How to Make a Roman Shield | Hobbycraft

Shielded Dynasty Network
2 followers
1 Video View·Mar 4, 2026
Hi, I'm Susie. I'm a craft stylist and mum of two.
I'm here today to show you how easy and fun it is to help with your children's school projects.
Today we're going to make a Roman shield.
To make this you will need a rectangular piece of cardboard measuring around 60 by 35 centimetres,
a strip of cardboard measuring 24 centimetres by 4 centimetres,
a sheet of gold card templates which can be downloaded from the website,
a polystyrene ball, red and silver paint, silver duct tape.
First we need to create some rounded edges on the rectangular piece of cardboard.
Take a side plate, place it on one corner and then just draw around and then cut out around the semicircle.
So now we've got the main part of the shield ready to paint.
So I'm going to squeeze some red paint straight onto the card as we've got such a large area to paint.
Cover the entire surface with red.
Once you've painted the front of the shield red, turn it over and then start on the back with silver paint.
So now we're going to make the shapes to decorate your shield with.
To print off the templates on the website, place them on the gold card and then draw around each of the shapes and then cut out.
Two elongated triangle shapes.
Four arrows.
Once you've drawn the first two arrows, flip the template over and then draw around to make the other two arrow shapes.
Then cut out the four arrows.
Next we're going to cut the polystyrene ball with a half sphere in the middle of the shield.
So first I'm just going to put a little bit of blue tack on the bottom of the ball just to hold it in place.
And then very carefully, with a knife, cut the ball in half.
Then we're going to glue the half sphere to the middle of the shield.
Press down firmly so it sticks well.
While it's drying, draw a square around the sphere.
Then we need to paint the sphere and the square with silver paint.
If you can still see the red through the silver, let it dry and then give it another coat of paint.
Next we're going to place our gold shapes onto the shield.
And then when you're happy with the arrangement, you can stick each piece in place with glue.
Now we've made the front of the shield, we need to make our handle.
So take the silver duct tape and stick the tape over the cardboard.
Smooth out any air bubbles or creases.
Cut around the edges, just to give a neat edge.
Fold up each end of the strip of cardboard by about 4cm.
Place the strip in the middle of the back of the shield, slightly curving at the centre.
And then stick each end with a small strip of duct tape.
And here's our finished Roman shield.
For a list of what you need to make, instructions and more great school project ideas,
head to the Hobbycraft Blog or Ideas Station on Facebook.
