Archery Tips: How To Assemble Your Recurve Bow

LEARN ARCHERY
7 followers
16 Video Views·Sep 18, 2025
Hey archery friends, this is Coach Tara. Today I'm going to show you how to repair
your arrows. It's super frustrating when you go to the archery range and you break a knock,
you lose a point in the target mat, or even worse your fletching starts to come off your arrows.
The good news is that you don't have to go run to the archery shop and buy a whole new set of
arrows. You can actually run home and with the right materials you can replace everything on
your arrow and make it as good as new. So sometimes you'll go to the range and your
knock is going to look like this. So we have to take this one off and we have to place a new one
on. How do you do that? So you're just going to grab a pair of pliers. I use the knocking pliers.
Same knocking pliers are used for everything else in archery. And you're just going to gently
squeeze onto the broken knock and you're just going to kind of shimmy it just a little bit there
and it's going to come right off. What you want to be careful of is you don't want to
press too hard onto the knock when you're trying to take it off because
if you're not gentle enough this is going to happen and it's going to damage the arrow.
So you're just going to slightly squeeze it and just kind of shake it off. All right so now we're
ready to put the new knock on. Probably the trickiest part is figuring out the right knock size.
Because I teach a lot of beginner classes I order all types of knock sizes because I have all
different types of shaft sizes. There can be knocks that are too big or too small so you got
to make sure you get the right knock size. If the knock is too big you will know because the
knock is going to fit completely over the silver part of this arrow. It's going to cover it all.
All right if it's too small when you place it on the arrow you're going to see a ton of the silver
hanging out. Way too much silver. It's not fitting on there correctly. The perfect arrow when you
place it on you're going to see a little bit just a little bit of that silver is going to be sticking
out. You see that just like that this is what you're looking for. All right once you find the
correct knock size and you're ready to place it on your arrow all you're going to do is take some
super glue. You're going to put a few dots of the super glue inside the knock and you're going to
place it on the arrow shaft. Now be very careful when you do this because it dries pretty quickly.
You want to make sure that you line it up. So with recurve archery we always have the index
fletching facing in towards us and the string is going to be right here. So you want that
knock to fit right into the string. So it's going to look just like this. If you're a compound
shooter typically your index fletching is upward and so you're going to turn that knock sideways
so that way it can fit in the string correctly. So just make sure before it dries that you have
that lined up nice and good. And really that's all there is to it. That's a really easy fix
when replacing a knock. There are other types of arrows with different types of knocks.
So you also have this type. This is an insert. Okay so see how this one comes off. This one's
not going to fit on the outside and you have to glue it on. This one you just stick inside.
So you're just going to take the knock stick it inside and same thing this one's easy because
this one can rotate and you can change where the fletching the knock lines up with the fletching.
So that makes it nice and easy. Just be careful if it's an insert like this that's broken off
and you need to replace it. If you come right at it and you start moving it in different directions
that insert is going to get stuck. And so you're just going to place the knock on there and just
kind of shimmy it out just like that. So that way the whole insert comes out. They're going to be
pretty snug. So it comes with a tool. Place it in the little tool here and then you're just going to
like screw it in. All right and that's how you repair the knock.
How do you place the point in the shaft of the arrow? Super easy. The biggest thing you want to
make sure is when you order the points make sure they match the shaft size of the arrow. So for
example these are 1916 shafts. I need 1916 points. What I'm going to do is I'm going to take the
point. I'm just going to place it right in here but you are going to have the insert right here
sticking out and that's because this is the part that we're going to heat up and glue to stick
inside the shaft. So all you're going to need is a propane torch. All right so just make sure you
turn that on and face it away from you. You're going to heat it up. Heat up nice and good.
All right then you're going to take your tip glue and I'll put some links to different tip
glue that I use. Get that glue on there really good because you don't want it to fall out
when you are shooting your arrow and it gets stuck in the target mat at the archer range.
And then you're just going to stick it right here inside the shaft.
Now sometimes if you get too much glue on there some glue will be sticking out
and you don't want that. So all you're going to do is take an old rag and just kind of wipe that down.
All right and then if you're working at a workbench or yeah I usually use a piece of
cardboard or if I'm at a workbench I use that. I just kind of push it in. Make sure it's nice
and firm nice and tight against it while it's drying to make sure that tip's in there really
good. And then get your arrows all ready to go. I give it a few minutes let it dry for about 10
minutes or so and you're ready to shoot it. Now we're ready to head back inside. I'm going to
take you to my fletching station. If you notice right here these are from my archery classes.
Fletchings are off so I'm going to show you how to get those fletchings off really good,
how to clean the arrow, and how to get them refletched. All right so let's go inside.
The first thing that we're going to do is we're going to go through all the arrows and we're
going to make sure that we get the arrow all the fletching off the arrows. So I have a lot of arrows
that have parts and pieces still stuck onto it. So the first thing you're going to do
is you're just going to take, I use this blade here, you can use a knife, whatever you want to
use, and then you're just going to move away from you and you're just going to get that top layer
off all that fletching. You don't want to dig into the arrow because we don't obviously want to
ruin the arrow. So you're just going to kind of more stay on the surface and get as much of that
residue glue fletching off the arrow as you can. So if you guys can see right here just that glue is
just coming off nice and easily. Now if all the arrows are bad I'll just start fresh,
but in a case like this I don't want to re-fletch all the arrows. So this one for example I'm just
going to re-fletch the one fletching. I'm going to take some acetone, I'm going to place it on
this cloth. All right and then I'm just going to clean the part of the shaft
and I'm going to re-fletch. Now the biggest part is once you clean this area you have to remember
that you don't want any oil on there. So you want to be really careful that you're not touching that
area with your fingers once you clean the area. I have this jig right here it's called the Joe Jam.
It's a six arrow fletching jig which is nice. I actually have three of them and that helps it
to go faster because I have tons of arrows so I can do 18 arrows at a time when I'm fletching.
But if it's just for you and you're trying to fix your own arrows you don't need something this big.
You can go on Amazon and they have single size fletching jigs. So I used to use the Bits and
I'll look on there and see what are some other brands that would be good to use and I'll post
them in the link below so that way you can see those. The first thing that you're going to need
to make sure that you're doing is that you're lining it up correctly. So when you have a jig
like this you're going to see down here there's these little circles and there's like little bars
in them. Those bars are for you to put in put the knock in. All right so it's going to kind of set
the arrow up for you. So let's do this one right here. All right and what I always do is I always
start with the index fletching the odd fletching the one that's different and I want to make sure
it's facing up towards me. Okay so let me to make sure you have the index fletching facing towards
you. Oh I'm touching the arrow. This is going to be horizontal. Okay so I see it's horizontal in
there so I'm going to set the knock in there and I have my white index fletching facing upward.
So all you're going to do these actually click into place so I'm just going to do one rotation
of a click. I want to hear it click. That's how I know that it's ready for the next fletching.
All right so now I'm ready to put the fletching on. I know that I need to use orange for this
one. For this one I have one white as my index fletching and I have two orange.
So then the next thing that you have to do and purchase is you're going to need
um you're going to need either veins, feathers, whatever your fletching choice is.
Make sure that you are careful what size that you buy. If you already have arrows fletched and then
you go and order new fletchings they come in a lot of different lengths so you need to make sure
that you are getting the same style. And just to kind of show you because I have two different sizes
see how I have one smaller one longer. So make sure that when you're fletching grab the right
size. All right so now I'm ready. So kind of the way I run on a production line is I line all my
arrows up and then I put my colors depending on what I need for each one. You get your clamp. This
is the clamp that clamps everything up all the fletchings onto the arrows and what I like to do
is I like to mark my clamp. So like right here I have a mark so that way I'm always fletching in
the exact same spot. Now what you can always do just because I have archery classes and I have
some arrows from long ago sometimes I have Lancaster fletch them sometimes I fletch them.
You always want to do just a quick double check. You're just going to lay it into your fletching
jig and just make sure it lines up when you put the fletching in there just to make sure double
check. Okay so what I'm going to go ahead and do and do your best try not to touch the inside of
this fletching right here because I'm going to line that fletching that fletching right inside
the jig so it's going to look just like this and then I'm going to lay it in there and I'm going
to make sure it lines up. Now that was off just a little bit so I'm going to pull this down
stick it back in there. All right now that's lining up really good. So now I'm ready to take my
my glue and there's kind of a couple different ways you can do it. You can use a facet glue
which is what I typically use but I'm out right now so all I'm going to use for the purpose of
this video is this it's called fletch tight. When you're using the fletch tight you want to make
sure it's like a runny watery liquidy consistency because if it's gooey it's not going to work as
well they're not going to stick to the arrow they're going to fletchings are going to start
to come off. We're going to make a nice single line it's going to come right down here
right on top of there. You're just going to lay it right down in the groove here
and you're going to let it sit for about 15 minutes. You can take your arrow out of the jig
and now you have an arrow that's all ready to shoot. I hope this helps you today learn how to
insert tips how to replace your nock and now you know how to fletch your arrow.
Have a great day and happy shooting!
