How to build a recurve bow | SWR Craftsmanship

Unraveling the Ancient Longbow
4 followers
47 Video Views·Oct 18, 2025
A piece of wood is being refined here.
With saw, sandpaper and water vapor.
An elegant recurve bow is being shaped from a seemingly simple splinter.
A recurve bow is always the highlight of self-constructions.
In our case we had a movable recurve, also called a working recurve.
The recurve principle also contributes to the movement.
This is a step more difficult and demanding,
because this movement has to fit perfectly.
If the bow is twisted, it is a big challenge.
You can't make a mistake.
Horst Perck is at home in Weibern in the Eifel
and has been building bows in a traditional way for years.
The carpenter makes self-bows.
Bows made from a single piece of wood.
We are here in my wood warehouse.
There are different bow recurve bows from different woods,
which are well suited for bow construction.
Here are Eiben recurve bows, Robinian recurve bows,
Orsich Orange recurve bows, Esche recurve bows and other woods.
For today's project we need a nice Orsich bow,
which is suitable for a recurve bow.
I'm looking for a nice one.
A speciality of Horst Perck.
He likes to work with character.
He likes to work with branches and twists.
I get the wood from my own harvest.
I cut and split many trees myself.
I like it best when I get fresh wood.
Then I split it, halve it or quarter it.
Or if there are thicker trunks,
I work out a larger number of splits.
Then they are stored in the wood warehouse for months or years.
Horst Perck chooses Orsich Orange, the perfect wood
for a so-called recurve bow.
Today we want to build a recurve bow
from Orsich Orange.
This is what it could look like when it's finished.
You can already see a large branch hole here,
which is integrated in the middle of the bow.
Later we will put on the bow design and work it out.
First, we reduce the orange a little in width
and in height, so that it becomes a little more handy.
Then we have to remove the light splinter wood completely.
The bow always needs a strong splinter wood component.
We have it here.
We have to remove this material until we are at this height.
The shape of the bow is worked out layer by layer.
With the drawknife, he carries one annual ring after the other
and always follows the course of the wood fiber.
In this phase, the rawling gets its first rough shape.
Horst Perk gets to know the peculiarities of the wood
and releases its structure.
A job over hours.
The carpenter gets closer and closer to the annual ring
that he wants to leave standing.
Little by little, the wood then reveals its secrets.
In any case, there is always something to suggest.
For example, this little branch was not so clear at the beginning
and is now becoming more and more visible.
Sometimes there are little surprises,
but usually you integrate them into the bow
and then it fits again.
Carefully, the carpenter follows the annual ring
around the branch hole and the branch stump.
This is the next annual ring.
A tedious and exhausting job.
You have to check again and again.
On the front side, you also call it where you are.
There are still at least five or six rings.
You still have to remove thin rings in the height.
In any case, you have to go even deeper.
Bows have been around for 20,000 years.
Since the Stone Age, they have been used for hunting.
A truly archaic weapon.
The manufacture has basically not changed much.
Almost where we want to go.
And the last annual ring,
I'll leave one ring over it for now.
And leave it as a safety measure
in case I accidentally work too deep somewhere.
But then we have to go to this dark ring,
which is our finished bow back.
Horst Perck has strong arm muscles.
Do you need a lot of strength to work with the saw?
A little strength, but also a lot of technique.
And because of the curved shape of the blade,
it's a little easier anyway.
Of course, you have to have a little strength,
but with a little experience you can do it relatively easily.
For the fine work on the branch hole,
the carpenter changes the tool.
I'll get a bone scraper
and work with it because there's a wedge in it.
The principle remains.
Fiber for fiber, the bowman carries the wood
and carefully approaches the annual ring for the bow back,
which is supposed to hold the bow tension.
Now the ring is in such a shape
that Horst Perck can transfer the template.
We have 1.92 meters, the ring is outside.
We want a length of 68 inches.
That's about 1.73 meters.
And so we have playing space in length.
So that I can get a little bit out of the handle area
and get the branch hole more into the throwarm,
I go a little bit, a few centimeters.
3-4 cm I go to the right
so that I can get a little better from the branch hole.
4 cm is enough.
That's my bow middle.
From there I now measure the handle area.
6 cm on each side.
I'll make a mark now.
That would be where you grab the bow afterwards.
From the handle, the bow becomes wider again.
Let's do about 5 cm.
And about 5 cm in length.
Here you can see the course nicely.
We always stayed in the middle of the ring.
It's always better if you go with the wood.
Then you are exactly in the wood phase
and the bow is the most stable and most break-proof.
We make a pyramidal bow.
This means that this shape is the widest from here
and runs narrowly to the outside.
I mean, narrower to the outside.
In principle, you can see here
how the wood fibers run around the astronome.
We stay outside.
We can still get narrower.
So, that would be the rough bow design.
Incidentally, the carpenter came up with the bow design by chance.
I worked at Caritas in Euskirchen,
where a measurement participant was involved in architecture.
I was also directly involved in fire and flames.
We still have contact today and exchange ideas again and again.
At the same time, we had a tent camp
with the other architect we had invited,
where I was also infected, of course.
After a while, I also did a bow design course
with another architect.
Then it was about me.
Now I start at the widest point.
Meanwhile, Horst Perck is a bowmaker with body and soul.
He runs a 3D parkour,
gives architecture and shooting courses,
organizes tournaments and, among other things,
builds self-bows from a piece of wood.
On order and individually adapted.
They are works of art.
The dialogue with the wood is a tedious process.
The carpenter reads the wood structure during the work
and always works with, never against, the grown wood.
I start at the highest point of the branch.
Then I work to the outside
and have to carry a little in that direction.
But I start here at the highest point
so that I don't work against the wood fiber.
Always cut off from the branch hole,
Horst Perck carefully cuts the wood
away with the saw, fiber for fiber.
The rough bow shape is so far worked out.
Now a machine is used for the first time.
The band saw.
Along the marking, Horst Perck saws everywhere
where it doesn't work with the saw or doesn't make sense.
For example, when sawing at an angle on the handle.
Even at the depth of the roling,
the carpenter saws away a lot.
The sides are also rightly supported.
In the former roling,
the later arc becomes more and more recognizable.
I clamp the bow again.
Now we have to remove the last annual ring.
Sharpen the corners a bit,
because they are now nice and sharp with a knife.
Otherwise you like to cut yourself on it.
The bowman carefully clamps himself
to the previously selected annual ring.
It must not be damaged,
otherwise it will not be able to hold the enormous tension later.
Horst Perck switches to the draw knife
to remove the wood even more precisely.
In this phase, the woodworking is more reminiscent of wood carving.
Last but not least, he scratches one after the other
with a swan neck blade,
a concave blade
and a round file.
Time for grinding.
With the belt grinding machine,
the carpenter reduces the width of the bow.
In the middle is the widest point,
to the ends of the throwing arms the wood shrinks.
Again and again the checking look.
How is the alignment? How is the wood fiber running?
After processing with the machine,
the carpenter prepares the wood by hand for the first test.
How does the bowman react to stress?
With the so-called floor tiller,
the bowman carefully touches the beam.
You support the bow,
put something on the floor,
and see if it starts to bend.
You can see that it is stiffer in this area.
You draw it roughly with a pencil.
In this area, I have to remove a bit.
Here is a spot where I have to do something.
Now the next step is the floor tiller.
We clamp the bow in a handle.
Now we see how the throwing arms bend.
And see how the bending behavior of the throwing arm is.
You can see if it is already lying nicely.
The first real stress.
Can a bow break now?
Usually nothing happens here.
If something happens, it is always much later,
when the bow is almost finished.
It's just a bit too stiff.
I still have to remove a bit of material
in width and height.
In sports, this would probably be called fine-tuning.
The exchange of woodworking and stress testing.
Horst Perck grinds and shaves the areas
that are not yet properly bent.
We have now prepared one end
for damping, for damping the recurve.
It is very important,
and you really have to keep that in mind,
that you are absolutely working in the annual ring.
You can see it well here.
There are these three annual rings
that we have in the bow.
This continuous annual ring
has to be retained here.
I now have a weighing device for the recurve.
I now clamp it here in a screw stick,
where it is then inserted after damping,
and then bent over the shape and then fixed.
After damping, we have a maximum of half a minute.
Then this process must be completed.
Now it comes to the hot phase.
Bow belly side down.
The bending of solid wood is an ancient technique
and is still used today.
First damping, then bending.
We make a few small holes in the foil.
Now we turn on the fire.
Then it has to boil and then it has to
be damped for half an hour over the steam.
Arrow and bow.
Also a childhood memory for Horst Perck.
In the country you have the advantages
and you can walk through forest and field
with an arrow and a bow.
I was lucky as a child
and I had already built bows
from hazelnuts and other materials.
And of course I also played Graubühne.
Winnetou was the role model for me.
After damping, it has to go fast.
The bowman has 30 seconds to bend
and fix the bow arm in shape.
Overnight, the damped bow has to dry in the shape.
Now we have to fix one of the fingers again.
Align the bow so that it stands in the gap.
Only the so-called tampering,
the heat treatment of the recurve ends,
permanently changes the wood cells.
Otherwise, the recurve would almost completely
go back to its old form.
Now you have to wet it
so that it cools down faster
and the wood gets a little wetter again.
During the drying, Horst Perck has time
for the processing of the tips
on which the tendon is attached.
For this he saws a water buffalo horn plate
into small pieces.
The ends of the bow arms are sanded by the bowman.
There the tips will be glued on later.
Here also a little bit,
the surface again a little bit
with the saw blade processing.
That fits very nicely.
Now we make a longitudinal groove here.
I always do that with the saw blade here.
Clean up.
Horn plates, of course, just like that.
Horst Perck glues the buffalo horn plates
to the bow arms.
The bowman uses the drying time
to make arrows out of cedar wood.
Turn it around, put it on at 29.
If I drive past here flush,
I have exactly an arrow length of 29 inches.
Accurately calculated.
The length of the arrow
depends on the extension length of the bow.
That would be the direction of the notch.
Then we have a pre-direction here.
With the self-knocker he reaches
the exact depth of the notch.
The cut takes place in the right angle
to the wood grain.
Now the notch is sawn in on the outside.
Also the sawed notch, called self-knock,
is carefully filed.
Nothing should prevent the bow grain
from shooting the arrow.
No sharp edges at all.
The surface of the wooden arrow
can be painted, but also treated
with linseed or hard wax oil.
Brush out nicely to the end.
Look over it to see if there are no noses in it.
Then it is placed to dry in the device.
For a stable flight,
arrows need shaped springs.
Horst Perck chooses coloured truthahn springs.
Now we clamp the springs
into this bracket
of the spring wheel.
There are nice magnets on it,
so you can attach it.
Keep both hands free.
Now it is glued on the keel.
Right on the keel.
It is cut off at the end.
Now the bow shaft
is inserted
into the guide
of the spring wheel.
Now the spring is attached.
It looks like an arrow, doesn't it?
The self-knock is highly demanded
and therefore reinforced
with an additional winding.
We get an end.
We put it a little bit
diagonally over it.
Now we wind it
up to the top
in front of the bow shaft.
Then we slowly
pull it back.
If we have too much material,
we simply
suck it off a little bit.
Then we put the glue
that already flows out
directly over the winding.
And the winding is ready.
Only the tip is missing.
In the Stone Age,
it was often made of firestone.
Today, of course, it is made of metal.
The glue for the water buffalo horn plates
of the tips
has now dried.
In line with the ends of the throwing arms,
Horst Perken grinds the tips
to the right size.
First with the edge grinder,
then again by hand.
With the round file,
he works out the notch
for the bow string.
In the middle, the carpenter
draws in the notch
and files it out with the round file.
Now we have to connect
them with the two side notches.
So that the string can
fit in there nicely.
Like when you first
put the fence on a horse.
With a tension cord,
the archer tests the tension
parallel to both throwing arms.
Then the tension test
with the bow string.
Pull it up,
put the string in,
see if it's in the string guide.
I have to hold it here first.
It tends to twist.
Now it's out again.
I have to ...
A critical situation.
The bow is twisted.
The string is jumping out.
The bow is wobbling
like a young horse.
I have to treat it
here in the throwing arm
with heat and twist it.
It turns away
at the moment
to the side.
When it's tense,
the string always jumps out.
I have to
over-tighten it.
I have to do that in this area.
I have to treat it with heat.
Then I have to let it rest.
Then it's over for today.
Shit.
The self-bow made of solid wood
is difficult to tame.
Horst Perck
goes again with heat.
To get the bow in shape,
he has to bend the heated wood again,
fixate it
and let it rest overnight.
The twisted throwing arm
is not the only problem
of this natural bow.
A dangerous crack has occurred.
There was a big branch hole
from the beginning.
There was an adult branch
that I wanted to leave
as an adult branch
but it turned out
that there was
a slight crack
in the branch.
It was too delicate
to leave it like that.
That's why I drilled it out.
That was the safe way for me.
By drilling it out
I freed the whole branch.
The surprise
came when building the bow.
We also had a twist
in the bow.
We had to adjust it a bit.
With such a character bow
it is usual
that you don't feel
that it is perfect
if you want to fiddle with it.
The next day.
Can the bow be tensioned
or does the tendon slide
to the side again?
Horst Perck checks the bow
critically in all directions.
It looks better.
The hardness test
on the board.
Both arms have to bend
evenly.
You can see that it bends
a bit better now.
It still looks a bit different
than the other side
but that's okay.
When you have built a bow
it doesn't mean that it is finished.
The insertion
is part of the bow building.
The bow should work
permanently and
it has to be shot.
You have to get used to it.
You don't have to go all the way.
You have to get used to the bow
because it is something new
for woodworking.
It wasn't born as a bow
but a tree
and a trunk.
You have to get used to
shooting the bow.
The first shot
with the new recurve bow.
First carefully
with a fixed pull weight.
Horst Perck controls
the wood critically.
He is satisfied.
The bow behaves without problems
and tolerates the load
obviously well.
For safety it is measured.
The bow didn't bend.
The bowman shoots
the 100 test shots
to be sure
that the bow is reliable.
Everything looks good.
I can also
drive down properly.
When I have a bow in my hand
and I am stressed
due to business or
self-employment,
when I have a bow in my hand
after 2-3 shots
it is completely switched off.
The last grind
again by hand.
After the technology is correct
it is only about the look now.
Finish for the surface.
With a linen rag
Horst Perck applies
a hard wax oil
for protection and for the look.
This is an oil and wax combination.
An open-pore order.
That makes the wood
a little fire.
It is an open-pore order
and gives a nice
silk-coated body.
Now the wood is still quite bright.
Over the years
Osage Orange changes
and darkens.
As long as the bow dries
the bowman can make the tenon.
We still need a tenon.
That was a test tenon we had.
We make a two-string tenon
from Dacron
is the material called.
The tenon weight
is about 35 pounds.
A 12-string tenon
is enough.
That means we have to make
6 strings of each color.
We have to go around the pin.
It is important to go around
the pin with the 68.
We go around the pin
and first
over the outside.
We just follow
the first thread
around the 68 pin.
It is important
that we have 6 strings
And again the cutter knife.
Now we always
turn it upside down.
One turn to the right.
Upside down.
We do that
until we have
6.5 to 7 centimeters.
We lay it
around the pin
and again
upside down.
One turn to the right.
Upside down.
So that it does not open by itself.
We make a simple knot
around it.
We make both strings
next to each other.
I have to go back now.
The much-demanded
tenon center is strengthened
with an additional thread.
When the first
4 to 5 knots are made,
you can now
feel it a little.
With a special device
the thread wraps
around the tenon as if by itself.
And then pull
the loop
through and now
we have the thread here
and have made a knotless
connection, so to speak.
Flattened,
what is left over.
And here we also
remove the tape mark.
The axis is still a bit
rubbed in,
except for the middle coil.
We don't need to wax it anymore.
And the tenon is ready
for our bow.
A perfect tenon,
individually tuned
to the pull weight of the shooter.
For comfort
and better grip,
the bow is fixed
to the handle of the recurve bow
with double-sided tape,
a piece of colored bark leather.
Now comes the other side.
In addition,
the handle is wrapped
with a belt
made of kangaroo leather.
Kangaroo leather
is robust
and withstands high pull loads.
Then you have
the same picture as above,
also below as a conclusion.
A simple knot is enough.
You can also make a double knot.
I usually just make a simple knot
for fixing.
With the tenon
together
we now
tie the bow.
We put one on the tenon again.
Align the bow a bit.
Check again
if the tenon is
in the lower groove.
Pull it up
in the middle area.
About 16.5.
Now we shoot
a few arrows again.
The recurve bow is ready
and fits well in the hand
to the joy of the architect.
I'm happy
and always proud
when one is finished.
It's just an eye-catcher.
The final shooting.
This character bow
full of tension and energy
will bring a lot of joy
to its shooter.
Because of the detailed work
around the pinholes,
such a magnificent specimen
cost between
650 and 750 Euro.
It took almost a week
for Horst Perck
to create an artistic
out of a seemingly
invisible piece of wood.
And the result
goes far beyond
the coolest childhood dreams.
