Man Says He Can't Install/Adjust Door Hinge Stops Then Does It Anyway

VideoJoeKnows
63 followers
3 Video Views·Feb 20, 2026
@VideoJoeKnows
Man says he can't install/adjust door hinge stops then does it anyway is what this DIY howto video is about. VideoJoe is at a condo & one of the things on the to do list is to check out the existing door hinge stops on a door to see if they need to be adjusted &/or repaired. If you ever need to install door hinge stops they are really easy to install & might come in handy for you too. Door hinge stops are ideal in a bedroom if your main bedroom door swings up against some glass by-pass closet doors for instance. Watch & learn as VideoJoeShows you what VideoJoeKnows...man says he can't install/adjust door hinge stops then does it anyway. Nice!
https://www.youtube.com/user/VideoJoeKnows
I'm looking at this door and this door is designed it opens up and then it there's a couch right
behind the door so what they've done is they put some door stops on here or hinge stops I call these
so you take the hinge pin out and then this piece is loose and then you put that on there
put the hinge pin through that and that's how that holds on there and then then you you can
adjust it you can unscrew this or screw it in whatever you want to get the door to stop here
to stop here to stop there whatever you got to do well that that hinge stop looks fine doesn't it
okay okay we're gonna look at this one down here and some doors I've seen only have one hinge stop
maybe they only have it in the center hinge or the top hinge or the bottom hinge but usually
you know I like it if you got one at the top stick one down here at the bottom too
and that's what they've done but see this one here is is old and the little stopper came off
and I had an old one so I'm just gonna see what I can do about taking this off I don't have any
replacements here so I gotta hope that I can get this off without breaking it or else I'm gonna
have to go to the store hey there see the nib that it fit on but you can get these at the store and
they have different models that you can get look at that now I can open the door and adjust this
and what I could do first is look and see how far the threads are sticking out at the top
and the bottom and see what I have to do and I don't have a hammer here but
just tapping the hinge pin in lots of times I don't know if the hinge pin lots of times likes
to ride up so every once in a while you have to check that out to see what's going on there
to keep that down okay so you see the threads here on this adjustment are only sticking out
about a quarter I should make the top one about a quarter too and I had about a half inch
on that let's just see what happens here get all my stuff out of the way and I'm I'm just leaving
the the camera down on the tripod low we'll just see what happens here okay see I want it I want
it to open a little bit further and so I'm going to just loosen this so I got more threads out
here to to have it to have this open because you loosen that and then that swivels that
back a little bit further okay that one was never really adjusted because the
pin was out of it you know from before so they had it shorter to allow for that but then it's
starting to dig a hole into the door silly people okay I think I'm liking that and I can do it
I mean granted it's not gonna hurt too much because it's right up against the couch
per se but it's just it's just something you can you can check out I'm liking that
check it a couple times okay there got it adjusted the same at the bottom as well as the top and
look at this this is flopping all around I guess I better fix that now too guess you're in luck
you're gonna see that as well yeah I never know what I'm gonna need for something like that
okay so the first thing I want to do is I want to look at that this here
and see I can just bend it over and sometimes the top screw is loose you can tighten that up
and it feels tight if you needed to get it tighter you could use a crescent wrench or
maybe even a little box wrench or a ratchet set or something and I like to keep this
bent not just straight but a little bit that way so I can put a little spring on it when I go to
push this back okay so I'm gonna look at this other side over here and sure enough wow this
one's this one's slightly slightly crooked but it's so tight I'm not gonna mess with that
okay so I'm gonna I'm gonna put a tilt on it a little bit and I've got a little trick
on here but I've gotta first get these little prongs in and see at the end of your blind
you've got a little nib there now funny enough if that's gone you could put a screw in there
let the head of the screw stick out let's say but more times than not you'll see that little nib
okay see it okay that fits in there and I may have to bend that out a little bit and
poke it in like that but see it looks pretty good but after a week or so or more that's probably
going to come loose again from everybody opening and closing the door opening and closing the door
okay so what is the trick that I'm going to try to do I'm going to do okay here's the here's the
trick okay let's get this adjusted you see all the slop all the slop right here okay see all that
how it slides around what I'm going to do is I'm going to take my pliers okay and I'm going to
pinch them I'm going to put it right up there and right down at that tip and I'm going to bend this
to to get it tighter together okay it's kind of tricky to do and I don't know
if you're going to be able to really see what I'm doing per se here let's get you resituated maybe
because I've got to grab just the bit I've got to get this blind out of my way like this
and grab that bend it just like that oh yeah I'm liking that maybe just a hair more
see okay you do too much you might have a tendency to break that off but that's nice and snug now
we'll get you get you back in there so you can kind of see how it's nice and snug as a bug
oh bro you see how how I took out all this slop in there by bending bending that up
okay and that's going to help hold that okay so now I'm going to go over
and I'm going to do the other side same way same way here you can't really see this too well
you know but you're just going to have to hold your mouth just right as you do it
because there's not much room get your pliers on there
okay there there way better okay I don't know how else you could do it other than I guess if you
were really so inclined you could take you could take a very very small nail pin nail or something
and tap it right in there and then that'll keep this from sliding off of that you know what I
mean pre-drill a hole or take a little brad and drive it in there with a nail set or something
with the head on it kind of kind of like a I don't know just a small little nail and that
would keep this from sliding off but see since I bent it it's going to be hard for this to come
off now at all okay so you may not need anything there at all okay so now I just fixed that
blind on the door it didn't really take me that long did it let's close this let's open and close
the door just a few times that you can see you know how snug it is yeah watch it fall off I don't
think that's coming off anytime soon now I used to I used to just bend this over and not you know
just bend the bracket and push it over at an angle and then have it flex back and have that be the
only thing but after a while I kept getting the same service calls and it kind of made me look
silly like okay we'll just keep calling me every every two or three months and I'll come back and
charge you some more to fix your door again well this way once I fix it it's going to be fixed
for quite some time okay hope you learned something
