Fixing a Viewer's BROKEN Gaming PC? - Fix or Flop S6:E15

Tech Care
3 followers
1 Video View·Feb 28, 2026
This here is another viewer's broken gaming PC, and I think we should have a bit of a talk.
So firstly, the obvious, this is an absolutely beautiful rig. It is spec'd so nicely,
very balanced, and aesthetically, it's probably one of the best looking computers,
in my opinion, that we've ever had in this series. The black and white works so well together,
it's balanced nicely, the case looks super cool, it just all around was built with care.
But there's one major problem. It doesn't post. But here's why the owner thinks that's the case.
A short while ago, he had a friend repaste the CPU. I'm not sure if this was in conjunction
with a replacement AIO, this has been slowly upgraded over time, but during that process,
somehow, supposedly, the socket was destroyed. And this being a modern Intel platform means
the pins themselves in the socket were likely bent out of shape, or worst case scenario,
broken off completely. In which case, we'll be replacing a motherboard,
at the very least, in this episode. Now, I know it's not my place, but in person, I will say,
the owner was super chill, he didn't appear to hold any grudge against that friend of his,
I'm not sure if they're still friends today, but he was very cool, and he was very candid
about what he saw with his own eyes, apparently, what he suspected was the issue. That's gonna go
a long way for us in this video, I don't even think I'm gonna start the system up to begin with,
because I don't wanna risk damaging other things if, in fact, that socket is trashed.
So, without further ado, let's get to it, I hope you will stay with me.
By this point, you already know that Star Forge Systems built some of the coolest looking gaming
PCs on the market. As a huge RuneScape nerd, this one in particular blew me away. And this
same attention to detail carries over into their wall art and desk mats. You see, Star Forge wall
art is UV printed on high quality acrylic for this gorgeous finish, and you can snag it in sizes up
to 16 by 24 inches. Some are even embossed, like these for Dragon Light and Clouded Gates. They
look fantastic on any wall and come with their own friendly mounting strips. And as for the desk
mats, they practically speak for themselves. They're massive, ultra durable, and ship with
various art from your favorite shows, games, and more. I've personally been repping this old school
RuneScape world map. Would you like to know more? For all of this and more from Star Forge,
be sure to click the link below to start shopping today. Hello there, and welcome to Fix or Flop.
In this series, we attempt to fix broken computers like this one for free, so we don't charge for
replacement hardware or labor, and that's thanks to your viewership. The fact that you click on
these videos gives us a kickback on the monetization side of things, and we don't offload
that cost to the owners of these rigs who are gracious enough to drop them off and allow them
to be featured in videos. So it's a really cool thing that we've been running now for six seasons,
and I hope to continue it for several more. Not wishing it well on PCs, obviously, but if
something does go wrong, you can fill out a form linked in the description. We'll do our best to
get back to you as soon as possible. Now, like I said, since we suspect a pretty messed up socket,
I'm not going to bother powering the system on for risk of damaging anything else if that hasn't
already happened. I'm going to remove the AIO block here, the CPU as well, and check out those
pins. And I will say, this is easier said than done. It's a very densely packed rig. It looks
very beautiful as a result, in my opinion, but we have a lot of wires to deal with. See if I can
move these out of the way. I really like how he's cable managed this. I'll remove these retention
screws one by one, and we can reveal the CPU. Let's see what we're working with here. It is a
Core i9-10900K. Okay, so top of the line for Intel 10th Gen. Should be noted there was sufficient
thermal paste here, maybe a bit more than needed, but a little more is not going to hurt anything.
I like to take q-tips soaked in isopropyl alcohol to clean up the surroundings of these chips before
removal. All right, and here we go. The grand reveal. Oh, yep, we've got a few issues with
this socket. You can see, especially on the upper side of the socket, there are several places where
pins are severely bent, and I'm hoping that is the extent of the damage. If any of these are broken,
again, it will warrant a full board replacement. I don't have the tools, nor frankly the skills,
even with my own physical hands. I don't even think I keep my hands straight enough to re-solder
missing pins in a socket this fine. I'm not even sure if it's a viable repair,
even for board repair specialists. They might even just tell you to replace the board outright,
which is what I would do and what we have done in situations where pins are missing.
But again, though, it doesn't look like any are. I think many are just shoved in one direction or
another, and for that matter, I'm not entirely sure how just repasting a CPU causes this much
damage. You shouldn't even have to replace the chip. You shouldn't have to remove it from the
socket at all. You can repaste a chip with the CPU fully, like, locked in the entire time.
It doesn't look like anything was dropped in here because the bent pins are kind of all spread out.
It's not like they're all in one big cluster. I'm going to try to keep the board in the case
without disconnecting anything else here. It's just going to add more labor later. I prefer to
keep things simple, so I'm going to remove the socket cover, a little retention mechanism here,
and I'll get out my trusty sewing needle for this job. For a fine socket like this one,
I found that a sewing needle is among the best cheap tools you can use to fix bent pins. It's
small enough that it doesn't interfere with other pins in the process, and I will attempt
to demonstrate that now. I apologize in advance for the shadows, the poor angles. It's just
not a good way to get this on film while I'm bending. Just note that the fine tip of this
sewing needle is going to aid in the recovery of the socket massively. I'm also going to be
very careful while I bend because if any of these snap in the process again, that's pretty much a
guaranteed board replacement. You can see this one off to the far left, I've almost straightened out
already. It's very close, and I'm trying my best not to interfere with any of the other pins around
it because they all are situated correctly. This is just very tedious. You can see occasionally the
needle just flies in a random direction. It's important not to apply too much pressure for
this very reason. I think that's going to make contact now. I'm probably not going to bend it
too much more again for risk of it fully breaking off. It looks like this one near the corner is
bent all the way backwards. Yeah, this is not going to be fun. I was wondering why there was
a gap near this corner, and it's because this pin was pulling a 180 on us. I'm actually going to
switch over to my microscope for this next part. You can see fingerprints there. So it does get
up close and personal, and I'm going to use this to determine if a few points I'm suspicious about
in the socket have broken off pins already. I can't find a couple of them, and I'm unsure if
they're just bent back very aggressively or if they're just outright missing. Also, yeah, my thumb
is pretty disgusting. The two areas of concern... are we missing a pin? Nope, that's just really bent
out of shape, but that tells me all I need to know that is saveable. How about this other one here
in the corner where we were working? Yeah, one of those is still very badly bent. Looks like it's
bent toward the bottom. So I'll have to be very careful again not to hurt any of the other pins
around it. This is the problem with these kinds of sockets. Eight hours later. Okay, maybe not eight
hours later, but you can see after some time the socket definitely looks better than where we
started. It's not perfect. It probably will never be at this point since the metal has been slightly
compromised around the pins that have been totally bent backwards, but I do think we have sufficient
contact here for a post if, in fact, this is the only issue with this rig. Just checking the
underside of the chip. All looks good. I'm going to go ahead and install it back into the socket.
We're going to tighten things down. I'm not going to reinstall the cooler just yet, but I want to
try for a quick post before we go any further. Not sure if, again, this is the only problem with
this rig at this point. Don't want to forget about all four of his dims. I pretty much want everything
exactly as it was when the system first arrived, save, of course, the socket. And here we go. This
is the first time we've powered the system on in this video. I'm curious if our pin bending skills
have paid off. If not, I might give it one extra go, but beyond that I think we're just going to
replace the board. Let's see what happens. Okay, so far so good. Man, does this thing look pretty
when it is all lit up. Love the way this was done. Come on now. Give us something. Come on.
Is this it? No, maybe just because we don't have signal. It went black. All right, that really
sucks. Oh, actually, you know what? Debug LED there is telling us that it's posting. All right.
Hey, I just had to be a little more patient. Okay, so it looks like the socket was the only
thing wrong with this entire rig. I mean, we're getting picture out through the graphics card,
so that seems fine. Looks like his BIOS was reset. Maybe it was just never set up to begin with,
because he's running on a base 2133 frequency right now. So we'll enable a couple of things
in the BIOS. We'll make sure those temperatures look good once we reconnect the pump entirely.
I've got it sitting on the CPU, just with a couple of screws, but it's not powered or anything.
So we'll go ahead and turn this back off and finish that up for him and just run a few more
checks to be on the safe side. We'll drop in some fresh thermal grizzly cryonaut. Make sure his
block is fastened this time, but not too tight. Try to get cable management as clean as he
originally had it. And let's try this one more time. So cool. Love the way this looks. My son's
sitting here. Books, what do you think about this? It does look cool, doesn't it? Yeah,
the owner did a really good job with this. So we're just going to make sure that we have one
more post. We'll hop into that BIOS, configure a few things. Also make sure that his temperatures
aren't all out of whack. You can see that's the debug LED I was talking about earlier,
actually a doctor debug to accompany it. There's our post again. You can see we have several drives
detected. I'll make sure that these all line up with what the owner described and that none are
missing. Also 64 gigs of DDR4 in this rig. We'll quickly enable XMP. It looks like 3,600 megahertz
for this kit. Can also double check CPU temperatures. 31 degrees Celsius is very
healthy. This can also be cross-referenced with his AIO, which conveniently is set to
show liquid temperatures currently 28 degrees Celsius. Nothing wrong with that either. Also,
this is rotated 90 degrees because I actually oriented the block slightly differently than
he did. So there wasn't so much stress on these tubes and that can be very quickly rectified in
software. Lastly, it does look like we have Windows installed on his Samsung 970 Evo Plus.
It's a 500 gig NVMe. Let's go ahead and try for that. We'll just press F10. That should
reboot the system. I don't think we'll have to touch anything else. It's very nice where,
and I don't want to jinx it because we haven't actually fully booted into Windows yet,
but so far it is nice that we haven't had to replace anything hardware-wise in this rig.
Most of it is fairly new or at the very least fairly expensive. Just goes to show that with
a bit of diligence, you can save expensive hardware. Not sure how long the owner had
this rig up and running before it was repasted and the socket was pretty messed up, but there
we go. That is it. That's all we need to see. Beyond this, I mean, we could run some stress
tests, but I don't like diving into operating systems, especially with potentially sensitive
files and things exist, unless I absolutely have to. So far, the graphics card is not
artifacting at all. This is kind of a best case scenario. We haven't had to replace any hardware,
which is a huge win. And I'm fairly confident that the socket surgery, so to speak, we performed in
this one will stand the test of time. I didn't notice that any of the pins were on the verge
of breaking. We've had that happen in a few other instances. And I've told those owners
that if they do have boot problems in the future, we'll address it probably with just
board replacements. But this one, I think will hold up as long as it's not being slammed around
during transport. Once it's dropped back off, I've noticed with the rig just sitting here
that the CPU is running a tad hot. The graphics card would normally equalize thermally around 40,
45 degrees Fahrenheit under air. So I'm not totally concerned there. And we're getting
plenty of airflow from the front of this case, because this is again, more of the like airflow
style H5 from NZXT. But you'll notice that our CPU temps, at least according to this Kraken AIO
are somewhere in the mid to high forties. It's abnormal. I just realized one of these fans is
not spinning. This happened after I was tampering with it. So let's check connections. It looks like
this is for, yep, right here. Piece of cake. I'll just get this reconnected. Okay. And now
we are good to go. It should also help with CPU temperatures. It's starting to make more sense
now. I have powered this on over and over without issue. It loads into windows every single time.
The RGB all works, the fans work. Again, I'm pretty surprised that we were able to pull this
off given how bad the socket was when it first arrived. You have to be very careful, very precise
when using something like a sewing needle on a socket as fine as a modern Intel one, even older
Intel sockets. I mean, they aren't as densely packed, but they are still so fragile, especially
with age, even a slight bump in the wrong direction can snap one or more of these off. And once that
happens again, you've got to replace the entire board. So I was willing to at least hear this
thing out, give it a shot. Seems to have paid off. And speaking of paid, we definitely would
have paid a pretty penny for a replacement board like this one. It's very difficult to find Z
series motherboards that are older and in really good condition. And I think that's what keeps the
prices up, especially on Intel side. So we saved ourselves a lot of money potentially by performing
the surgery that we did. And I do have confidence that it will stand the test of time. Worst case,
it doesn't. He brings the rig back to us and we replaced the board anyway. He'll be taken care of
regardless. And with that, if you again have a broken system like this one and you'd like a
chance to have it fixed in a video like this, it will cost you $0 and 0 cents. If you're chosen,
be sure to fill out that form linked in this video's description. Speaking of down there as
well, you'll find a link to our new YouTube channel called Salazar's cars, where I'm
currently in the process of rebuilding a crash damaged Audi S5. It's a bit like fixer flop,
just at a much larger scale, frankly, a scarier scale. So you want to see me make a fool of
myself over there. Be sure to get subscribed for a chance to also win this beautifully themed
Star Forge RuneScape PC. That one's only running for a couple more weeks as of time of publishing
this video. So be sure to hop over there if you haven't already. Thank you again so much for the
support. Thank you for the viewership. Consider liking this one, subscribing and sticking around
for the next. My name is Greg. Thanks for learning with me.
