Fixing a Viewer's BROKEN Gaming PC? - Fix or Flop S6:E19

Tech Care
3 followers
Feb 21, 2026
This here is another viewer's broken gaming PC and uh well I already see a problem that I wish I
had seen in the parking lot when I picked this up. It apparently powers on but doesn't send a signal
to a monitor. This would explain why. I don't normally kick off fix or flop videos this way
but I figured since I noticed it right away I should show you as well. That graphics card is
not all the way inserted which uh well may have been from transport may have also just been that
way since the start of these issues. Now you may be thinking well duh Greg of course you're not
going to get signal out through a card like this that isn't slotted all the way correctly into its
respective motherboard but this is where the the holdup is for me. The description clearly mentions
that the system was working fine and then abruptly didn't. There's no mention of transport in between
just all of a sudden on a very specific day the system would not send a signal out and last time
I checked graphics cards don't just randomly work themselves out of PCI slots. If they did
on a frequent basis that would be a big problem for you and me. So is it possible that there's
more to the story than meets the eye? I have a sneaking suspicion there is and we're about to
find out. I hope you'll stay with me. Are you sitting on a gaming PC without an activated
copy of Windows? Forget 100 plus dollar retail keys instead snag an OEM Windows 10 or 11 key
for a fraction of the price to unlock the full potential of the OS. Oh and don't worry they'll
still remove those pesky activation watermarks. Click the links below to get started today and
easily activate with your key under the activation tab within Windows settings and be sure to use our
special offer code SKGS for a sweet discount on a variety of options including Windows 10 and 11
Pro and Home and more. Hello there and welcome to Fix or Flop a playlist where we attempt to fix
broken gaming PCs in and around the Orlando Florida area for free so we don't charge for
the labor you see here or replacement hardware if any applies and that's because of your viewership
so thanks so much for watching. Also I just want to throw this disclaimer this is totally off topic
but I was thinking about this as I was filming in this bright orange shirt. I am kind of a McLaren
fan I like watching Formula One and so when you see me wear shirts like these I have a Ferrari
shirt as well that has all the Ferrari sponsors on it. This isn't necessarily an endorsement of
any of the brands on here. I honestly haven't really paid much attention to the others apart
from this Dell Technologies logo. We've been sponsored I think a couple of times in the entire
channel's life by Dell or maybe by Alienware but just because you see me wearing a Dell logo
because it's affiliated with the McLaren F1 team that doesn't mean that I'm endorsing or getting
paid by any of these brands in this video. I just like Formula One. I like Formula One teams
especially teams with heritage like McLaren and Ferrari and uh yeah that's really all I wanted
to say there. Now if you or someone you know has a broken computer and you'd like a chance to have
it fixed for free in this series be sure to submit a form linked in this video's description.
We'll get back to you as soon as possible. As for this monstrosity this case is definitely unique
and it is missing a few panels yes that's why it looks even odder than it normally would. Before we
power it on I'm just gonna slot the card in all the way there's no sense in powering this on as
is because of course it's not going to work so we'll fix the obvious and then see if we still
end up with the same symptom described by the owner that being no signal out. You'll probably
notice there is a big open area back here I think there's another maybe piece or two missing from
this chassis apart from the left and right panels and that could also explain why this card popped
loose during transport. It definitely shouldn't be this way. The owner was describing a sort of like
fitment issue with this card as it pertains to the case and I can definitely see what he's talking
about. This card barely fits as is. I'm just gonna carefully insert the card all the way and it's
just it's kind of cringe but it's just gotta hang there for now. I know that's going to be difficult
for you all to see but the card is fully inserted. You've also probably noticed this card has sort of
like a reverse sag going on right here this is not good I will just start off by saying that you
don't want any flex in a card downward or upward because any of that flex that extends to the PCB
and specifically the GPU which is sort of in the middle here could deball or partially deball that
chip or any of the memory chips around it that'll give you at best stability issues and at worst
a completely hard bricked card. It looks like this mechanism here is responsible for that so let's
see if I can I don't know how this works I'm trying to loosen it here so we can get the card to sit a
bit lower on this side. Definitely better now that I've adjusted a screw near the back against the
motherboard but you can see the card still hangs closer to my left side here and that's because
again we don't have any support at the rear of the case this uh this needs to be rectified with
some sort of paneling or piece that that is missing it I hope that this doesn't come out
again during transport we'll have to make sure that we let the owner know of this when we drop
it back off. I think we are now in a better place to at least attempt a power on we'll just see what
happens here so flipping the switch at the rear power button up front okay it might not look on
from your perspective there are a few lights it's fairly quiet CPU fan is on graphics card fans
well those aren't on but that could just be because the card's not hot yet nope and would
you look at that already managed to get picture out so it does look like the card not being seated
properly in the board was the only issue since the owner mentioned a black screen or what he
thought was no signal he couldn't get out of I wanted to see how long it took this rig to go
into either sleep mode or just to turn the display off and it actually took a lot less time than I
expected around 30 seconds thankfully just click a key on the keyboard or click the mouse and we're
back in business but this is again a very short amount of time for something like this to happen
and could create some confusion I'll run a few burn-ins off camera just to make sure we don't
have any stability issues so far everything seems great and apart from the fact that the screen is
just randomly turning off because of the timer being set so aggressively everything else seems
healthy here and this is a very new card in fact it's still under warranty and was something the
owner was willing to send back to the manufacturer and get a replacement for if it ended up being
broken but if we look back at some of these viewer submitted photos you'll notice that the
case in its natural habitat is still missing the bracket to support the graphics card I can't tell
from these shots if the card is still halfway inserted into that uppermost PCIe slots I don't
know if that was the prevailing issue here but it was clearly an issue when we received it and it
looks like that was the only thing that needed to be done to get it to work again it is however
likely that this issue even existed in the first place because of the case what do I mean by that
well this is a fairly large card that's not the card's fault necessarily but it's a beefier card
you expect these to be larger the shrouds will be larger to handle the heat produced by these chips
and the card does fit front to back I mean it's not too long in that sense but this chassis is
very narrow I'm honestly not a fan of what I see here I don't think I would ever want to build in
a chassis like this but the owner wanted to give it a shot he thought it looked cool but the card
is just too wide for such a narrow frame what he describes having to do in order to get this card
even situated in here is connecting the card to the board outside of the case first and then
sliding everything in from the back apparently the motherboard tray portion of this chassis
slides out from the rear and that is the only way that he describes being able to get the graphics
card situated and if you ask me it's not even fully situated because we're missing some structural
support here on the card side this all around not really a a great setup I think a lot of that has
to do with the case so I've already talked this through with him we're going to swap it out for
a great one from a good friends over at be quiet I mean you just look at something like this and
you can't help but cringe the last thing I want to do is send him home with a card still loose like
this and then the issue repeat itself all over again we're back to square one so we're going
to take all of these components out and throw them into a brand new 501dx sequite has made
subtle changes to the original 500dx which I'm happy about because that case was fantastic we
built in it many times already this adds subtle RGB accents so there's integrated led strips and
things that you don't necessarily have to use but it's all there already there's no pre-planning
no wiring of any kind you wouldn't even know it was here if you didn't power it up now I know we
just came up a video talking about how we shouldn't be pairing smaller motherboards with
larger chassis the unwanted empty space below it's just not great for aesthetics it won't hurt
performance obviously of any kind in fact it might aid in performance since you have more space for
air to travel we are using a larger graphics card though so that's going to help cover up what is
otherwise unused below this will also not hinder him in terms of expandability later if he wants
to upgrade to a full-size ATX motherboard all that to say if be quiet did offer an M-ATX version of
this chassis we would be using it but they don't so let's let's maybe change that be quiet look at
that you get sound damping material as standard and you get three included 140 millimeter Pure
Wings 3 fans with PWM support they are a continued sponsor of this channel and I just want to give
them a big shout this case is fantastic you can check it out by the links below if you haven't
already I guess I'm gonna have to remove everything the same way the owner installed it all
because this card will not come out there there might be a way to remove this bar I don't know
for certain yeah I'd have to remove a bunch of different panels to do that so I'm just going to
try sliding this motherboard tray out from the rear is all being held in by a single
thumb screw oh no that was not being held in by a single thumb screw that was just for the hard
how did he how did he get this out I'm honestly just like pulling pieces off I don't okay there
we go so that's the bar that uh I'm assuming was the thing preventing the owner from being
able to install this card to the left side panel so now this card should come up okay
just a few screws to take care of and out she comes you can see we've got a few stragglers
these standoffs came out of the case because the screws for the board were torqued down a little
too hard don't want to forget power supply carefully thread these cables through don't
want to take this bracket with us just four phillips screws here bye-bye green case and
we'll be sure to carry over this two and a half inch ssd oh he used the wrong screws for this
dear god like I love how he tried he tried to get these all the way in but you see that that
screw is just sticking so far out and I don't think it's the right threading either that's
probably why this wasn't willing to play ball it's time to move to something a bit more civilized
we have an integrated rear io shield so no worry there easy does it just a few screws to go I was
also sure to relocate standoffs for this matx board you want to be careful of that because
you could end up shorting something on the back side of the board if the standoffs are not moved
to their correct locations be quiet gives us a convenient place to mount two and a half inch
ssds we'll do the samsung one here up top and we can situate it like so honestly a pretty clever
way to get ssds in here move one of the extra 140s to the front so we'll have two now intaking
fresh air dust filter going on and then the front panel will just clip in this of course has baked
in leds because why wouldn't it power supply install is pretty straightforward just slide it
in from the right side I'm a big fan of how simple this is you know the brackets at the rear I thought
it was cool back in the day this is just easier a lot of cables that are getting tucked in right
here here comes our card and this case is perfect and depth for it you can see we'll actually be
able to static mount this to the chassis with a couple of screws as nature intended wanted to
spend a few minutes cable managing this case provides plenty of leeway there we were able
to bunch up tons of cables no custom extensions so that's going to save us a bit of time but it
didn't require a ton of effort to make it look something like this here now the only other thing
left to do is install the graphics card and we'll make sure we do it the right way this time I'm not
big on removing plastic I like to let owners do that because it's a very satisfying feeling but
this does say to remove protective film before use and that's probably because the card gets
very hot so I'm going to take that liberty just to be on the safe side would have been easier to
do this with the card not installed on the case but so be it and what the heck we'll take care of
this as well I think the owner left this on because he wasn't sure if the card was bad it would just
been easier to return it with the plastic on but we know this thing works perfectly fine and when
it's all said and done if I do say so myself this looks a lot more formal I think it looks a lot more
put together like there aren't missing pieces and it just it comes down ultimately to personal
preference but I would always choose a fair degree of function before I ever started focusing on
aesthetics we did make a small exception in the sense that this case supports motherboards larger
than the one in this rig but all in all I'd say we've handled it nicely we ran cables between
the motherboard and the tray to keep them from kind of like spaghettiing up from farther below
there are small ways to work around situations like this but I think the case swap was warranted
just from a strictly functional standpoint the card is actually stable now we don't even have
anything propping up the card near the front and it still looks so much flatter there's very
little sag here and it is significantly more stable it would be wrong of us to not at least
triple check that the system powers back on and loads into windows as it did before once we
corrected the graphics card as you can see everything is illuminated now very cool looking
and I think you can even customize the lighting with the click of one button let's see that one
there there we go so all kinds of different effects and things it'll give the owner a little
bit of creative freedom who wants to experiment with that or he can just turn them off completely
this here is our post we didn't change any hardware other than the case but it seems to
have not liked the fact that we did that so we'll click f1 to hop through the bios
or maybe we just won't and it'll just do it itself it is showing that windows is loading
come on now hey there we go all right no harm no foul the case swap was a success and I can
send the good news to the owner he'll be happy to have a system that now no longer crashes when
thank you so much for watching this one it ultimately was a simple fix in the end but
we took it a step further just to make sure that this doesn't happen again I want to remind you
that we do have that link below if you would like a chance to have your broken pc fixed for free in
this playlist there's just one thing left to do and that's uh well bring this back to the owner
and uh break the good news to them thankfully we have a car for that now you've been watching
firstly thank you so much secondly you already know what this bad boy is our 140,000 mile
I call it a hell kitten it's like it's like a hellcat but you know a little slower
sounds great though we're on our way thank you so much for watching
and thanks for learning with me
