@VideoJoeKnows #howtouseasawzall #howtousesawzall #howtofixdryrot #howtorepairdryrot #howtouseapaddlebit #howtodrillwithpaddlebit #dryrotdeckrepair #dryrotdeckrepairs #fixingdryrot #repairingdryrot How to fix a dry rot deck/how to use a sawzall for dummies/DIY for beginners is what this DIY howto video is about. VideoJoe needs to access an area under the deck near the deck stairs & now he needs to cut a plywood opening for the access hole. The problem is there seems to be stucco on the backside of the plywood that needs to be removed. How is VideoJoe going to cut the backside of the plywood since there's stucco on the other side of the plywood? I guess you will just have to watch this video! Watch & learn as VideoJoeShows you what VideoJoeKnows...how to fix a dry rot deck/how to use a sawzall for dummies/DIY for beginners. Nice! https://www.youtube.com/user/VideoJoeKnows
AI Generated·May contain errors
Boy I'm all out of breath
Went back out there
and yes
This is eight feet, and then it goes further and then the stairs go on down that way poof poof poof poof poof
and I just poked a
Screwdriver crummy screwdriver through here
And it looks like maybe they put a thin layer of concrete
on this
And I think I'm thinking they they might have made a mistake
Like they started doing that and then somebody else said hey you don't do that
We still have to build that out over there for the stairs. Oh, okay. Sorry about that
And I'm thinking from this point that way there's probably one or two
floor joists
There may be made out of two by six two by eight material
Two by six meaning six inches, but two by six is only five and a quarter
They might have ran that up there. I don't think they have these types of beams beyond
for the floor joists I
think it might be something else, but
Won't really know until going through here, and I made the determination
well, I was thinking okay, should I pull the tiles up and
worst case scenario
Leave this don't cut this out
But then drop down through the floor, but then I'm gonna have to cut the flooring. I'm gonna have to
cut the paper or whatever they have up above here for the for the
the tile to set on and that could bring a big mess in itself and
Plus I probably
want to gain access to this area anyways for future and
So I think I have to do is cut this out, and I'm gonna have to
Drill some I'll drill some holes in here with my paddle bit
It'll probably
Start down here kind of low. I think you can see all this
Let's see down about there. Yeah, I can I can tilt this camera just a hair
You know
Like that and then I may have to use a
Dull sawzall blade or something it looks like there's wire
I'm feeling like chicken wire. They would have put that on the outside here, too and
So that's my next steps to cut that out and
Cut that
Other stuff out of there tap it out do something cut the wire out
That's gonna take a little bit of time and effort and it's dinnertime right now, so I'm gonna stop for right now
But this is my next step
to get over there
Hopefully you're learning something
And you want to stick with me to watch my other videos of this I?
May I may list this as part 1 part 2 part 3
or something like this, but this is gonna be a nice little project and
I don't have all the answers just yet a little bit as I go. It'll become clear and
You'll learn as
We go what more could you ask for?
I'm back from dinner
I'm gonna
Work on this some more. I thought about it a little bit more
made the determination that
I need to
Cut it out from this side
You're stuck up there
And I think it's just a scratch coat
Of stucco, and I'm not gonna dig it. I'm not gonna cut it all the way down to the ground
I'm gonna go down about no probably that
maybe
Maybe this far
I'm gonna go up probably up to this far
Look my paddle bits getting dull
And I'm not sure if the concrete goes all the way up there or not
we just
Make a line look at that. It's five inches just like before
Shoot I was hoping maybe they just ran the concrete
stucco
Maybe only halfway or so
Let's see
It's just a thin layer
And I think there's wire there, too
So it's like they they put it up there. I think some flunky probably did it
and
Because this is not the outside
Exterior of the wall for more of the stairs go down. It's it's that way another six feet or so
Okay
Down there. There's nothing
That's unusual
And so what I think I'm gonna do
is
I'm gonna find
an older bit
Blade here my saws all I don't want to mess up my
sharp
I'm not sure how well this is gonna go, but this is my next
Step in the project and see what I think I'm gonna do
is I
can only
Cut halfway because when I hit the stucco I'm gonna start hitting the wire, too
And then so I have to kind of cut at an angle and just press it down about a half an inch
or so
Along there and then
Cut all the way around the edge
And then to pull it out. I'll probably put a couple screws in here with my drill take my hammer and pull out on it
so I can try to
pull this
OSB plywood off of the stucco and it looks like the stucco in in this area is only
stapled
Right here
down the middle so
my thought is
that
Maybe I can pull it off of that or something. I don't know. We'll just have to we'll just have to see
down here
This one there's no there's no concrete right there
No, I think there is
It's gonna be slow going
That's my next step. I don't want to burn up my entire battery
The battery's getting low on this video and
Besides that you don't want to see me cutting this entire thing, you know, I'll go a little bit more
Think I'm gonna have to kneel down see I'm trying to cut through the
The wire too and every once in a while. It's bouncing off
I'm not quite sure what the quickest
Way is gonna be
So I'm trying
Now to just cut the plywood up to the concrete
From here down. I was trying to cut through the concrete too. So it's just gonna be slow going all the way
Along here and hopefully my battery doesn't wear out if it does I've got my other drill my drill here
So I have another battery
or
I'll get it
Okay, so I'm gonna continue working on that and I did bring my
my trusty clear
goggle or glasses to
For this I got my gloves on I got everything set
be prepared for your project and
Stick around. I'll show you
What I do next