How to make a Celtic Oval Shield (Full Process)

Shield of Antiquity
8 followers
4 Video Views·Mar 6, 2026
The complete process of making a shield explained and shown in detail.
Hello everyone and welcome! So in this video we are going to try to make a celtic oval shield.
So let's get started. So the starting material for this is going to be a five millimeter sheet of
plywood. Now the reason why I'm using plywood is that it's just way simpler to use plywood.
Historically shields would usually be made of planks and planks attached together but it's
just way more simple to make it out of plywood and that's why I'm using plywood.
So the first step is going to be to cut out an oval out of this plywood sheet. Now I've made
kind of a template here just with different measurements and things like that. So we are
going to make the shield 110 centimeters long and 55 centimeters wide. So it's basically going to be
a 1 to 2 ratio and this template is exactly that size. So this exact one is 15 times 7.5 and I've
just done a different template just to get approximative measurements for what I'm going
to scale up on the plywood sheet. Now of course during this whole project I'll be making an oval
shield but it's very very easy for you to just make a shield of a different shape if you want
to do that you just simply make the shield in a different shape. Just trace a round instead of an
oval if you want a round shield. You just make a hexagon on the plywood if you want a hexagonal
shield and so on. So it's very easy to change and all the other steps will basically be the same
whatever the shape of your shield. So yeah let's get started with tracing an oval on this plywood sheet.
Okay so we got the whole shield traced out and now we can begin to saw. Okay so I've set it up
here and it's ready to be sawn. Now I could perfectly well use this kind of manual saw
or something like that to saw it out. That would be perfectly fine because it's very thin wood
but I'm actually not going to do that. I'm actually going to use one of these things here
just because it is, well it's easier and it's going to leave me with a smoother finish while
this is going to have kind of rough edges and stuff like that and it's just not going to look
as nice as if I use some electric saw like this. Okay so the shield is completely cut out and now
the next step is going to be to make a hole in it for the boss. So the boss I have is this one.
Now as you can probably tell it does need some polishing. I can even polish it up with my finger
it's so rusty. So anyways this boss is an antenna boss so it has this kind of spike on it as you can
see and well we don't exactly know what historically the purpose of these kind of spikes were. They
might have been for offensive purposes like you use your boss to attack but they were probably
not because as you can see here they have kind of a mushroom form where they get larger towards the
and if they really were for offensive purposes they would probably end in a spike and not in
one of these mushroom shaped things. So they probably were to control your enemy's weapon
because well if I have my boss here on my shield if the enemy weapon gets under I can kind of
control it using the boss. So that's probably what they were used for we don't exactly know but that's
probably what they were used for but they are historically anyway in any cases for this kind
Celtic shield. So that is the boss we're going to be using. So we're going to start by drilling a
hole right in the center here then you can measure the diameter of the inside here
and we are going to cut a hole of that exact diameter right in the middle of the shield.
So yeah let's do that. Okay so now that I have a hole in it I'm going to go back this saw and
actually just saw out the hole. Okay so we got our hole and now what I'm going to do is to come
in with files and actually just file away all the rough edges and sharp edges we have around here
because our hand is going to go in here and we don't want the sharp edges to hurt our hand.
Okay so I filed the edges and well now we can move on to the next step. Okay so the next step
is going to be to lay canvas on this shield. So I've got a roll of canvas here and I will take a
piece of this and glue it to the shield. So the glue I'll be using is just simple wood glue I
found that to work really well. So just get a thin layer of wood glue all over the shield and I'll
use this scrap piece from the shield to spread out the glue and then I will take my piece of
smooth everything out evenly so we get a nice finish and things like that and yeah that will
be the first piece of canvas laid on the shield. So I will be starting with the back side of the
shield and then afterwards we will be doing the front side. The reason I'm starting with the back
side is because the front side we're going to take the canvas and wrap it around the edge and get
basically a wrap visible from the inside. I don't want the wrap visible from the outside that will
look ugly I don't really care for it to be on the inside. So yeah I'm starting with the back and then
we're going to do the front outwards. Now you'll also notice that I'm wearing a normal t-shirt
instead of my tunic and that is because I will be working with glue and I'm 100% sure that I
will get glue on my tunic if I wear my tunic and well I don't want glue on my tunic so I'm just
wearing a normal t-shirt not too much of a problem if that gets glue on it. Okay so now I'll take this
cutter and just trim off the excess material just roughly just we don't have it laying around and
being impractical. Okay we got this side done so what I'm going to do now is take another sheet
of plywood I'm going to lay it under the shield flip over the shield so we have the sheet of
plywood laying flat on top of here and making it keep flat because if I just turn around the
shield right now it is going to get some marks on it because of these things here so I'm going to
take the sheet of plywood under it to have a flat surface and once we have it flipped over
we can start putting canvas on the other side. I forgot to do it but I also have to make a hole
in the canvas where the boss is going to go so I'm going to do it right now yeah just a rough
hole just to be able to access the interior stuff. Okay let's move on to the next sheet of canvas
yeah I'm just going to repeat the exact same process for that sheet and yeah let's do that.
Okay so I did the whole other side and now I flipped it back on the back side and what we're
going to do now is to trim off all the canvas on the inside of the boss just trim it off clean
and the same for the edges of the shield. I am not going to do it on the edge of the shield
on the canvas that is on the front of the shield because that we're going to wrap around over like
that to do that I need to remove that edge of canvas on the inside so let's do that.
Okay so I'm done with the middle and as you can see I've basically just taken these triangles
wrapped them over and used some glue to glue them to the inside. I'm just using these bricks here
just to hold them in place so that they don't just fall back. Now let's move on to the whole
side here now for the side I will not use this triangle method I will basically just
wrap it over just do that the whole way and of course I'll be needing for the next one to make
a small fold like this but I'll just do that the whole way around. First I'll measure exactly how
much I need how much distance I need here to get a nice wrap holding place but that is not too wide.
Okay so it is basically done now now what I'm going to do is to take another sheet of plywood
lay it on top of the shield and then put all the weight on top so we just get a nice and even
surface for it to be pressed on when it's dry. Okay so I got it clamped in between two plywood
sheets and if you don't have tons of plywood sheet it doesn't really matter I think I think
you can just very simply just put some weight onto the shield itself I would do just fine but
it probably is better to just put another sheet of plywood on. Now the reason why I clamped it
in between two sheets of plywood instead of putting a ton of weight on top of it is that
now I can actually move the shield around without too much problems and that means it doesn't need
to stand away all the time. If it had tons of weight in it well it would be impossible to move
around. So now we just have to let the shield dry. Okay so while the shield is drying we can start
working on its other components. So I've got this stick here, ash wood, I think it's the same stick
that I used for the Valknud shield and what we're using this stick here for making the handle.
So right now it's just a little bit too long I think it's 65 centimeters long the actual width
of the shield is 55 centimeters so we need to trim off the sides just about five centimeters on each
side and yeah we can start shaping this into the handle. So I measured the diameter of this stick
here and it's approximately 3.3 centimeters on average across the whole stick. Now what we're
going to be doing is to well first of all we're just going to trim off the distance we need to
trim off on each side and then once we've done that we can find the center point of the stick.
Once we have that we can take the hole that is on our shield the hole for the boss and
the hole for the boss on the shield is 13.5 centimeters across and that means we have to
take 6.75 centimeters which is half of 13.5. We want to take 6.75 centimeters from each
on each side of the center to make a 13.5 centimeter long area which is going to be the
round handle itself. Okay so I trimmed off the ends now it's 55 centimeters across then I took
the center point here and then a 6.75 centimeters out to the side we have these lines here that show
where the limit of the hole for the boss is. So what I'm going to do now is to cut down a third
of the diameter of the stick so basically the diameter of the stick is 3.3 centimeters and
we're going to cut down 1.1 centimeter into the wood here with a saw and then what we'll do once
we have cut in here is to take a draw knife like this and basically make this surface here flat
and this we do of course to help the wood sit more nicely to the flat surface of the shield
because if we just put it in like this on the shield and attached it well it's a it's a round
surface so it won't hold on to the shield that well. So it is basically done now of course there
probably be some adjustments to make but I have to make them on the shield once the shield is dry
so I cannot make them right now. So yes yeah we have to wait for the shield to dry but what I've
done is basically just yeah removed that part here made it flat on both sides so that that can
stick to the shield nicely and then I still have a round handle to hold on to. Yeah now we have
as far as we can on the handle itself. Okay so shield has been drying for like 20 hours or
something right now so yeah we can basically just remove it remove everything and see how it is and
potentially start working on it. Okay so I removed the shield the glue is not completely dry but it's
dry enough for me to remove it from the sheet of plywood and well it will dry faster now because
it is out in the air. So yeah I'm just gonna keep letting it dry and keep working on the other parts
of the shield. Now you will notice that if I take it like this and just shake it forth and back a
little bit it is very very wobbly. It's a little bit hard to see right now but it's very wobbly
and it basically doesn't have a lot of strength behind it and that is because it's only a five
minute sheet of plywood and it is in this ellipse shape so it doesn't have a lot of strength behind
it. If I had a round shield something like that the round shield has more strength behind it and
now these parts here don't just don't have a lot of strength behind it. Like if I push here you can
see it clearly bending. However in history these shields here were very often made with a spined
boss so basically if I just take the front of the shield a spine boss is a boss only it's made of
wood and it basically runs the whole length of the shield and then the middle part here is covered
with a sheet of metal. Now the great thing about that construction is that you have wood running
all the way on the length of the shield basically acting like a spine that's why it's called the
spined boss and that adds a lot of strength to the shield. Now the thing is that I don't have such a
I am using an antenna boss so what I maybe think we are going to do is to actually kind of add
like wooden pieces running all the way on the shield acting basically like a spine like a spine
boss would without having a spine boss so basically just making wood pieces running all the length of
the shield which is going to add a lot of strength without making it too heavy so yeah I think we're
going to do that. Okay so to make the spine we're going to use this piece of wood here so it's painted
by it actually is real wood we're just going to scrape off the paint off the wood it doesn't
really matter but we're going to use this piece of wood and we are basically just going to saw
it down the middle and that is going to leave us with two pieces of wood flat on one side
that we can attach on the exterior of the shield so I'm just going to saw that in two. Okay so we
got the two pieces cut now I'm just going to sand every surface of them remove all that white paint
that we don't want and then I am going to shape them down into a kind of pointy end here not
pointy but just to make it look a little bit nicer. Okay so here's the plan I have let out the
two pieces are both done let them out on the shield and we basically are going to attach
them like this to basically have a reinforcement running the whole length of the shield. Now of
course we still need to shorten them a little bit here so they actually fit on the exterior of the
boss because the boss is basically going to go like this we need them to basically stop before
the boss and have a little rounded end before hitting the boss. For down here it's basically
going to go all the way down to the edge and same for the other side. So I basically need
to measure them here and basically cut them off there and then just make a rounded edge
so I'm going to do that. Okay so here's what I've done you basically have the end here and then I
just have a sort of taper from here down to the boss so it goes down like this and this is done
on both. So I'm thinking that maybe we're going to make some carvings into these wooden
reinforcements just to make them look better. Yeah so I'm kind of thinking about what kinds
of carving we should put on there. Okay so what we're going to do now is to take the handle and
we'll test it on see how it fits and make some adjustments to make it fit better and then as we
did for these pieces here we're going to just make a taper like this on the handle on the side
of the handle because right now we just have a very brutal emblem we just want to make it a
little bit smoother and like this piece here. Yeah let's do that. Okay so right now I have
a profile of the handle and I have hand sanded it a lot so it's nice and smooth and I've also
polished these two pieces here a little bit so they are also nice and smooth. Now the next step
is going to be to not attach the handle but actually drill the hole to attach the handle
just to find out exactly where it is going to go. So yeah I'm just gonna do that. Okay so the
handle is attached not tightened now it's just completely loose but that's on purpose
because we don't want to attach it right now but we just want to test fit it and while it's
fitting perfectly. Now what we're going to do is to actually do some wood carving on this handle and
on these pieces here. So I am thinking that we go from this side here draw a line up there
and from this side up there just to get a sort of fork that connects up here and
then we have a line going up here we have take the line up there up to the edge of where the
handle is going to be get a line over here and do the same thing on this side. Just simple but
yeah I think I'm gonna do that. Okay so here is what I have done. We have this on the end
then we have a line and it separates in two. These lines wrap around the hand like this
all around and then it goes back into one line and then it's ending like this. So yeah this is
what I have done. Now I'm just gonna sand it a little bit more with sandpaper just to remove
all kinds of unevenness that the wood carving might have created and then we are going to
fire harden it and leave everything black. Okay so to fire harden this thing I'm just going to
grab a normal kitchen torch and I'm just going to start spread the fire over it and yeah like this.
As you can see it leaves the lines untouched by the fire because they're deeper in and then
it blackens the rest. I'm just going to do that and everything. Okay and now just a bit of lily
seed oil on it and now the handle is basically done. So now I'm just gonna do some wood engraving
on these two pieces here that are gonna go on the outside of the shield. Okay so I have
removed the rust from this box. It's not entirely perfect. There's still some damaged areas and stuff but
it's honestly very hard to get it perfect when it is so rusty and I think it's good enough right now.
So as you will notice I have also attached the boss to the shield. So if we go to the back side
here you can see that these washers here basically have kind of an edge here and that's the case for
all the washers because well of course they're attached to a round handle and they themselves
are flat. Now of course we don't really want these like sharp edges so what I'm actually going to do
is to remove them and bend them over instead of being flat. I want to get them round like that
so they sit more flush with the handle which is going to make it more solid and it's also just
going to make it look better and we'll get rid of the sharp edges. Okay so I bent all the washers
and now they are sitting a bit more flush to the handle. Okay so now we're actually going to start
to dismantle this. This is just a temporarily test fit because we actually have to paint the shield
and of course we don't want to paint it when the boss and the handle and everything is on because
then we have a high chance of actually getting paint on the different pieces and we only want
paint on the shield itself. So let's start dismantling it and then we'll go and paint it.
Okay so I dismantled the shield again and now we can start painting it. So I am not wearing
the tunic or anything like that and that is on purpose because I don't want to get paint all over
my tunics. I prefer just wearing normal clothes. Now before we start painting the shield I just
want to talk a little bit about paint on shields in general because of course the paint has a
purpose on the shield. Mainly the purpose is going to be to be recognized on the battlefield
as belonging to that army or that army. If you have a certain symbol on your shield you're
probably going to belong to that army that has that same symbol. But other than that there are
also purposes to the paint on the shield and especially the color because basically some
colors are going to reflect a light more and some are going to reflect it less. So black is not
going to reflect it a lot and white is going to reflect it a lot and you can use that to your
advantage. And there are certain things you can do and certain things that you should avoid. For
example you should not put white or any very light colors that reflect a lot of light on the interior
of your shield because if you have the sun coming from behind you and the interior of your shield is
white for example, well clearly the sun can get reflected on that back of the shield and potentially
blinding you. Of course there's not a lot of chances this actually happens but it can happen and you
don't want it to happen. Now for the exterior of the shield you kind of have two options. First of
which is going to be to actually have white or any other clear color on the exterior of your shield
because that way you have a chance of blinding your opponent. And the second option is
going to be to sort of kind of make a camouflage shield or try to use color that are good for
camouflage like green or brown or something like that. And if you do that that is going to make a good
shield for ambushes for example. If you put white on the exterior clearly it's not going to be a very good
camouflage except if it's snowing but in most cases that will not be the case. So yeah you
kind of can use different colors of different things and get different advantages out of them.
For this shield what we're going to do is to use green. So I have this pot of green here but as you
can see it is kind of a light green and I would like to have it a little bit darker. So what we're
actually going to do is to mix in some black paint. I have a full pot this is almost empty but
I have a full pot too. And what we're going to do is just take a little bit of green and then mix
just a tiny bit of black into it until we get the color we want. And then we're going to start to
paint it on the whole exterior of the shield and then on the interior. I'm starting with the exterior
on purpose because I want the exterior to dry as much as possible before we start painting like
the different symbols on the shield. The back doesn't really need to dry that fast. So yeah I'm
Okay so we have painted the whole shield in green. Not the back of the shield but we'll do that later.
I cannot flip around the shield right now because clearly the paint isn't dry. But I've painted the
exterior and well I have to say I'm quite pleased with the shade of green that I've got here.
Looking quite nice. So now we basically just have to let this side of the shield dry and once that
is dry we can flip it over paint the back side of the shield and then we can flip it back over again
once it's dry and start painting the symbols on this side of the shield here. So well I see you
when it is dry. So if I can give you one other advice it would be do not paint the shield in
the middle of a door opening in a place where you cannot close the door because of the shield.
It's really annoying. Now I have to move the shield to be able to close the door. Okay so it is the
next day and the shield has been drying all night and it is almost dry. It's just a little bit sticky
in some places but I'm just going to flip it over and paint the back side. And this is a paper I
used yesterday and I rinsed it after having painted with it and now it is completely frozen
so I have to find another one. Okay so the back of the shield is done. Now we just have to wait until
tomorrow. Okay so it is the next day and now we have to start painting the symbol on the shield.
Thing is I don't really know what to paint on it and I've been thinking about it for a long time
and I haven't really figured anything out. So this that I'm putting on screen right now is how the
currently looks with the boss and the two wood pieces on the outside on it. And clearly we have
to paint some kind of symbol on it. So I've come up with this idea here that I'm putting
on screen right now. So it's basically just a middle piece in black and then you have these
symbols in white. I am not going to use white exactly. I'm actually going to use a kind of
ivory a little bit beige color but it's basically white. And well it's very simple but I think it
will do the job and it's looking quite nice. So that is what I'm going for. So today what we're
going to do is to paint that middle black piece and then tomorrow if everything's dry and we can
start painting on the white symbols. Okay so we're going to paint the middle section here in black.
Now I want that middle section to be the exact same width as the diameter of the boss. So kind
of the boss divides the whole thing in two without it going around the boss. So what I'm going to do
is to actually take the boss and attach it on the shield just quickly. Just so we can get exact
diameter of it and measure that so we can start drawing the lines to where we're actually going
to have that black section. Okay so finding the middle on an overall shield is extremely hard
because you don't really have any points from which you can measure anything in front and it's
kind of it's a rounded end so you don't really know where the exact end is. So it's really hard
to find the middle but I just eyeballed it basically and I think it's approximately good.
I just placed these on the middle and basically I need that middle to trace perpendicular lines
to that to trace that center black line. I think I have the middle now and I'll just do it
from that approximate middle. Okay so now I have my lines perpendicular to the center line of the
oval shield. Now if I just took a pencil and just painted over it the edge would be very very ugly
and kind of messy. So what I'm going to do is use this tape here and I'm just going to basically
tape all the way to the edge of that line just to get a nice straight edge using the straight
edge of the tape all the way across and then that means that when I paint I can kind of paint
over to onto the tape and then when we remove the tape we will have a very nice straight line
and yeah that's the reason why I'm using tape. So I'm just going to start taping out the shield and
then we can start painting it. Okay so now we can start painting the middle here in black. Now when
you paint using such tape you don't want to rub the paint towards the tape because then you might
get some of that paint under the tape and get an ugly edge. So what you want to do is actually come
from the tape into where you want to paint and what that's going to do is to prevent any paint
from coming in under that tape. So let's get started with painting with the black paint.
Okay so I'm done painting it. You want to remove the tape as quickly as possible because there is
a chance that while drying the paint sticks to the tape and then when you remove the tape
the paint sticks to the tape instead of to the shield. It's not likely that this happens
especially because we're using canvas as the base as the base of the shield and the paint
sticks well to canvas but it can happen and well it's better to just remove the tape as quickly as
possible. So let's do that right now. Okay and now we have the middle piece painted and well we just
have to let it dry and then we can start painting the rest. Okay so we are ready to paint the symbol
on the shield. As a reminder this is what we're going to paint with the shield and usually for
such kind of complex symbols where I have multiple lines to paint what I would usually do is to come
in with some paper tape like this and actually tape all over the whole shield where I'm going
to paint. Then I'd come with a pencil and just draw what I'm going to paint on that paper tape
and then I would come in with a cutter and cut away the tape from the place I'm going to paint
and then paint over. The problem is that this tape here is actually old and that means that
the glue has kind of dried so if I take a piece of tape try to stick it on the shield
it's actually barely sticking at all and I noticed it when I was making this black middle section
here. It wasn't too much of a problem for that because it was only two pieces of tape on each
side so it went fine but when we're talking about such complex symbols that is going to be a problem
so I'm actually not going to use tape this time and I'm actually just going to draw straight in
the shield with a pencil and just basically hand paint the whole symbol with a small pencil.
I haven't really tried this before so I don't know how it exactly how it will turn out but
it should be okay and I think that in any case historically shields wouldn't have these perfect
exactly straight lines so I think hand painting is just going to make it look great in any case.
So that I'm going to do, let's get started with that. So the color I'm going to be using is this
kind of ivory color in English for some reason it's called buff titanium buff titanium I don't
know why it's called that but uh yeah that's what we're going to be using it's kind of an ivory color
uh yeah let's start drawing. So I cut out this piece of canvas here and started drawing the
symbol on it. The thing is that I'm not entirely pleased with how it looks it's a little bit boring
and yeah I don't know so I'm actually just going to start sketching something else and see if I
come up with something better and yeah we'll see. Okay so here is what I have come up with
sort of dragon uh snake dragon-ish thing so the tail is starting down there it's like a spiral
then I'm coming around here uh past the boss behind the boss coming around here and then we
have a dragon head spitting flames uh underneath the boss and then the flames come out here.
I mean I think it looks pretty good so now I have to paint it now we're going to paint the whole
thing in white and then we're going to do the outlines of the dragon in black we're gonna do
that afterwards uh all the details in the head like the jawline the eye uh that kind of thing
so we're gonna do that in black uh for the flames themselves I think we may do it in orange and red
but I'm not sure yet we'll find out and then maybe we can also add a like a sort of scale
pattern or something like that uh with black lines we'll see about that but for now we just
have to get this drawing here onto the shield so we can start painting it. Okay so I cut it out and
laid it on the shield and now we basically can start drawing around the outline of that piece
of canvas just to get this shape drawn on the shield and then we can start painting. Now I
think that I'm going to start painting the flames and not the dragon itself because I actually want
the flames to come under like the teeth and the mouth of the dragon I don't want to paint the
flames over that so I'm going to start by painting the flames and what I'm going to do to paint them
is to first start with this yellow ochre color just paint roughly a little bit smaller than
this flame here and then I'm going to come over with red paint while the yellow is still not dry
and actually paint over with with some red and what it's going to allow me to do is to actually
bring some of that yellow into the paint and kind of mix it into a orange color so we basically have
yellow red and orange kind of mixed up together in that in that flame shape. That is the point
so yeah we're going to start by doing that once that is dry we can then start painting the rest
of the dragon. Okay so as you can see we have now done the flames so you can see that the point is
kind of to get like an uneven mix of the colors so it's kind of an orange but you have some clear
shades of red and some clear shades of orange or yellow that is the point and yeah I think we did
quite good here also as you can see I used the pencil to kind of draw the color outwards as
flames would look so well yeah so now I'm just gonna rinse off the pencils and stuff like that
and then we can actually start to paint the actual dragon. Okay so I've got all sorts of pencils
ranging from this size to this one so of course for different works like the big neck of the
dragon can be painted with this one and then the end of the tail should be painted with this one
and so on so yeah we're just going to start painting again we're going to use this ivory
kind of color yeah let's just get started with painting. Okay so I have come as far as I can
today it is not entirely done because we still have not done the teeth we have not done the eye
we have not done these kinds of things which we will have to do but currently I've come as far as
I can I cannot paint like the teeth and stuff like that over the flames so I can't do that now
and yeah we'll just have to wait until tomorrow. Okay so it is the next day and now we can start
painting the teeth of the dragon and some other details like the eyes and stuff like that. Okay
so we are officially done painting the shield whole paint is completely complete for the head
here I made the teeth made the outline of the teeth of the jaw jawline nostril and eye and
I also have a red eye and then I made a black outline on the whole dragon. So we are now done
painting it it is late today and we have to dry let the paint dry so I see you tomorrow for well
final assembly and then rawhide. Okay so I've got some rawhide here now as you can see it is
relatively stiff and hard to bend so that is going to make it very hard to like bend around
the rim of the shield and stuff like that so I actually have to soften these up before I can
put them on the shield. So what I'm going to do is to put them in this bucket of water because water
is actually going to soften it up so we can actually bend it around the rims and stuff like
that and then the water will evaporate and the rawhide will then stiffen and protect the shield
well. So I just have to put this into this overnight and then it should be soft by tomorrow.
Okay so it is the next day everything's dry and well now we can start just assembling all the
components of the shield and we'll just finish the shield. So I've got all the necessary components
right here so of course we have the parts that we have made these two pieces that are going to go on
outside the handle. We have the boss and then to attach that we have these bolts that are going
to attach the handle and two screws on the sides of the boss. Then I also have these small screws
here that I am going to use to attach from the inside these pieces here just screw them in from
the inside of the shield into these and I also have some wood glue to attach them just a tiny
little bit and on the handle just to make it a little bit more secure and then you'll probably
have noticed that on the boss we have these three holes on the top and three holes on the bottom
and of course these holes need to be attached with something. Now usually when I make a shield I will
usually just take some bolts like this and just use them for the other holes too. Now the thing
is that usually the bosses I use are going to have four holes the two on the sides and one up one on
the bottom one on the top and now I have three holes on top three holes on bottom for a total
of eight holes. If I used bolts for everything it would just be a complete overkill and just be
completely unnecessary. So instead what I'm going to do is to use these nails here we're just going
to nail them through the shield and then on the back side we're just going to
bend them over to hold everything in place and so that we don't have a nail sticking out the back
of our shield. Now I also have this drilling machine here I just drill some tiny holes for
screws and nails so we don't crack or split or anything like that the wood. Then I also have
this hacksaw here a reason being that the bolts here are just a little bit too long of course
and don't want them to stick out too far out in the back of the shield because well I don't want
to have anything sticking out of the back of the shield because I might hurt myself on those bolts
so I have the hacksaw just to cut off the excess of the bolt that we don't need to have. Then I
also have a rabbit skin here that I'm going to put on the inside of the handles so we just have
some padding instead of our hand just hitting the inside of this hole and the inside of the boss.
And I also have some tiny nails to attach the rabbit skin and also to attach the rawhide that
we put in water yesterday. So the rawhide right now is completely soft as you can see so now it's
going to be easy to shape around the rim of the shield and now that is the last thing we're going
to do actually maybe the rabbit skin is going to be the last thing but the first thing we're going
to do is just assemble the other parts of the shield. So yeah let's just get started by with
assembling everything. Okay so the shield is done I would say it is looking really good and I've
tested a little bit and it's working great the weight is great it's not too heavy but it still
is rather tough for the size. So yeah overall I would say this is a great shield. Now this shield
took a lot of time to make like I think I've been working on it for like three weeks or something
but it's not like very intense work like some of the days was like I just went out painted it for
like 30 minutes or something and then I couldn't do anything else because the paint had to dry
and that is kind of the problem with this whole shield making process that there is a lot of
things that have to dry for a long time and that means you cannot really work very intensively on
the shield making. When we made the sprint angles for example I could work really intensively one
day and get a lot of stuff done in one single day because none of the things had to dry or anything
like that. Now of course I've not been working on it like every single day or anything like that
there were some days where I just didn't do anything simply because I didn't have time or
didn't want to or something like that but overall making a shield will take a lot of time because
you have to let different things dry. Now I may also add that we did a lot of unnecessary steps
on this shield like you wouldn't need to put the counters on, you wouldn't need to make these
wooden pieces out there, you wouldn't need to do any wood carving, you wouldn't need to do any raw hide
or anything like that and I think that if you just want to make a quick rough shield just real fast
I think you can get that done really really fast if your only goal is to get a shield fast.
For example if you have been recruited into an army for example and just need a shield real fast.
Considering you make it out of plywood of course if you make it out of planks it's going to take
a lot more time but even then it's not going to take you like several weeks or anything like that
it is still going to be rather fast and the thing that took the most amount of time I would say is
actually the paint on the shield reason being that well you need to let it dry. Now of course
I did all the possible steps you could even imagine on the shield because well I wanted
the shield to be as good as possible and also to just show you how the different steps are done
and well if you want to make this shield you can like pick out the different steps that you
actually want to do and you don't need to do all of them. So this was how to make an oval Celtic
shield. I hope you enjoyed the video and I'll see you in the next one.
