@VideoJoeKnows #howtouseasawzall #howtousesawzall #howtocutwithasawzall #howtocutwithsawzall #howdoesasawzallwork #howtouseareciprocatingsaw #sawzallvsreciprocatingsaw #properuseofasawzall #sawzallsafetytips #howtousereciprocatingsaw How to use a sawzall made easy/DIY for beginners/dry rot deck repairs for dummies is what this DIY howto video is about. VideoJoe is getting ready to cut out an access hole under the house so he can then have access to under the deck so he can check out to see if his deck is rotting. Shouldn't there already be an access hole to under the deck? That's what I was thinking too. Good thing VideoJoe is here to show you how to cut an access hole with a sawzall & how to use a sawzall so you can start doing more DIY howto projects around the house. Hey the more you watch VideoJoe the more you learn is what I like to say! Watch & learn as VideoJoeShows you what VideoJoeKnows...how to use a sawzall made easy/DIY for beginners/dry rot deck repairs for dummies. Nice! https://www.youtube.com/user/VideoJoeKnows
AI Generated·May contain errors
Okay, slight change of plan. I've got the video camera set up. It makes more sense
to cut it out right here so you can see everything that I'm doing.
Oh boy, I wrenched my shoulder right there. Okay, I'm gonna cut. Yeah, you can see that.
I'm gonna cut it down here, along here, and I don't know if I have to go all the way up.
Maybe. Okay, so I've got my battery-operated drill. I'm putting my paddle bit in it,
three-quarter inch paddle bit, and I'm just going to drill a hole through this.
Okay, now I can Sawzall that. I could probably drill another hole over here.
That's going to go right through to the other side.
I should have wore my clear goggles, but I forgot them upstairs in the garage.
Okay, now I can take my Sawzall, and I can use this really super long blade in here,
and this is pretty cool. Back in the old days, I had a Sawzall that had a cord on it,
and you had to put this in and use an Allen wrench, but now, this, you just pull on the side.
This is how most Sawzalls are. Pull on the side, and that opens up the hole in there,
and then you can put it in, and in the old days, see, so I have that. The blade is facing down,
and it's closer here, but you can flip it around, and in the old days, lots of Sawzalls,
you couldn't put the blade that way. You had to flip it around and put it that way,
and see how, if you wanted to cut a piece of bottom plate, let's say, and you had concrete,
you've got the whole saw, and you'd have to cut at an angle like that, and pretty soon,
you're only using the tip from here until there, and the tip gets worn out, and so I always like
to put it this way. Then you can get, see, you can cut right down flat to something or up to
the sides or whatever, and I just charged up this battery. This thing, this thing is pretty powerful.
I never would have thought a battery-operated Sawzall would really be very strong, but I think
this is going to work really good. So, see, with the long blade, I can hold it right up against
the side of this, can't I? Now, the blade that it came with, I just stored it in here with these
others. It actually came with two blades. It came with this one. This one's kind of short,
and it's designed for wood. Oh, this would rip you up. See that? That'll rip you up,
and then they also gave me a fine one, like a hacksaw blade to cut metal and stuff.
I just didn't bring it down here, and see, that was the only one they gave me, and so, see,
I can't cut all the way. I could use this.
I just have to go up at an angle, and so I can do it with this, too.
It's just the USB, I'm going to be cutting at an angle all the way,
and like I say, that'll work, but I'm wondering. This is a pretty old blade.
I don't know how sharp it is. I'm going to try that. Yeah, that's never going to work.
It's old. Sharp down here, because most of the time, you don't use this much over here. You're
cutting right in there, so whenever you get a chance to use something like this,
you want to get in there and use the rest of this edge of the blade, too,
you know, but I think I'm going to end up deciding against that and using the blade they gave me.
Had another one this size, a few of them in here. This one was pretty sharp, too.
I've used it before, and sometimes I like to save new ones, but I've got a couple
other new ones over here. I think I'm good with this one. Okay, I put some
toilet paper in my ears for earplugs, and it's always a good idea. I've got some other earplugs,
too, but toilet paper works just as well, and I should have some eyewear on,
but I'm pretty good right here where I'm at, I think,
and this also has a safety, so see, I can't push on there unless I push the side
to push that side button in first. Either way, if I'm right or left-handed,
then once it starts going, I can let go of that. That's pretty slick. Ryobi, Home Depot, baby,
and this came, actually, with the charger, two of these lithium batteries. It came
with this drill here. This is a nice drill. Here's my battery here, and it also came
with a flashlight, a nice flashlight, but I could have used that down here and propped it up, and
the head swivels, and what else did it come with? It came with a little saw, a circular saw with
like a six-inch blade on it, and I use that in a pinch whenever needed. Look for that at Home
Depot, by the way. Sometimes they give good prices for that. You buy a whole kit like that,
and it's a lot cheaper than buying them individually. I'm looking here to see,
yep, it's still on. We're still going. Okay, I'm just going to cut this up here.
I wonder if I need to cut it. I should be wearing my gloves, too. Actually, I think I do have
some rubber gloves that I usually carry with me, and these, you've seen these at the
hardware store. These are a little bit thinner than some other rubber gloves,
and I could have used the other rubber gloves, too, and sometimes you can find them in a tin
pack or something for pretty cheap. Okay, so I wonder if I can just cut it there,
if I should go all the way. Maybe I should go all the way down. I'm hitting a nail here.
See, I should have drilled the hole down lower,
so I'll just get this out and drill one down here.
Okay, that way I got a starter point. I could go way down there and then back and forth,
but this is easier.
Let's see, that hole there, I probably bent this just slightly. I'll just bend it back a little
bit. I should have drilled that closer. I think I'm going to do the top now.
I'm just going to eyeball that. Actually, I could take my pencil,
and I could measure that if I want. Five inches, five inches, five inches.
At least I got something to shoot for. It doesn't have to be perfect down here.
Now that I'm cutting flat, I'm going to take full advantage of the rest of this blade here,
so I'm going to push it in all the way so I can extend the life of this blade, because most of
the time you're going to cut from here down to about there, depending on what you're cutting,
because here at the angle I'm only using half the blade, three quarters of the blade or less.
So up here, I'm going to take advantage of the rest of this to extend the life of my blade.
Now I can come down, and I'm probably wanting to use that hole,
clean this up here, just to get a happy medium on straightness is all.
Because once I take this out, I'm just going to leave it out, I think.
Okay, go some more here. Comfortable that way? Flip this around, try it the other way.
Okay, got it. Now, now I'm going to get you under there with me. I'm going to re-transfer
my light. I missed that one, didn't I? I'm going to get my light in here, get my camera
set up in here. We're going to take a look at this and see if we've got any issues under here,
okay? Stick with me. This is our first step on checking out underneath the stairs to see
if we have to do anything under here to fix those floor tiles on the deck.
And you're also learning other stuff, how to use a Sawzall, how to use the drill with
a paddle bit, how to cut something open like this, and all that, okay?
You think I can get through here? I think I can.