Part 1 How to start a standing figure sculpture in water clay without an armature

Your Source for Sculpting Tutorials
9 followers
64 Video Views·Mar 17, 2026
Or at least start without a big armature. This method works well in supporting your clay. Another method is to use rodins triangle method so you can have support and build your clay up. Once it firms up you can remove the support and have a sculpture you can fire easily.
Support me on Patreon
patreon.com/sculptsome
Today I'm going to start a standing figure sculpture and I'm going to show you how you
can start a standing sculpture with water based clay with very minimal hardware.
So I'm going to build my sculpture this way and it might seem a little bit more odd because
remember clay weighs a lot and you build it up like this but the problem is with water
clay without any sort of armature is that it tends to kind of wobble around so the way
I do it I put like this prong on the back of the sculpture and that generally keeps
the sculpture nice and firm and I can still move it around until it hardens up.
When it hardens up we simply just remove this and we can get the sculpture fired.
Very simply this is just two pieces of pipe and I put a little bit of a weld in the middle.
You don't have to weld it you could actually use one of those tees and have the same sort
of effect but the reason I welded this together is that afterwards I put these little screws
on here and if you undo it you can see I can remove the pipe out and in and this doesn't
cost very much it's only a few dollars and I keep reusing this over and over.
Now I'm not a great welder so this weld is horrible looking.
They do have various types of sculpture armatures that hold your clay up when you're doing this
but I found that this is probably the cheapest.
Unscrew it and then I have another bolt here and I've had this for years so after I am done
with the sculpture I actually remove this bit and then I have the pipe left over but
this is such a good way of doing because I can move it around and when I want to finally
get this out I just undo this slide this out out of the sculpture and voila.
Going down to the base I have a standard wood type of base but I put a piece of like a trash
bag on top and I just taped it.
The reason I put a bag nowadays on the sculptures is that when you have your water based clay
on a piece of plastic like this when the plastic or when the clay shrinks the water evaporates
it kind of like moves the plastic and it doesn't crack your sculpture.
So I'm sure you guys have seen me use this clay before and I'll be showing you a little
bit more.
I'm using kind of waste clay a lot so this is the clay that I've used in the previous
one.
Oftentimes too this stuff is already kind of dry so I need to make sure that it gets
a little bit wetter before I can start using it.
What I like to do for the bases I really like to start out with new clay and I'm about to
take one to two inches worth of this clay and just put it as my base.
I just want to make sure that I get a good start here and then slice it off.
So I am going to plop it right over here.
Now I want to figure out where the legs are going to be.
So it's about here.
So that's the beauty of this pipe and kind of move it to the front but that also means
that you have to be aware that it might be also in the way.
So there is a downside of this system is that as you're sculpting the back this is going
to be in the way a bit but that's a small sacrifice for this sort of system.
Just where the feet are going to be I'm looking at my model and the way I tend to go about
it is that I will actually kind of make it a little bit thicker on the bottom than it
needs to be because I need to make the bottom part just a little bit thicker.
Almost like a triangle as you're heading up.
It's a little bit unintuitive to sculpt like this but it does work fairly well.
So I have my base ready.
I'm looking at my model and I have this stick here.
This is what I'm going to use for measuring and often times I'll take a measurement of
the midway of my model and I'll actually break the stick in order to reflect that.
I can actually use this as reference, the stick.
If I was to put that as the midway and that's the pubic synthesis, two of these sticks would
be the entire sculpture and that's actually a pretty decent size.
So that means they'll go into kind of like the butt area.
I'm going to have to hide it a little bit but that's a pretty decent size and I can
make it a little bit smaller if I wanted but that's a pretty decent size.
Something that you have to do as a sculptor, you have to look at the model and take some
time to really look at it, look at the position.
In previous times where I did sculpture in a class, I felt so rushed because you pay
a model and models tend to be expensive but when you have the luxury of having a computer
with access to photography and all of this stuff, you can really take your time.
So I know a lot of artists online on YouTube, they work extremely fast.
I tend to be the opposite way these days.
I used to be very fast but now I've slowed down.
I don't know why but I think I kind of like to look at things a little bit more carefully
and that's the way I approach things now but generally I think a lot of people in the beginning
they approach it much faster than they need to.
So I'm looking at my model and I'm trying to determine how I'm going to position things.
I know that his right leg is here, he's putting his weight on his left so he's got a little
bit of contrapposto going and then the left shoulder slumps in because it's a contrapposto
so your body is kind of counteracting where you put the weight.
So if you put your weight on your right foot, you do that with your shoulder to compensate.
It's the opposite.
So it's a really nice kind of contrast that you have and it makes a very stiff sort of
pose look exciting.
Contrapposto does that.
When you look at 3D artists, the T-pose that they do, it's like this.
You have equal weight on two feet.
It's a very stiff pose but the way they look at it, they just need it for reference because
they use bones to rig up their model so it doesn't really matter.
But if you're a traditional sculptor, you use the contrapposto because that's the most
fluid and it's an exciting way of having a model pose.
Very simple.
You can put any model in a contrapposto pose and it looks great.
So I'm looking at the model and I am going to start.
It's always very difficult for me to start because it's a commitment.
Now I'm probably going to do it fairly quick.
I like to leave these sticks here for support and I think I'm going to put this on the left
leg.
I'm actually going to skewer it down to the base.
What I like about these sticks is that they're very flexible but you don't want to be too
flexible here.
And you can take some liberty.
So the hips are going to be right about here.
I'm going to put the torso here and bring it all the way up to the head.
So the head is going to be maybe here.
So let's get started.
I can take large shapes of the clay and sculpt them.
So if I'm sculpting like a torso, I can make kind of like a T shape and that'll be that.
It really helps out and it's much easier than taking smaller steps.
So this top part, I'm just going to slice off because I want it to be a little bit nicer
to work with.
I am going to use this clay, it's perfectly fine.
This has got grog in it so it's a little easier to fire.
So as far as the lower body, I'm actually going to cut this in half here and I'm going
to take, I should have done a little bit more, I need just a little bit more support for
the legs.
So I'm just going to take a huge chunk, if you look at it, that's a lot of and I'm just
going to take care of this, make sure that it sticks on here and I'm just going to push
it down.
I need this to adhere really well to the base and that's right, this is two legs that I'm
using.
So I'm trying to keep this simple and at the same time I need it to support, remember this
pipe is going to be going to be right about the buttocks area and I'm going to cut that
and now I'm going to take the other slab of clay, there we go, look at that, we're starting
to get somewhere and I'm going to cut this like that and that right about here is going
to be where the lower back is going to be.
So the size could still change, it doesn't matter, it's more important to get some of
the general shapes, remember standing poses are much harder to do in water based clay
when you don't have a proper armature.
So here's the pipe and I'm going to simply just going to push this into the back and
all that does is support it while I sculpt, that's going to give me a little bit of support.
You know, Rodin used to sculpt but he did a lot of armature-less sort of terracottas
and I like those a lot, like when you look at the Balzac, that's that portrait that he
did of the guy like this, it's like a triangle going up, that's the way you can approach
a armature-less sculpture.
So I'm just going to take this and often I've had like sculptures like this as I'm building
them fall, so keep that in mind, it's just a much more difficult type of sculpture.
If you are learning how to sculpt, you want to do a sitting pose, a lying down pose but
that poses a few more things because it's a little bit easier to measure when you have
something upright like this.
So remember this is about two heads, two sticks tall, about that.
So I'll need a little bit more, I don't know how much more I'm going to add to the top
but let's go ahead and do that.
I can put it here but the problem is when you have weight like this, I mean this thing
gets pretty heavy, you have to be careful about keeping things this tall and this,
I'm about to kind of start cutting down on this.
I'm also going to add more clay here, you see how flexible this is, I'm just going to
start cutting, I might make it just a little bit smaller in the beginning and completely
remove the head.
Alright, just add some clay here, I'm going to add some clay around the pipe, that's going
to create a little bit more support.
Make sure you push in the clay pretty well, you don't want this to come apart.
So I'm just going to work on the gesture, I'll give you guys some idea what I'm doing
because right now it just looks like a huge mess but this is a kind of a classical way
of approaching sculpture.
Another really great tool to have for this sort of style is the foil, the coke can.
This is such a great tool, using this to sculpt is amazing and you do this, just get rid of
that lumpiness right off the beginning, I don't know if you guys can tell but that's
completely gone.
You know the first day of a sculpture like this is really just the support and structure,
I just work on very basic stuff, it might take a while but just kind of concentrate
on having something that's not going to fall apart.
Here midway, hips are going this way, so that's the direction of the hips and the shoulders
are going to be right about there.
So I'm looking right there is the left leg, the right leg kind of comes out to the front
so if you're looking at it this way, we actually have to have a little bit more to that leg
and then this is important, this line, you want to exaggerate this, imagine seeing the
spine through the front or the back, this S curve is really like what artists try and
do, they continue this line like to the foot so if you were to look at your body as you
Here's the spine going down, kind of exaggerate that, makes it a stronger sculpture in my
view and then the head kind of faces this way.
We haven't figured out exactly where that's going to be so you're going to get the chest
right there echoing the shoulder girdle, then you have your arm right about here, your other
arm right about there.
There's going to be a negative shape here in between the legs but I wouldn't worry about
that just yet but right now we're going to add the shape to the front leg because remember
it comes out, this looks flat so it's not like that's what we want, we don't want to
have this weird flatness, weight bearing leg, I mean this doesn't look like very much at
all yet so it really helps to have your model change often, usually in art classes every
ten minutes they move the model so right about here I'm going to slice a little bit of the
back even though I don't want to be slicing too much and I'm going to add clay where the
base is because this is going to be a very weak point.
You want this to be strong enough and also when you remove it you don't want it to leave
such a large cavity that's going to collapse and what happens as you're sculpting even
day by day this kind of sinks down a little bit, that's the bad thing about no armature
but you kind of get used to it and you just kind of learn to kind of prop up your sculpture
like this, just kind of push it up.
These little sticks I like to use them because I can skewer where I think the bones are so
for this right leg I'm just going to take this and I'm kind of like looking at my reference
and comparing the angle.
I'm going to start here just kind of putting it this way and it helps you to kind of figure
out where it's going to be because I'm getting like these mosquitoes inside here but let
me now I put it on there and if I look at more reference I'm actually not too happy
with the way he has the leg so from the front part I can tell that he actually has it more
this way so I'm going to start it here and you can exaggerate this a bit so I'm going
to take this again I'm going to add where I want this to go right about there.
These kind of help me guide what the middle is going to be so you know these things are
extremely handy you could also use calipers but I find that this is pretty darn good so
this one comes there to the middle that's where the pubic synthesis is and I can take
measurements from here and then just using this I can kind of line it up like this and
I can tell where I need to go to fill the rest so the head is going to be right about
there so that means that the shoulders are right here and the shoulders of this sculpture
because it's contrapposto remember weight is on this left leg that means that the hip
is going to be going excuse me going up so the hips are actually doing this if I can
kind of put it here and then what the shoulders are doing is this see if I can put this on
here so you guys can tell let me put some more clay so that's what contrapposto is it's
simpler and the more you exaggerate these things the more dynamic it is but you know
you don't want to go too overboard but that's about what it is and for this pose he actually
has it just a little bit more like this so in reality that shoulder is right there of
course this should be curvy because of the spine but I'm just adding this as the midway
so right now I am going to start putting in where I think that arm is going to be so this
is a rough idea of a sculpture it's not finished but of course I want to be able to add all
the elements or just a little bit often time when I do the head I don't put the entire
thing the neck is angled up like this so if I look at it this way and it's still kind
of flexible so we can kind of figure out what we want now I'm going to take the two
sticks again because I keep going back to my measurements and it actually goes down
a little bit this kind of helps you figure out where the top of the head is and now I'm
going to take the clay and I'm going to wrap it just make sure you get and push it up just
a bit because this clay or this stick I'm going to remove and also keep in mind now
if this is the front of the sculpture where you want your model to look and I think for
this sort of stuff when you have the contrapposto like this it's nice to have the model look
this way it's another dynamic way of sculpting is to have the model look away you could like
make the head go this way but I do like it's a much more natural way to look to the right
than to the left so I'll just kind of sculpt a little bit of the head that way once this
dries a bit at least I'll know the direction of how I want the sculpture to go and to look
a lot of people they create like a profile for the head I tend not to do that I prefer
to sculpt the roundness right off the bat and I'm just going to lay all of this in I
usually like to have the aid of a tool and this can still move if I wanted to make the
neck a little bit thinner and the trapezius because I'm going to have to drop the shoulder
because right now they're it's a little bit angled but I want to bring this down but what
you can also do is bring the right shoulder up and I am trying to keep in mind that this
could fall off the armature remember it's just that pipe holding everything up you definitely
don't want to move your sculpture around when you're doing this as far as like moving the
stand you want to be very balanced so let me and this arm is actually going towards
the back but it's the way he has his body he is actually twisting the torso but I'm
not exactly sure how much I will be twisting now I'll probably do that a little bit more
in the next session and remember use your big tools for the initial stages because people
get caught up to they get too caught up in details if you use big tools like this paint
scrapers flat wooden tools it keeps you from doing useless detail that you're going to
be erasing later on because you made a mistake and in my way of sculpting I make so many
mistakes that you're better off doing that so I'm just going to smooth the back out a
little bit alright guys I think I'm pretty much done for today with this so this is pretty
much what I'm leaving it at and the reason I'm leaving at this point is that it's too
soft to really work on it too much this is getting too thick but I'm okay leaving this
amount of clay tapering off to the top because I need some sort of structure to support this
tomorrow I'll continue this and I will start adding a little bit more of the gesture but
for right now I always try to like work on the structure of the clay the next step is
the gesture and the pose and then I'll start doing the details as per usual thank you for
watching hope you guys learned something and I'll see you in the next video
