Detailing Morgan Freeman’s Portrait in Clay

Your Source for Sculpting Tutorials
9 followers
Nov 14, 2026
AI Generated·May contain errors
Hello, dear friends! I'm glad to welcome you
to our final lesson devoted to sculpting an aged
ethnic portrait of Morgan Freeman in the traditional medium.
This final lesson is devoted,
as you can see, to detailing, finishing the surface,
adding textures and small moles modeling
the eyebrows, all the wrinkles and micro wrinkles.
Today we'll work through and all of that.
It is quite a lengthy process,
you can see that I'm preparing the piece for final modeling.
I clean and level it with a small very tiny wire loop,
so that there are no even slight
irregularities, to level the entire surface as much as possible
while still modeling it
according to the anatomy of the form.
So this process will also take some time.
As you can see, I've already worked part of it with the loop,
but I left part of it
for you to see the principle I follow, working through it slowly.
You must understand that this will take time.
Several hours, definitely.
Be sure to devote time to this kind of polishing of the final surface.
Give it the time it needs.
Everything, absolutely everything, every hole and bump,
model everything as thoroughly as possible,
leveling and adding material where needed,
building up where needed, leveling and smoothing.
A wire loop is the ideal tool
for finishing the surface.
It creates a slight matte effect on the clay surface,
which makes all the unevenness and roughness much easier to see.
It also does not simply cut or remove,
but presses and slightly trims, so to speak.
This way, you can see that all the medium forms
and nuances are preserved, but the price
is a great deal of work
and patience in working through all these details.
Notice that I always try to move across the form,
not along it. That way, you work specifically into the recess.
And after using the wire loop, you won't need to smooth it further,
polish it with a finger or anything else.
No, we'll move straight on to detailing.
Or rather, texturing.
In a sense, the detailing itself is already happening now.
And it will continue throughout the entire process.
In theory, the portrait itself
was already finished.
You could stop, once the likeness is achieved.
But this time, we've
Gone, further, and with an aged ethnic portrait.
This sense of age, in particular,
lets us focus on accents, such as texturing, working
on wrinkles and pores, because with age,
the skin, one way or another, wears down, pores
enlarge, it sags a little more, it becomes looser,
and becomes covered in micro-wrinkles
and regular wrinkles.
So, in an aged portrait, wrinkles.
Pores and folds, when realistic and naturalistic,
will look quite natural.
For example, I have almost never seen
anyone heavily texture a female portrait.
No, that would be completely wrong.
A very important point here, friends, is how our pores will look.
By the way, please note that in this case,
I won't work on micro-wrinkles in the traditional medium.
If you'd like to see how micro wrinkles
are handled in relation to ordinary wrinkles,
I recommend watching the lessons on the digital approach.
Yes, digital sculpture differs because you can take a tiny eye,
a tiny nasolabial area,
a small nasolabial fat pad,
blow it up full screen with pores like huge lunar craters.
You can do all of that.
Here though, we take a different route.
In the traditional medium, much of this,
even if we do it, will never be seen or appreciated.
So what I'll show you is the most essential part.
You can now see the stretch film and how I apply it.
It's best to apply it with a finger or a brush.
Yes, an ordinary brush.
What kind of brush do we need?
Right now, I'm using toothpicks to secure it.
Notice that I insert them into places that will be easy to correct
and repair later.
Of course, I recommend stretching
the film over the entire face at once.
That will be much more convenient.
Next, we need a brush.
We need the bristles to be as stiff as possible.
As stiff as possible.
Not medium, not soft.
But a brush you don't mind using and very stiff.
In this case, I found an old one at home,
a very simple brush that was quite stiff,
and it worked perfectly. This is what it looks like.
You can rub the stretch film with a finger,
pressing it against the clay.
Or to take the brush and tap it like this. Tap, tap, tap, tap,
and it will press it down nicely.
Here you can see that I'm creating pores immediately.
Those who watched the digital approach
So different methods,
here the brush is the tool we need at the beginning, in the middle
and again at the very end.
For now I'm establishing the surface texture,
I'm almost piercing it, you know with quick
light taps.
Look at this close-up to see how it works,
see the tiny pores that appear because I'm
I'm working through the film.
They don't have harsh sharp contours and edges,
but look as if a button were pressing into a tufted sofa.
It gives a perfect pore-like effect.
First, after the wire loop,
these pores remove the loop marks and they make the surface more
naturalistic, realistic and unified.
And so we proceed little by little. It's a huge amount of
work. It can tell you how much time I spent
in total texturing the whole head. Three and a half
That is a lot for me.
It's like recording almost four hours.
Lessons. In the time I can sculpt the main forms,
central area, nose, lips and almost the eyes.
That's how long all this texturing took.
And of course, I sculpted the eyebrows. Here you can see
how differently I'm using the tool now.
I hold it very delicately with two fingers. Look closely,
one finger holds it and the other adjusts and stabilizes it,
so my hands don't shake.
Also, try to keep your hands supported against
the surface with your forearms and wrists supported,
so your hands shake as little as possible.
When both hands hold one tool, one is leading,
the other supports and guides it, giving maximum control of your hand.
Next, you can see that where the wrinkles are strongest,
and I try to follow this exact photograph.
I begin laying them in with the tool. I'm not using a sharp tool.
Notice that I press several times, first in one direction,
then another, at one angle, and then another.
So, this large wrinkle opens up as naturally as possible.
Also, I don't draw it as one continuous line.
But layer it with slight offsets.
Then I take the brush again, first rubbing left and right,
and then cover the whole area with pores.
Why?
Wrinkles must not look like scratches or gouges.
They must become part of the sculpture.
Your task is to show the wrinkles and not show them at the same time.
In other words, to hide them.
And I'll continue gradually working everything this way.
Here are the tiny wrinkles and how they are laid in.
Next, we'll gradually move down toward the lips
and see how the wrinkles run across them.
For now, I'm only marking them.
This is very important with these light scratches.
I'm deciding where to place them and where not to.
I move the camera now,
so you'll be able to see in more detail exactly how this is done.
Unfortunately, it's quite difficult to monitor every camera.
But I want to show you very close up.
And many moments will be shown this way.
Some moments, unfortunately, didn't make it into the video.
Still, there will be plenty of examples.
Then I take the wire loop and widen them.
And afterward, I work over everything very thoroughly with the brush
to remove that cut-looking effect left by the sculpting tool.
Who needs that?
I smooth some areas with a finger,
then stipple again to avoid scratch marks.
Wrinkles should look like wrinkles, almost healed over, extremely fine.
In traditional sculpture, creating these textures is much harder.
Digitally, you create an alpha and stamp, stamp, stamp, stamp.
It's much easier there.
Let's move on.
Here I'm already covering the whole face.
Take a look.
Again, I secure it with toothpicks in the same practical holes.
Tuck it in, take the brush
and press everything into place.
Notice that now I'm texturing
a little, but mostly I'm trying
to settle everything into place.
Right now, I'm stippling the nose thoroughly.
See the amazing effects appearing around the eyes,
nasolabial fold and nose.
It becomes somewhat rough.
That's exactly what I need,
and because all this is done through stretch film,
the result is softened,
that creates this effect of disguising the form.
Yes, that's very important.
Because if we make very obvious open pores
from a distance that will overpower the piece,
the entire piece will look harsh and over-contrasted,
making it visually heavy.
This way, the pores are both there and not there,
just like on real people.
They aren't strongly pronounced, and we don't notice them.
So, on a sculpture, we should make them even subtler.
But they still need to be there.
We also carefully texture the ear.
Because ears have pores too.
That's important.
In some places, I'll take a ball stylus and make some large pores.
They occur on the nasolabial fat pad and sometimes on the nose,
so I lightly tap those areas,
like a drummer in a band, as though tapping three drums.
And after I've stippled and
pierced everything
with pores, I begin laying
in the forehead fold. Notice
that this was the first rough pass,
and now I'm starting to make it more detailed.
With the tool I tilt slightly into one plane, then another.
I've taken a fairly thick tool that creates a broad groove,
not a sharp one, and I make a little step.
One goes here, tap, and another beside it.
Why do I do that?
Because all wrinkles develop from micro wrinkles,
and that is very important.
This is something I strongly recommend watching in the digital lessons.
Because all wrinkles develop from micro wrinkles,
and that is very important.
This is something I strongly recommend watching in the digital lessons.
First come the pores.
When facial muscles move the skin, during a smile, sadness,
squinting, raising an eyebrow, anything at all,
the skin is constantly moving.
It folds across the movement like an accordion,
and this happens at the micro-level.
These micro-wrinkles appear between pores
as connecting folds like a tiny accordion, with age.
The more this happens and the more our skin ages,
the more pronounced they become.
How? They merge with one another.
They begin to cooperate. They form a kind of alliance,
an alliance of micro wrinkles forming a larger micro wrinkle.
That is exactly what interests us.
These larger wrinkles are the final result
of micro wrinkles joining together. On the chin,
notice that I don't simply cut them in, I actually press them down
I make it look crumpled. Why?
Because the mentalis muscle attaches directly to the skin,
and it pulls and puckers the skin.
I preserve this puckering in the sculpture itself. Next,
notice the tiny micro wrinkles on the lips.
Some are vertical, some diagonal, and some horizontal.
So, they already run in three directions, but here's the surprise.
You'll see that there are actually four.
There is one diagonal and another crossing it.
Look very, very closely at your references.
There are vertical lines on the lips,
and diagonals in one direction, and diagonals in the other.
And all of this is also emphasized by horizontal lines in the center.
Where the raised bumps are,
right now it looks terribly exaggerated, so I'll tap it lightly
with the tool to disguise it, then scratch it again,
brush it, smooth it slightly with
a finger and hide it all.
By the way, right now I'm drawing micro wrinkles around the lips.
Here they play an important role.
When the orbicularis oris contracts, when we say,
ooh, would you look at those wrinkles,
The lips purse into a tube,
so I made these micro wrinkles across that movement,
especially on the lips, since they are a bright, high contrast feature.
Another strong contrasting feature is the eyes.
So now you can see how I'm making tiny folds
and wrinkles as they run outward.
For now, mostly along the outer edge,
because the tear trough itself is very difficult to work on.
For now. So for now we do it this way.
Now we move on to making the molds.
Roll a tiny ball, attach it and add the detail.
Notice how contrasting these moles are.
Yes, we need to make them,
but if we simply press them in with dotting tools and ball styluses,
they will be far too contrasting.
They'll destroy the whole portrait, making it overly exaggerated.
But no, we tell ourselves, we don't want that.
I'll explain how we handle it a little later.
For now, watch how I apply them.
Large, medium, small.
They gather in small clusters.
I'm not blindly copying exactly how they are placed on Morgan Freeman.
I organize them according to a certain logic.
What logic?
I'll explain it now.
When we get to the infographic.
And I also explained this in detail in the stage review,
so be sure to watch the stage review afterward.
I arrange them into these families, I cluster them.
And some I leave completely isolated.
Here's how I make these tiny pieces.
They need to be extremely small.
My portrait is only about 13 to 14 centimeters.
Very small.
I take a thin roll, cut it with a tool,
place it on a dotting tool and roll it.
I make a whole lot of these tiny pellets at once.
It took me about five minutes.
Probably, right?
Then I just go tap, tap, tap, tap, tap.
Large ones here, medium ones here,
small ones here, and simply distribute them.
You don't have to use a dotting tool.
You can place them directly on a sculpting tool
and tap them in, then scatter them across the whole area,
just like on Morgan Freeman.
Use a reference and distribute them accordingly.
It's a slow,
fairly lengthy process too.
You can see very small ones
right beside very large ones.
This variation in mole size is very important to us,
and the pattern must be completely asymmetrical.
For now, it's quite
a routine process,
but at least you can see.
Here is a large one,
and here are the small ones.
And very soon, we'll look at them as a whole in terms of variation
and how they can
look. Here I even
place some of
them directly
on the eyelid.
If I don't like one, I remove it and place it again.
You scatter them around,
and look how this little dot travels across the mold,
across Morgan Freeman's face.
There I deliberately made a double one, like two joined together.
You look from a distance, so they appear as chaotic as possible.
At first, it may seem that they are too contrasting,
that they overpower the portrait, but don't worry.
It's important, like in chess,
to know clearly what comes next, what lies ahead.
And next, we'll disguise and hide all of this.
You'll definitely see how.
So, here are our big cities, the capitals,
then smaller cities, then urban settlements,
and then tiny villages.
That's the size variation.
There may be only three capitals,
a few more large cities,
and more urban settlements,
and villages are the most numerous.
This city principle is very important.
Try to cluster some of them this way, and elsewhere make
a tiny isolated village right on the slope of the upper eyelid.
Play with it, be artists, create beautiful chaos.
He also scattered wrinkles lightly across the entire face.
Next, watch.
Through the stretch film, I lightly press on them.
Pressing directly with my finger.
But that's still not enough.
They still look too conspicuous.
Then it's very important to brush over them from different angles
and press down any raised edges,
so they seem to grow into the surface,
so there is no hard outline around the perimeter,
so they grow into the portrait, into the head.
Becoming part of it, that's how we disguise and hide them.
See how I work and rub everything with different brushes and angles.
And now, look how they begin to change.
They immediately look neater,
smaller and fit the overall context better.
Not the portrait in the context of moles,
but the moles in the portrait.
Try to develop that sense for yourself.
See, I'm almost brushing them like teeth.
And this is the effect we get.
See how pressed down they are, especially the large ones.
The small ones are fine, but the large ones must be pressed down.
And here we'll add another little beauty mark.
Well, it's time to move on to the eyebrows.
Friends, pay close attention
to which references I'm working from and how I select them.
You must understand that at this detailing stage,
I used absolutely all the reference
boards from every lesson.
It was an enormous army of reference boards collected among
my references, examples and samples
And look at the very clear eyebrow structure I'm establishing.
Immediately build in the expression and emotion.
I finish with the eyebrows.
Now you understand why.
Because for me, the wrinkle work is very important.
Next, I lay down a thin roll,
so that it follows the exact contour I drew earlier.
But now, after some time, I realize, my friends,
that neither the tail nor the head needs to
be built up as volume.
I'll cut them down later.
It's enough to build up only the body.
Because the hairs at the head and tail are very small.
The main volume of the hairs, their actual size,
is concentrated in the body of the eyebrow.
Next, I create a plane for further modeling.
That means I cut away the convex part.
See how I sharpen the edges, trim and reduce them.
Notice exactly how I hold the tool,
how I help myself with the second finger.
That is the main secret.
How to hold the tool and manipulate it.
That really helps me.
Next, I try different tools to see what works best for the brows.
It always varies, depending on the mood, perhaps.
This tool, that tool, I try this tool too.
But eventually, I realize again that the wire loop
is a masterpiece for modeling any surface, at any level.
It's a pity they can't withstand heavy pressure and break.
You must learn to work with them very delicately.
In fact, every sculpting tool must be handled delicately.
Even with this tool, see how I gradually build the hairs.
Watch how I press them in.
I rotate with one finger and support with the other,
and these little hairs appear.
Then I soften them slightly,
because they came out too exaggerated again, and I realized, no,
I'll use the wire loop and they'll look softer and more expressive.
Now look how I lay them in with light semi-circular strokes.
And with these little pushes I even make long,
very long hairs that overlap the rest of the eyebrow.
Then I work around the outer perimeter.
I soften some areas and emphasize others.
See?
One pass over the eyebrow isn't enough,
you need another pass and another, then trim somewhere and go again.
Don't expect to make one pass and be finished.
No, make one pass, step back and look, then make another pass.
Not, oh, I need to redo everything.
No, you need to improve it.
Make some areas a little more interesting.
In some places, I felt there wasn't enough around it.
I realized my eyebrows would look too sparse.
But the surface had already been worked, so I lightly used the brush.
These sparse little hairs.
See?
Like this. There. I almost pushed them outward.
As if scraping them out of Morgan Freeman's
original surface. And look at them.
The eyebrows now look unified. Here I thinned them, reduced
the contour and simplified this area.
And eventually I realized this. That's it. I don't
need the tail. Forget it.
And the head, honestly, is barely needed either.
I'll simply cut this off
off with the sculpting tool there.
The volume is there and off we go.
I'll immediately work over the texture.
Experience has taught me that I can simply press out the tail gently.
Then I take the wire loop and begin the process.
Let's look closely at how it appears on camera.
There it is.
See exactly how.
Notice how they immediately get a pleasant micro-texture.
A kind of sculptural quality.
You can also look at the pores and at the large forehead wrinkles.
See how soft they became,
because I stippled them so heavily, really worked into them.
It's a little difficult now,
because I hold the tools differently, sometimes from above,
sometimes below,
and I change the light to see the eyebrow rhythm more clearly.
Now look, see how I press it out,
play it in slow motion and watch it again.
This is often how you can make eyebrows
when they don't have much volume.
Then I go back and begin detailing
and bringing out the larger eyebrow hairs.
See, I push it one way, then the other, and pull out a brow hair.
Unfortunately, when I work top to bottom,
it falls outside the camera frame.
But I sculpt while looking at the model,
not through the camera, so I couldn't always control that.
Yes, I came back here too and improved it further,
adding hairs that descend from above.
So, we keep returning and keep improving,
that is the key to truly beautiful work.
Well, friends, now for the hardest part, the neck, this is our finale.
There are many wrinkles here, many,
because the neck is a highly mobile connection of
our face, head and body.
Very mobile.
Why?
Because our neck allows us to rotate and turn,
we can tilt left, right, forward and backward.
So rotating creates one set of wrinkles,
and rotating the other way creates another.
Tilting creates a third set, and tilting the other way a fourth.
So the neck naturally has these main wrinkles.
They appear when we tilt the head left, right,
forward or back. These will be the largest wrinkles.
You can see in the references how
they are arranged.
I'll make these genuinely large, the others will be barely visible.
And of course, where the platysma itself sags,
along the edges I make these little wrinkles.
Right now, I'm making the fundamental main ones from tilting the head.
These angled wrinkles are the largest and most contrasting,
the biggest ones.
For now, I'm only marking them.
Later, I'll go over them with a larger tool.
And here I
mirrored
the references.
And I work on this side in the same way.
The principle is the same, just slightly different.
Here I'm using a medical instrument called a strum.
And now see these angled wrinkles highlighted in green?
I'm detailing them, I make them angled.
Besides that, I lightly emphasize the diagonal ones,
which correspond to a kind of rotation.
That is, when we tilt with the head turned one way
and then tilt with it turned the other way.
More precisely, one side and the other. Something like that.
Turn right and tilt and you get one set of wrinkles.
Turn left and tilt and you get another set.
The loosest area, sometimes called the turkey neck, is this sagging
With all these broad wrinkles,
skin folds and platysma sagging, they are very loose there,
so I make them loose as well.
Of course, I'll soften them later. I create a diagonal mesh
in some areas along the edge of the lower jaw.
The deepest areas will always contain the strongest
wrinkles and the strongest pores.
Don't try to add wrinkles and pores on exposed surfaces.
Then, of course,
we disguise all of this with the brush while creating pores.
And when I make the pores, I'm actually doing several things at once.
I disguise and hide everything
at the same time as I bring it out.
I bring out the pores and disguise the wrinkles.
That's the point I wanted to make,
so they fit the context better.
Of course.
Oh, no, no, no.
I can see it's too contrasting.
You rub it, rub it, then stipple it again.
Now it looks calmer.
Good.
And I texture the ear as well.
Excellent friends, we're entering the home stretch.
For me, the finishing stage is always what every viewer notices first.
The tarsal plates, the eye itself, and the pupil. These must be
tight, neat. While elsewhere you may allow some looseness,
imprecision, messiness or chaos,
the eyes should always be refined into something perfect,
like a diamond. Refining the tarsal plate
edges, the rims and irises with ball styluses and dots.
With all these details and nuances,
We complete our portrait. Interestingly,
many people start with the eyes while we finish with them,
giving them maximum detail.
Because it is the eyes, the refinement of the tarsal plates,
that gives a clearer sense of the gaze,
expression and psychology of the portrait.
And in my case,
this is where I finish the portrait.
Establish it all a little and disguise it.
And with a tiny dotting tool,
see how I refine all these inner edges, the tiny pupil deep
inside and work everything into the corner.
And this detailing gives the portrait a sense of being truly finished.
These tiny details.
Now compare one eye with the other.
One is loose and undefined.
While the other is really impressive, already super detailed.
You want to look at it, because it is clear,
precise and easy to understand in terms of the form.
So as a final step,
I recommend refining and polishing the tarsal plates,
eyelids, tear ducts, gaze, irises, pupil and highlight,
so everything is perfect and flawless, like a diamond.
And with that, friends, we reach the end of this large,
substantial, in my opinion,
interesting and intensive course devoted to Morgan Freeman
and Nelson Mandela.
Here you see this sad expression as he looks to the side.
As though realizing that at this moment everyone has turned away
from him, both enemies and
allies, because this sense of humanism,
this sense of forgiveness is so difficult for people
that it requires tremendous inner strength to forgive
and to love through forgiveness.
And Nelson Mandela was exactly that kind of person,
a man with a great heart, great wisdom
and profound humanity.
And that, friends, brings us to the end.
I wish you every success finishing the project.
And I'll see you in future courses.
All the best!
