Man Says He Can't Adjust Warped Cabinet Door Then Does It Anyway

VideoJoeKnows
63 followers
4 Video Views·Feb 20, 2026
@VideoJoeKnows
Man says he can't adjust warped cabinet door then does it anyway is what this DIY howto video is about. VideoJoe is working in a kitchen area & he noticed that one of the kitchen cabinet doors looks to be warped. Here's a great question...is there any way to adjust a warped cabinet door? Would it surprise you if VideoJoe said yes? Watch & learn as VideoJoeShows you what VideoJoeKnows...man says he can't adjust warped cabinet door then does it anyway. Nice!
https://www.youtube.com/user/VideoJoeKnows
While I'm waiting for this to dry I want to talk about these cabinets a little bit. Now Mark
he just re-cleaned these and finished them. And what did you use? What did you end up using Mark?
I think it's called Garbageman. Let me look. He had it out of a spray can. They look really nice
too. They kind of cleaned it and restored it. It's kind of kind of like you can you can find
different things at the store. But here's what Mark used. Now where did you get this Mark?
Guardsman clean and polish anytime. And was it any certain kind of color finish or you just
you just sprayed it on there and wiped and wiped it off right? Yep. That looks good. And these
cabinets are about 10 years old. And he had a question for me too. He was like hey how come the
top the top of the cabinet door you see how it's up there it's kind of pooch out just ever so
slightly. And it could be a couple things. The door could be slightly warped or the hinges might need
to be adjusted. And even if the door was warped you'd look on this straight up and you might not
be able to hardly see it. But it might kind of take a dive slightly to the right so that when
you close the door it's kind of open up at the top. So what you could do is with adjustable hinges
see like these these are concealed hinges you can undo this screw and you can pull it out this way
so that you take the back side of this out this way so that when you close the door it won't hit
first because this is pulled out it'll let the the upper side kind of push in and see what i
would do and i'm going to i'm going to check this out i'm going to undo this screw i'm going to do
this screw right here make sure that this is pulled out this way all the way and then i'm
going to look up at the top screw hinge and i'm going to loosen that up and i'm going to push
that one and make sure it's pushed in all the way you see what i'm saying so so i'm kind of
making the door caddy wampus so to speak so if i push that in all the way then that will help the
top push in a little bit and if i have this out it'll help it push in and then what i can do is
if it's not perfect at that point i can do the same thing with this one i can i can pull this
out all the way or i can push this one in all the way let's say and do the very opposite
um take it that top hinge because if i want the top of the door out just a little bit on this one
i can loosen the hinge and pull that side out all the way and then i would have this side pushed in
all the way do you see what i mean and then if it's not if it's not hitting at the top it doesn't
matter as long as everything lines up you see what i'm saying and then it's going to be a happy
and we'll look at this and see if we can keep these two kind of flush as well and then there's
other things you can do if you if you see the line here this line is really nice but if you
got a big wide gap or let's say the top is hanging down or something i see this this cabinet door here
is slightly lower than this side okay so i could take this and i can take the hinge over here and
unscrew it and push it that way and if i if i push it that way at the bottom it's going to
lift this side up okay then it's going to lift that then i would have to adjust things over there
so there's a way to do that too of course by this little set screw right here you can you can pull
the hinge the door push it this way or you can push it that way so you've got you've got two
two different directions there and so you've got two directions up at the top because you've got
four doors you can you can do all kinds of adjustments you may have to adjust this door
over here to then fit this other door okay or if the gap is the same but it's wide you can see the
shelves in there i've seen that too where the gap is wider okay then you can you can move this move
this door over and you can move this door over a little bit and then create a smaller gap so
there's lots of different things you can do check all your gaps that one looks pretty good this one
here looks looks really good too okay so check all that out too and with the concealed hinges
can you adjust your cabinet doors hope you know the answers yes and this video was not all about
how to install the quick set because i have so many of those on my youtube channel already but
i did like the fact that i put the webbing tape up in there that did not bubble at all in fact there
was one up here that i did not have any tape on because the paper wasn't showing and that even
lifted from before so i had i ended up cutting that out i went the extra mile put some more
webbing tape up there on that one because that was missing and it worked out just perfect okay
so i put some i put some extra quick set in here and i had to wait a little bit longer that was 45
minute mud but because the top paper of the sheetrock was ripped off it took longer for
that to dry that what's the deal what's going on that's because the the backing paper got wet
saturated and that let the actual quick set dry longer okay so you got to watch that i'm glad i
used quick set on that if i use all-purpose general all-purpose joint compound it'd take
forever for that to dry and i'd have to do one coat let it dry all the way you know until the
next day before i put the next coat in the next coat so now i've got i've got three at least three
little coats on here maybe a little bit more in certain areas okay with the quick set and now
i'm ready for the next step i'm going to let this dry a little bit longer
okay before i put the lightweight all-purpose joint compound
