Easton 5.0 vs Easton FMJ Max

Defending with Past Crossbows
3 followers
26 Video Views·Mar 1, 2026
Easton 5.0 vs Easton FMJ Max
Comments are disabled for this video.
All right. Welcome to the YouTube channel. I have a special guest. This is Tyson. He's VP
of marketing and sales. Let's talk about the 5.0. Everybody on this channel has watched me build
numerous arrows, Tyson, like tons. And honestly, when I'm building an arrow, I kind of want
autonomy. When I say autonomy, I mean like I don't want to be stuck with a heavier projectile
because of the GPI. Well, you and I both. I mean, you're 27 and a half inch draw. 27 and a half
inch draw. I'm only 27 and I'm shooting 70 pounds. I think you're shooting 80. So yeah.
So this is a 340 spine guy and this is a 300 spine guy. A lot of you are 300 and some of you like
even drop down to 250 and 200 to make some crazy arrows, which is cool. I'm all for like that.
I feel like no one's going to build your arrow with more thought and detailed as you.
So I promote people to buy blank shafts and build them up. And we have this shaft that's been in
the work for 10, 10 years, 10 years. And you've hunted with this arrow for the last two seasons.
That's right. And I only got to hunt Montana with this arrow, but this is it guys. This is the all
new Easton 5.0. We had Cody over here. We dropped out video. Well, this is Cody's boss. So we're
going to talk to Cody's boss today about the 5.0. What's your thoughts just hunting with it for the
last two years, putting down a lot of critters. I mean, for me it's speed, right? I I've told you
before, and we talked in the podcast trajectory is accuracy. For me, I want to shoot flat and fast.
Will you say that again? I like that. Trajectory is accuracy. Trademark Tyson, VP of sales,
marketing, Easton. TM with a circle. Is that right? I like that. But no, I mean, when you're shooting
fast, you just, it gives you some versatility in the field. And we talk on the podcast as well.
When you're hunting, it's all everything surrounding that one opportunity that you fight
three, four, five days in the Elkwoods to get that opportunity. And for me, this just removes
one variable. It's Hey, I arranged him and he was at 40. He took five or six steps. He's probably 45,
43. If I'm shooting a heavier arrow, I might be tempted to arrange him again. You need to
rearrange. You might have to even dial if you don't have enough pens, but you've just cost
yourself seconds and you've cost yourself movement movement. So do you want to punch your tag? And
this is a hunting channel. I'm not an, this, I'm not a professional archer. I'm not into target
archery. I'm into bow hunting, man. And to me, I think we as bow hunters need to practice those
in-between yardages. We always go to like 40 and 50 and all these even numbers that will never
shoot an animal at 40 or it's always 41 and a half, or the last thing you range that tree was
43 and you're guessing he's 45. And that's why, you know, even when I practice, I'm shooting 40
yards. I know it's 44. I know it's 45. I'm putting my 40 yard pin where I want to hit and then seeing
where I hit. Cause that gives me confidence when I am hunting. And now with the five, Oh, I'm
that distance be a few inches. That's nothing to worry about. I mean, in the heat of a hunting
situation, you're going to move more than a few inches just because of your nerves. So to me,
that trajectory piece, that speed down range, it's super important on this arrow. All right.
So you are three 40, 7.8 GPI, 7.5 GPI, 7.5. Okay. Let's break my arrow down and then we'll
break yours. So this is what I killed that Montana bull with. Um, we're running the 300.
We said it was 8.4 GPI. We put a brass hidden insert. We broke off 25. So it's a 75 50 and we
put in, so 50 grains. And then we put this collar over the top. I love a color and the hit to me.
That's the best marriage in the business. 100%. It's the best marriage in the business. It
shrinks up the front of the arrow. It gives you a little added weight, but it really makes the
front of that arrow more durable. Okay. So that's my, and then the length I cut them as short as I
can, where it's not, you know, touching the blades of the QAD, but it's close. Yep. I'm not
going to have a broad head. That's going to be cutting my fingers or anything like that, but I
come short as possible. You do the same. I do the same. All right. And then I throw a different
knock in, but that's just me. Cause it's the certain strings and the certain serving one
thing with this arrow. We haven't really talked about yet is it is coming with a new knock. Do
I have it? I think I do know. It's the new five millimeter East and micro light knock. It's,
it's got a whole new design. I think they're awesome. We've got great feedback just internally
as we've sent these out, people are loving them. Okay. So that is one added benefit to this new
arrow as well. I want to wear it, weigh this collar. I want to say it's close to 16 grains.
They vary in weight depending on the size. So this is a number probably a number two. Yeah.
Survey says 18, 18, and then 50. So that's 68 plus one 25. To me, that's got an FOCO over 15%.
Certainly kind of, I kind of like to come in at 15 is my minimum. I'm not looking for 27%,
nothing crazy, but you know, my opinion on those real high FOC things is I tell people that if it
really works, why don't we see it in target archery? I'm I'm in, you know, I shoot a little
bit of target archery. I'm no professional, but I go to a lot of tournaments. Those guys aren't
running that high of FOC. And if they could get on the podium by running 27, 47, whatever percent
FOC, they would. Yeah. I had a guy messaged me on Instagram yesterday, literally telling me he
needed to get his FOC up. And I was like, okay, well, where are you at? And he's like, I'm at 17%.
You're good. Yeah. You're good. Settle down. You're, you know, just guys, if anything, we tell
you just go test and vet for yourself. That's like, ultimately you got to test your own vein
configuration. You got to test all these components, but I like a hit. I like a collar.
Yep. I also like half outs. Those are cool. You guys have two half out offerings that you can
order. One is aluminum and the other is steel. What are those differences? Oh, the main difference
is weight. What do we got? So you've got a 55 grain and a 75 grain and that's the match grade
half out. Okay. So it's the O-ring for, for fitment is very crucial for a half out. One of
the issues you can have with a half out is not having perfect alignment. And if you get a little
bit of play in there, you know, a little bit of wobble, you put a, especially if you put a fixed
broadhead on the front of it, now you're going to create a little bit of a accelerated issue on,
you got a whole nother set of steering wheels on the front of it that are now just slightly offline
with the rest of your arrows. So that fitment ring secures and solidifies a zero tolerance fit
every time. So total arrow weight was 442. FOC was just over 15%. I'm kind of running a two-piece
component, 125 in the front. I'm running just some typical AE hybrid HPs. I like hybrids. Yeah.
Hybrids, 26s, whatever you want. They fly quiet too. They do. It's just a good, so this is kind
of my setup. Your 340, 7.5 GPI. What did you run on the front end of your arrow? So I have just
the aluminum head. I'm like kind of super on the lightweight side of things. 15. It weighs 15
grains. I have the collar, same size collar as you, so 18 and then just a hundred grain
fill point. Okay. So maybe 150 or just a little under up front. Yeah. Total arrow weight. I think
it was 383. I took it on a whitetail hunt again, let's see, two weeks ago and you know, solid
pass through on a, on a mature doe. So, I mean, it's, it's, it's still hitting hard and I think
we joked a little bit on the podcast. I killed a lot of stuff with a, with a 40 pound bow. So I,
I think it's still hitting plenty hard. I'm still grouping them pretty well. I'm going to probably
play around this year with a little bit more weight up front and get that FOC up to that like
16 ish percent range. But for now, I mean, I've had good luck with it and I really just wanted
to see how light I could get it and how fast I could shoot it, especially as a short draw guy.
Ways to bump up weight in the front. Super easy. So you have the classic aluminum hit at 15 ish
grains. You have the brass break off at 50 or 75 if you don't break it off. The collar is at or
around 18 grains. You could go from a hundred grain broad head to a 125 or a 150 and still
run the aluminum and a collar. You can try so many different things. So if you have a number
in mind, you can get it, test it, and then decide after vetting all your setups, shoot them all
and kind of find your sweet spot. One thing to keep in mind as you're adding weight to the front
is it is going to change the spine or size of arrow you need to choose. So check out the selection
chart. We have an app, an Eastern archery app. It makes it pretty, yeah, it makes it a little easier
if you don't like following the chart, you know, but it's also on our website, there's a chart, but
make sure you're watching. If you're looking at the chart, it's in that bottom section of the chart.
Make sure you're looking as you add weight up front. What is that doing to, to need you to get
a stiffer arrow? Finally, we don't have it here, but Tyson, I have killed more bulls with the full
metal jacket than any shaft. Yeah. Even to this day, there's more bulls I've put on the ground
with an FMJ. And when people hear FMJ, they kind of think, what's the word? I think they think heavy.
Okay. Fair. You said it. I was thinking it. Um, but the bottom line is we're talking about carbon
with aluminum jacket. That sucker is straight. That suck has perfect tolerances. It's a great
arrow. And you guys came out with a new and improved FMJ in the five mil. In a five mil,
it's called the FMJ five millimeter max. Versus the FMJ classic. Yeah. We're referring to the
one that's been in the line. I mean, it's been in line, I believe for 21 years. Okay. A lot of
animals have been killed with it. It's been a super successful arrow for us. What we felt like
the market was looking for was FMJ technology, which is consistency from arrow to arrow,
that exterior aluminum coating, what it does for durability, what it does for strength,
what it does for penetration in a hunting situation. It's awesome. But now it's giving
you the option to save about two grains per inch per side. That adds up quick. I mean,
you look at what it could do to, you know, I don't know, 50 grains, 60 grains, you know,
on your setup, it's, it's pretty substantial. And if you want to then just take that weight and put
it on the front of the arrow and get your FOC up, or if you want to save the weight and go back to
our last philosophy of trajectory is accuracy. What I think the FMJ max is, is it's that middle
of the road. If you're not sure if you like lightweight, you're not sure if you like heavy
weight, shoot the new FMJ max. It's right. Perfect. In the middle for that guy that's in
between. And, you know, I think archery sometimes is about extremes, you know, either like super
heavy or you're like super light with the FMJ max. I think it's just that perfect middle ground
arrow. That's super durable, super consistent arrow to arrow. It's going to be a great,
a great addition to our line. All right. So when it comes to the match grade,
so that's the 0.001 straightness. Yep. When you order that, you will also get what in the front
end? Yeah. So you'll get the hit collar and hit insert on match grade when you order it,
whether you're buying it in shafts or buying it in pre-flesh. So that's included. And if you do
get it flesh, it'll be fleshed with the hybrid 26s. That's right. From AE. So for us, I mean,
match grade is a system, right? Match grade. Isn't just 0.001 on our FMJ line. Everything is
0.001 straightness. So for us, we're really drifting to our match grade is the entire
arrow front to back needs to hit a match grade standard in order to be match grade. Okay. So
we have top of the line components and a improved vein and they're always helical fleshed as well.
Ooh, how many, like, do you know the degrees? That's always the magic question. It's three
degree, but everybody measures it slightly different when you audit that and see, okay,
I measured it two and a half, but there's an offset bottom line versus being straight,
which is nice. It didn't used to be like that. I mean, you're a big advocate for building arrows.
I like building arrows. I think it's fun. If you don't like it, you just want something out
of the box. Some people don't have time. Yeah. I don't have time. Not interested in it. If you
want something that's out of the box solid, just get the match grade version. You're going to have
an upgraded vein to what a lot of people are fletching with aftermarket anyway. And they're
all through the same color vein, which is pretty cool. I think that gives it a little bit of a
higher end look. You fletch yours that way. I've always fletched mine the same color because I
think it looks better, but that's how they're coming out of the box from the factory. That's
cool. And again, all of our products are made in the USA and fletched in the USA. So our fletching
facility is Indiana and our, the arrows are manufactured in Utah. So that fletching occurs
right here in the USA as well. Guys, let me know. We're, what do you think about going down to Utah
TAC? We got the dates on lock and your factories there. I feel like I could come down a day early,
get that camera probably in places you don't want it and check out a full factory tour. So comment
below if you want to see a factory tour in 2025. Everything is sourced and made in the States.
Nobody else can say that. And Tyson, you flew in here today just to talk some smack to my audience.
So if there was any takeaway from our conversations today, it is that trajectory is accuracy,
especially for us short draw guys. We don't have that long draw energy. Where should people get
these arrows? At your pro shop. I mean, support your local dealer. These guys are the backbone
of archery. They've got technical knowledge there. They know, they know archery like no one else. So
go to your local pro shop, check them out. If you're curious on specs, we do post that on our
website. You can go to Eastonarchery.com and check out the specs. The other thing I want the audience
to know, like you mentioned, Easton is made in the USA. We do it with American labor and we're
very proud of that. We hope the end of the day to sell to you confidence that our arrows are
made here and that they're consistent. Thanks guys. Separations in the preparation. We'll catch on the next one.
