it and it's a lighter weight bow you know I'd say 30-35 pounds
and you know this was great for kids and youth and another great thing about it is that it's
it's a really tough bow you know you can you know it can it can take a little bit of abuse
so here it is and you know make one or a couple dozen and enjoy. Thank you for watching my video
