How To Install Vinyl Plank Flooring In A Bathroom As A Beginner | Home Renovation

You Can 2
25 followers
832 Video Views·Oct 23, 2022
Hi friends, welcome back to another episode of Fix This House. On today's episode, I'm going to
be showing you how to install vinyl plank flooring inside your bathroom. The previous owner of this
home decided to install three layers which is peel and stick, tile, and plywood on this guest's
bathroom. But before I go on, please hit that like, subscribe, and notification bell so you can always
be in tune on DIYs and my home renovation throughout this whole channel. So the first
things I gotta do is pretty much tear down the whole vanity, take off the faucet, the sink.
So I'm going to be changing out everything in this bathroom. It's going to be a full remodel
so stay tuned for that whole video on the full renovation of this guest bathroom.
Now as you can see, this has tile underneath that vanity and you can also see that this is a peel
and stick flooring that they put on top. Now everything on this bathroom has to go. We're
going to disassemble the toilet so that we have nothing but bare flooring. Now the fun part begins.
We're going to do a full tear down. I'm using my crowbar so that I can get everything off easily.
I'm taking off the peel and stick now first and then we're going to move on and chip everything
away including the tile. So this is the fun part. I'm just going to speed everything up so that
you can see everything in full renovation mode. Now you don't have to watch this whole thing. I'll
put a time stamp below on when we get everything cleaned up but if you enjoy tear down like this
before we fully install everything, feel free to watch everything. Now this is the tile that
I pretty much took off on this mini guest bathroom and now I'm going to be using my circular saw to
take off that quarter inch plywood that they installed on top of the sub flooring. Using that
circular saw, cutting this up into sections make it easier for me to take off everything. Now
everything is done and complete. Now we have to take off everything including the nails.
Now if there's staples or nails on this, make sure that you take them off completely so that
when you install your new vinyl plank flooring, everything will be nice and easily leveled.
Now make sure that you do a full cleanup. Vacuum everything. Make sure you scrape anything like on
this one. You can see that there's some white marks. Those are pretty much texture from the
old owner who's textured this whole room. Didn't put a good drop and he left these white marks.
Now that we have everything cleaned up on this bathroom, as you can see I started flooring my
whole living room and I kind of stopped on this hallway leading up to my guest bathroom and I'm
also going to be flooring my washer and dryer room on the left but this I'm just going to continue on
on to my guest bathroom. Now I'm going to be showing you how I'm going to connect that
and without any transition. Now the material that I'll be using today is the golden arowana. This is
the vinyl plank flooring I got from Costco but I'll leave everything on the description down below of
all the materials that I used including this vinyl plank floor and all the tools that I used to
install this vinyl plank flooring. The tool that I'll be using is this a tapping block, the spacers
and you have your pull bar and your tapping hammer. You need your tape measure, some kind of
writing utensil, a box knife and a square. Now all this comes in the kit. I'll leave another link down
below and also what you'll need is this padding for your knees, your knee pads, ear protection and
eye protection. Now the very first thing that you need to do is measure out your first material. Now
these vinyl plank flooring are 48 inches which is about equivalent to four feet each plank. Now
starting off with the ends, this is one of the ends that pretty much just snap on together. These are
fairly easy to install. All you got to do is pretty much just snap them together and you tap them to
lock them in place. With your first measurement that you measured, very easy to cut. All you have to do
is take your measurement and all you have to do is score the face of this two to three times. They
pretty much work just like drywall. Once you score it, turn it around and then you flip it and you
snap it out and just slice off the back cover. These vinyl plank flooring already have padding
on them for dampening. Now once you cut everything in place with the scrap, place it onto the
very end to start everything. Now you have two choices on the spacers. You can either put a half
inch or a quarter inch on each end. In this case, I'm just using a quarter inch on each end and then
tapping it on with my tapping block. To continue on with the same method that you did on the very
first, just cut everything, score the front, snap it on the back and then just tear off or cut out
that dampening material and then place it in like that. Snap it like in place and gently just tap
each end locking this in place. Now this has a little tiny gap. If you experience that little
tiny gap between two planks, take your pull bar just like what make sure that you leave a gap
on each end so that your pull bar has enough space to insert and then just give it a gentle tap so
that this can lock in place. You don't want to do it too hard because it might damage your flooring.
I'm going to do a quick time lapse on this area. Now we're going to go into this
door frame. Now as you can see that I don't want any transitions. I just want to keep it
an evenly flow. Measure out the cutout and then use your jigsaw to cut that piece out
and it should fit nicely in place just like what you see here and then tap everything in place.
Okay so that's what it looks like right now. Now I'm staggering my pieces. Now depending on the
material or the product that you're using, make sure that you read the instructions on each vinyl
plank. I'm going to be putting a piece of wood on the ends because once you tap everything it's not
it's going to start shifting. It will have some type of backing for me that when I start tapping
it, it will lock in place and this will act as a stopper. Now this is only if you are starting off
right on the middle like what I'm doing. Now I'm going to be taking this stopper, this piece of
wood and I'm going to be relocating it on the other side so that when I start tapping on this
side of the plank, it's going to snap in place. It's going to act as a stopper. Now I'm
going to be taking my spacer, putting my quarter inch just like that and then tap it along in place.
Now before I go and put vinyl plank flooring around my toilet flange, I would like to put
this seal around it just to make sure that everything is nice and sealed and then scrape
off any of the wax that are left over from when you took out the toilet.
Now this is just fine prepping everything. Now I made a separate video on this. I'll leave it on
the link up on the top for that full install around on how to put vinyl plank flooring around
your toilet flange. Now it's a very easy process like what I did here. A cardboard template and
this will be my reference, measuring the difference of what I need. Now I'm just aligning
everything in place, tap putting it against the toilet flange, marking my two markers from my
template to the vinyl plank that I'll be using and then marking that straight line, measuring
the difference, transferring the measurement and then pretty much cutting around that template.
Now this I'll be using a sharpie or a black marker or pencil, doesn't matter, and you measure along
that that template. Now again I'll be leaving the link on the very top if you want to know how to
do this cut out in full detail but it's fairly easy. Once you get this technique down, it'll be
a quick install. Now with the same thing, use your vinyl plank flooring, tap it, just do it in a
reverse order. What I'm doing now is just making a reference line like what you see here, measuring
the difference and then transferring that measurement from the top using the remainder of
the template which is that half moon circle. Make sure all the lines are aligned, drawing my mark
and then cutting out that mark. Now when you put this in place, it might be a little too
small so you can just see where the interference are and then just cut those off and it should
snap in place just like what you see here. With the remainder of the vinyl plank flooring,
now you can either cut this with a jigsaw but I just choose to score it with my box knife
and I'm using my channel lock pliers to help me assist because this is such a skinny piece
but you have to be really careful when you're doing this because it will crack the vinyl
plank flooring so just be gentle so that when you're scoring these long lines of vinyl plank,
it doesn't crack. Okay so that's that and then use your pull bar to tap it in place.
Now that we're finally getting up to almost covering this whole flooring, as you can see I'm
doing a stair step method because I will be transferring more of the planks on the other
side to my laundry room and now I am coming across a vent inside my guest bathroom. Now I
also made a separate detailed video on how to do this but I'll go over it again on this video
quickly but if you're interested in how I did it, click on the link on the on the top right.
Now it's very same thing when you're going through a door frame, just measure the difference
just like what we did on the other side and just snap it in place. Now here's a trick that I like
to use. I like to use this chalk method and pretty much draw or leave a mark on the perimeter
to make a mark around where my cutout is going to be. As you can see here I'm just marking where
this area is going to be where my vinyl plank floor is going to be touching. Now once you put
it over I'm just going to give it a gentle tap and when you flip it over you should see where
you mark the cutout is going to be. I'm exposing the lines so I know where the cuts are going to
be at and then drilling this hole so that when I can I can insert my jigsaw through here and make
my cuts a little easier. All right now that's exposed now we can fully put this over the vent
and just snap it in place. Again if you can't do it in one piece it's totally fine.
Do it on two pieces and then just cut off your differences. Now I'm putting my gasket seal,
put the toilet on top and then reinsert everything in place. Now this is what my
guest bathroom floor looked like before and this is what it looks like now. Again the baseboards
have not been installed yet. So once again friends thank you so much for tuning in. If you found this
video helpful please give me a like, subscribe and notification bell so you can always be in
tune on DIYs, how-to videos and my future renovations.
