Hello, I'm Andrew Joseph Keith. I'm an artist and sculptor and this video was inspired by a comment.
It says, love these types of videos, thank you. Could you make a video where you show
how to come from the muscle look to the skin look? Like after you put all the muscles,
how do you make the clay look like skin and finished? I always struggle with this.
So that's the comment that inspired this video. So thank you for the comment. Here I have a
polymer clay sculpture. I started this with the in-person sculpting workshop that I had
and now I'm at the point where I'm starting to work on these details. Now I'll start off by saying
that most of the mistakes happen with laying in the muscles themselves and defining the forms
before you even start texturing. So as I'm laying in these pieces of clay, I'm trying to be very
precise and lay the strips of clay along the direction of the muscle. I'll take a piece of
I know the tricep is coming down here. I'm thinking about where does that muscle begin,
where is its widest point from side to side and where does it end and how does that transition
into these other forms, into the armpit in this case. And if you're sculpting that way by being
very thoughtful, then you're learning a lot about anatomy by observing the reference and thinking
about and trying to understand those muscles and those muscle groups. So the first thing to avoid
is laying in those secondary forms of the muscles in a way that's not accurate. It just takes time
to develop that critical eye and that anatomical understanding of the form. Now once you have that,
the texturing is really very easy once the forms are in the right place. You're not really trying
to move things around too much because if you've done it right, if you've paid attention to those
forms up to this point, then they should, everything should be pretty much in the right place. You're
just smoothing out the texture. And to do this, I like to lay in those pieces of clay along the form
and then texture across the form this way. Then sometimes if I feel like I'm missing just a little
bit of clay, I'll take some clay onto my tool and then place it where it needs to be. And at this
point you should still be observing the reference, looking at the reference and trying to really hone
in on those forms while you're establishing that final texture of the sculpture. Now people say
like, oh how do you get that skin texture? I don't really go for a skin texture. I like what I call
a lightly tooled texture where you can still see the tool marks. I find that to be interesting.
I want it to be clear that this is a sculpture. It was sculpted by hand. So I don't mind a little bit
of those tool marks, just like I wouldn't mind seeing some brush strokes in a painting. I think
they add a little bit to the sculpture, but not everybody feels that way. Some people like to have
it perfectly smooth. Some people like to go as far as imitating the texture of the skin, the pores
and so forth. I prefer this. So it really comes down to personal preference, just what you like.
But when people say a smooth skin texture, I mean when you're close up you can see that it's not
super smooth. But if you're texturing the right way and if the underlying forms are accurate,
then our mind can kind of gloss over any imperfections in the texture and it blends
together and makes it feel very organic. Now a common beginner mistake, and I'll demonstrate it
here, and for whatever reason this is just the natural thing to do, but we like to texture along
the form. Just like this, the muscles going this way, the arm cylinder is moving in this direction,
so we'd like to go along that form, up and down that cylinder of the arm. I'm not sure why, but
it just looks amateur when you see those texture marks in the same direction as the form. So what
I recommend is coming across the form, around the form, still being soft with your texture marks,
and then breaking up that monotony of the texture lines going with the form. And I just find that
that often feels better. So I recommend laying the clay in along the form. The strip of clay,
you would lay that along the anatomy and then texture across the anatomy. You can kind of do
this cross-hatching where sometimes you maybe come up more diagonally and then maybe you come
against that direction. You're just trying to hone in on that final surface slowly and rounding off
and smoothing out those previous marks from laying in the pieces of clay. Another tip is coming at it
from different directions. Like I just said, kind of cross-hatching from one direction, then from
another, switching things up, giving some variety in those strokes that you're using to smooth out
the texture. My favorite texturing tool is this tool. I think it's called a dab tool and it works
really well for just smoothing out the texture, making sure that things feel soft and smooth,
but it also lets me get that lightly tooled texture which I really like. Now if you were
going to take this and texture it even more to even a finer finish, then you could use solvents.
This is polymer clay, so a solvent like odorless mineral spirits or similar solvents. You can use
those and brush those on and it'll kind of liquefy the top layer of clay and you can further smooth
things out with that. I prefer not to use solvents. It's just not how I like to work, but you can see
I'm able to get a pretty smooth looking finish even just with that tooled texture. If I take my
time and I'm careful and thoughtful about how I'm smoothing out that surface. Texturing is just
something that takes some time and thought and energy, though you don't have to think about it
too much. A lot of the times I can have a podcast or audiobook or something like that while I'm
texturing because really you should have laid the forms in. When I'm sculpting and really thinking
about the anatomy and trying to build the gesture and accurately locate the forms, then usually I
have to be more focused, turn off distractions, really hone in. During the texturing stage I find
that generally I can kind of go on autopilot a little bit more if I've been careful and just
kind of fill in the areas where the texture doesn't quite feel right and go over things and just get
it to one unified look. With texture you really want it to feel cohesive. You don't want the
texture to be too distinct in certain areas in a way that could distract from the piece. You want
it to feel like it was all textured by the same person. So I usually try to avoid, you know, super
smooth textures and then super like rough textures in the hair. For example, when doing the hair I
generally don't put lines for every single follicle of hair. Usually forms are enough and I treat it
very similar to skin. Hair is a lot softer than we realize and so treating it in a similar way
but just having the form be distinct is, I find, a more accurate way to treat complicated areas like
the hair. So again, those major tips are focus on putting the clay in the right place first before
you even think about texture. The sculpture should feel right. The forms should be in the right place.
Lay in the strips of clay, little pieces of clay, along the direction of the form or the direction
of the muscle. Then texture across the form. You can crosshatch. You can try to vary the strokes in
your texturing. Come at it from one direction then come at it from another. Always trying to approach
it from across the form, rounding across that form of the sculpture. You can use other tools like
texture stamps. There's a video lesson on the Proko 3D YouTube channel that talks about texture.
I cover it in the Figure Sculpting Fundamentals course. There's some lessons specifically on making
texture stamps which can be used to imitate skin textures. But remember that texture is really
something that's superficial, meaning that it's surface level. It doesn't go deep and so the deep
stuff, the muscles, the bones, the gesture, the sculpture should already be pretty accurate before
you worry about something like texture. Be patient. It takes time and practice just to get the feel of
how to roll the tool between your thumb and fingers as you're texturing to get the right
placement of the tool end on the surface. These things, this muscle memory, you can't build it
quickly. It just takes time. So devote time regularly to sculpting. Join the Sculpting Courses, the
Figure Sculpting Fundamentals course. It's a great resource to help you on your sculpting journey
so that you can improve as fast as possible as you're dedicating regular time to sculpting because
you definitely don't want to be practicing bad habits that just become more and more ingrained.
Just a few tips and some lessons could move you away from those bad habits and towards better
habits that will yield better results in your sculptures. If you have any other questions on
texturing or any other sculpting principles or just things you'd like me to cover in future videos,
please let me know in the comments below. And until next time, stay creative, stay productive,
and hopefully I'll see you again soon in another video.