Let’s Rebuild this 1931 Atwater-Kent Model 72 Radio (The Beginning)

Amateur Repair Time
257 followers
822 Video Views·Feb 16, 2026
Check out our Patreon page, for all of our channels. Contains outakes, concise arcade repair tips, bloopers, repair FAILS, Audio youtube wouldn't allow us to upload, and much more!
https://patreon.com/JoesClassicVideoGames
------------------------------------------------------------------------------------
Ladies and gentlemen, welcome back to Amateur Repair Time.
We are going to work on an Atwater Tent floor model console radio from about 1930.
I haven't worked on a radio here in a while on the channel, so I figured we'd
start on this one now. If you are a long time viewer of our channel, this radio
has been sitting right there the whole time I've been running the channel. I've been
fixing things on this channel for about two and a half years, something like that,
and in the background I've got several radios. So my goal was always to fix all of these,
and that's still my goal, but when I set all this up so I'd have a cool backdrop whenever I was
working on stuff here on the bench, I set up several radios just so it would look good in
the background. And my plan is to fix every single thing in the background. So the other day
we were working on this phonograph, well a few months ago we were working on that stereo
or phonograph, well I just said phonograph, we were working on that record player,
record changer, and when I was all done I thought, you know, I hate to sell this thing, I kind of
want to keep it. So I thought about it and I figured, well, I can put it over here on the
side because I had some room. And then a couple weeks ago I was working on this phonograph,
and when I was done, it was a Meteor phonograph, and when it was done I thought,
I really like this thing, I hate to sell it. I've got a whole bunch of broken
items and so my plan is to fix them and sell them if it's, you know, something that I don't
want to keep and switch out for stuff. So eventually, hopefully I'll have everything
working and when I fix something I can decide if I want to sell it or replace something that's
working and sell it. That's my plan. So I wanted to keep that and so I thought, well, I got to get
rid of something if I'm going to keep it in here. Now I've got other rooms with other stuff in them
too, but this is, you know, this is where I'm displaying everything. So I'm trying not to have
stuff everywhere, especially if it's not working. So I have picked up a ton of these radios
over the last 10 years or so. They pop up all the time and if I see one and it's cheap,
usually I'll buy it. If it's, you know, I've got a storage building, so I've got plenty of storage
space for things like this, but I hate putting things in there. If you put things in storage
and I don't, I own the building, so I'm not renting it or anything, so it doesn't cost me anything,
but if you put things in storage, a lot of times it doesn't come out of storage. So I hate buying
things and putting it directly in storage. So since I have my store, I'm able to sell some of
this stuff in the store. I've sold fans, radios, phonographs, all kinds of stuff in there. So
I kind of need to get rid of some of them if I'm going to keep other things, right? So I started,
I was thinking about this. Do I really want to keep this phonograph? Because I've got
another one in the other room. I've got a Brunswick I've done videos of here on the channel
and I've got an Edison, you know, which plays different discs.
So I've got a Brunswick and an Edison already. Then I've got this one and I've got a bunch of
table models of it. And I'm not saying any of this to brag, by the way, all of the stuff that
I buy, I buy very inexpensively. And most of the stuff that I like is the stuff that's not high end
and super valuable. You know, a lot of people, they chase after the rarest of the rare and the
real high end ones. I don't like that. I like the ones that were just the normal ones. Now,
when you get into these radios, this is an Atwater Kent. All of those were pretty expensive. Those
were pretty nice radios back in the day, but nowadays they're not really worth much. So you
can pick them up inexpensively. So all that to say, I've probably paid $50 for this thing and
maybe even less. I don't remember specifically. Also, I have three, very similar to this. I
and I've got two model 70s and it's the type of thing where they pop up online and
you know, somebody wants 30 bucks for it and it's on my way to work. I can just swing by there and
pick it up real quick. And you know, why not? So I had it sitting over there and then there is a
Philco there, which is a post-war. And then this one back here is a Kennedy.
I really liked that one because it's a little weird. You don't see those too often.
So I'm saying, man, do I want to save the phonograph or, you know, why would I have
two phonographs? You know, I've got another, I've got a Brunswick that plays the same records.
Why would I keep that? And then I started thinking, well, I've got a ton of radios. So I've got
one, two, three, four right here, console radios. I'm thinking of other rooms. I've got five,
six, seven, eight. That's probably it. I've got eight four model radios and I had two phonographs.
So I thought, well, I could sell one of the radios and keep the, keep the third phonograph.
So that's what I've decided to do. So then it's okay. Well, which one do I want to sell out of
them? And I think this Atwater Kent is the one I want to sell. Not, there's nothing wrong with
the Atwater Kents. They're great. They're literally great. Um, but I, you know, I,
I did that whole video series on the, um, majestic radio that I had, and it's kind of a similar era,
similar vibe. Uh, it was very fancy and nice, you know, and I'm keeping that one,
especially since I spent so much time on it. So I'm going to sell this one. Um, my Atwater Kent
model 70, one of them I've got, and they're, they look very similar to this. Uh, they were all made
about the same time, 1929, 1930. It's like this, maybe a little bit tall, a little bit longer.
It's not a, this is called a tall boy. I think it's, they're more of a low boy. It goes down a
little farther. Um, and one of them has the legs chopped off. The legs are only like five inches
long on it and somebody cut them off. So that one is probably going to end up being a parts machine.
Um, and we'll talk about that again later. So that Atwater Kent I'm going to sell. I'm
going to fix it up. I'm going to sell it at my shop. I'm contemplating how much, I think maybe
250, 300 bucks or something like that after I get it all working. So we'll see, but we're on this
series here. I'm just going to take a few videos, but I'm going to hopefully get the thing up and
running nicely and get it out to somebody's home that can enjoy it. I've got eight of these radios
that I can think of here. And then I've got one, two, three, I've got four or five in storage too.
So, you know, I got, I got to thin this out a little bit and you can't get new ones if you
got the old ones. I guess you could, but, um, now this one is the Sears Silvertone that we did a
while back and we completely fixed it up and I really kind of like that one. So I'm going to
hang on to that one. Um, and then the Kennedy I really like, I want, I think it's always looked
real cool in the background cause it's so screwed up. So, uh, I definitely want to fix it up.
And then this Philco here, uh, you know, it's got the record player in it and everything.
I'm just keeping it cause it's a little different than the other ones. So maybe if I get that
record player working well, we'll get rid of this Columbia here or something, but I don't know,
we'll figure it all out. So if you look in the background, I've got this little radio here that,
uh, I got from, uh, Kevin or Shane. Um, I got, and it works. I've got this, uh, Jefferson
clock here. It works great. We fixed it. I've got this bull of a, I think it's a bull of a radio.
It works great. We've got this, was that a Philco as well? Maybe that's a Philco, um,
that we fixed up. It works great. Uh, there's a Timex watch up there. I got from Tad. We didn't
mess with it yet. The clock above it works. The clock right there works.
The channel master radio works. The little, um, um, what do you call those steeple clock or
whatever? That's an electric clock. It works. This is like a Russian clock. It works. We haven't done
this one yet. Uh, we haven't done Gumby yet. The little fan, it works. We did video on it. The
Columbia, it works. The, the, uh, phonograph, it works. The Silvertone, it works. This clock
we worked on, we haven't worked on either of these yet. Fixed that, fixed that, fixed that,
fixed that. We haven't worked on those yet. Uh, we haven't worked on any of those yet.
Fixed that and fixed that. I haven't done either one of those yet.
And then if you look over here, fixed, fixed, fixed, fixed, fixed, fixed. And I think that's
it. I've been working on those, but they're not good to go yet. Um, we also did a video fixing
that. Uh, I did a video showing the tube box. There's another one over here. So, you know,
I'm trying to display all of the stuff that we've worked on. Um, there's a couple other things that
I've fixed and either sold or they're in the other room or something. So anyway, that's where we're
at. So this Atwater Kent is next up. I'm finally going to work on it and then sell it. Now, it
might end up where it's like these two, where once I get it fixed, I can't sell it because I think
it's too cool and I keep it, but hopefully not. So let me show you what we're starting with and
then we'll, uh, we'll go from there. So here's the back of it. It's got a pretty nasty water
stain there from something. I'll bet somebody did that and really regretted it afterwards.
They probably got in all kinds of trouble. It is a model 72. Okay. So around this time,
Atwater Kent was running things. They were selling a lot of these and, uh, it was just
an incredible company and they were making several different chassis that could go in each cabinet. So
this particular one usually had the same chassis. I've been researching it a little bit. This is a,
uh, Atwater Kent model H chassis. So that's what we're going to be working on.
And then there would be a speaker that hung down here
that is missing. See those two hooks up there? The speaker would just hang in the machine
and then the, uh, plug would come up here, plug in there. So, oh yeah, I got a picture of it there.
And it was so you can move it and remove the speakers, get rid of a bunch of weight out of it.
And that damn thing probably weighs 10, 15 pounds. Um, and also they, um, they had different
configurations and different designs. So some of them were like battery operated sets,
excuse me, and it would use a different speaker. So it was all kind of modular. Like they would,
they would make the cabinet and the cabinet would have a model number model 72, for instance,
in this thing. And then they would make the chassis and the chassis would have a model number
and it just kind of depended on your setup. So the ones that I've got that are model number 70
that are a little different. I think there's about five different chassis that can go in the thing.
Um, and they were just rocking and rolling. I mean, making a bunch of these.
There's a bunch of nice pictures online of the factory in 1929. And, uh, it reminds me of the,
the, uh, pinball factories from back in the 1960s and seventies. Uh, what a lot of people
don't realize is that a lot of the people that built these radios, for instance, were women,
almost entirely. So you'll see just rows and rows of women sitting at tables,
putting these things together and, uh, even running the machinery and stuff. I'm not trying
to be sexist. I'm just saying that, you know, you wouldn't necessarily think that, but, um, it,
there's a picture online I saw of the Atwater Kent factory from 1929. And there is a lady running
the, like a drill press drilling the holes in these, uh, these frames and these chassis and
stuff. So it was really cool to see stuff like that. Um, and you know, doing the wiring harness
and fitting all the parts and these things were built by women. And then, you know, they would
have a, a cabinet factory or a cabinet area of the building. And a lot of times you'd have guys
working in there. Um, but a lot of the cosmetic stuff that women did and a lot of the assembly
women did, and it's, you wouldn't necessarily think that, but the factories were full of women.
Um, and I don't mean like they were fairly represented. No, it's like 95% of the people
doing it were women. This, this strange, as weird as that seems, I don't know why that seems weird,
but it just does. Um, it's just interesting. So all I'd have to say, I think it's time to
pull the chassis out of this thing and, um, see what we're working with. Now, if you look at the
front, all of that stays with it. The face plate is mounted on the chassis. So the whole thing just
slides off that shelf and away you go. She's a healthy one. Heavy. You know, they just sit in
there on that shelf. I don't even think there's any way to fasten them down. I think they just,
oh, they always sit in there. So whenever you got to move on, um, you kind of have to remove this
to move the thing. Um, so yeah, here's the face plate, which is actually metal and it has this
really nice escutcheon. I don't know how you pronounce that. That water can't super heterodyne.
They were bragging about it at the time. I'm gonna have to be very careful trying to dust that
because the, the silk screen could come off of that really easy. Uh, three knobs. One is broken.
That's a shame. Plastic knob. I've heard that these sometimes have problems with the pot metal
that these shafts ride on and I'm seeing nothing turning the tuning thing. So I'm
probably a string or something. You know, it's not turning this either. So I guess,
yeah, there's probably a string screwed up. Uh, it almost looks like though,
that it's lined up with it. So why is this turning? But that's not.
Then we've got these, I've seen these before, um, on that Majestic. It had something similar.
When these came off there underneath it were coils. One, two, three, four. I think there
were four on the Majestic as well. Like I said, I think this was 1930. Okay, let me turn it around
so we can look at the back. What a piece of work. Type H. Now I believe there were two Type H's
and they change at a certain serial number. 5863878. So there we go. Keep getting that
light right behind me. Let me see if I can get the light. That's a little better. Okay,
so let's see what we're working with here. This, I suppose, was the power cord. Fairly heavy duty
and brown, like a brown cloth. They've got it all daisy chained up. So we're gonna get rid of that.
We've got one, two, three cans that probably have caps in them or something similar.
We've got a some kind of winding right there which I guess is a coil or a choke or something
and then the same thing here. I've never seen them quite like that. We've got a blue tube. I don't
think I've ever seen a blue tube either. Let's see if the right tubes are in the right spot.
UX245 and this one is a 45. RCA Cunningham. I guess that's Cunningham. It's just a really
strange thing. Radiotron. It's a 45. I would imagine this is probably the same.
It's 245. I don't see the marking on the tube itself but it looks like 45. Well, no, actually.
So they're both supposed to be 245s. Look at the plate or whatever inside of that. So you've got,
you see the setup and you look at this one. Is that the same thing? I don't know.
It looks a little different. I guess it could just be different companies.
Okay and then we've got a 280. The other ones say UX245. This one says UX280.
So I guess that would be an 80 and it's missing. Well, that's what's wrong with it. We just need
another tube, right? Here's our tuning condenser. Moves very easily. I suppose whatever string
moves it is broken. Transformer. UI227 which would mean this is a 27.
Arcturus 127. All right. Like I said, I don't know how these come off. It looks,
it feels like you might just be able to pull them off but I don't want to force it.
I've got these four. There's probably, there might be some caps in there, maybe. Date received
December 4th. Does that say 20, 1920? Or is that 30? Find of radio. I just can't read it.
Received from. Amount allowed. Cost of repairs. Wow, I wish I could read it. Does it say 695?
Amount allowed. I just can't read it. If you think you can tell what that means or can make that out,
leave the comments down below. That's pretty interesting. We'll keep that with it.
Whatever that says. National Union Y and that's a 27 which is the same as that. That was a 27.
Okay, now we'll go into our cans here, if I can. No pun intended. Are those just a slip fit?
Yes, they are. So these, I think, are just to reduce interference. I don't know what that
means. GE General Electric and it's a 24A. This one here, there's a hole in the top but
there's no, um, is that the anode? No anode connection. Tube was barely in there. I guess
they're marking that that's tested in some way and I guess it does say Cunningham. Cunningham
Radiatron 27. Okay, so this one has pulled up a little bit. Looks like maybe it's bent.
I'll get that wire off the cap without tearing it up. Come on. Yeah, it's bent a little bit.
These crazy kids. Let me see if I can bend that back. It's a 24A as well. We were able to
bend it back. I didn't bend that part. I'll get it to bend this part back. It's got to be real
straight or it won't slide down over the little receptor there but that's okay. That one was
pulled all the way up out of there. And finally, probably another 24A. 24A. Lots of RCA tubes in
it. None of them were Atwater-Kent tubes but I don't know if Atwater-Kent even made their own
tubes. I guess we'll find out. Uh, this I guess would be a big timey switch. I don't like the
looks of that. Looks like some kind of spacer that went on something. Hmm. I hope that didn't
break off or something. That's the other knob. Maybe a tone switch or something. It feels like,
it feels horrible. It feels horrible. How does the, how does that move?
Well, I don't completely see what's going on there. I see that shaft is moving but I don't see
that end of that is hooked to that I believe. Maybe there's a set screw or something broke.
Hmm. Well, we'll have to dig down into that but I feel confident we can fix it because like I said
I've got three of them that are very similar. Okay, so uh, that is, we took the tubes out.
I'm gonna carefully put them away and then let's turn this thing over and take the plate off the
bottom of it and see what the underside looks like. So this is the plate. I've gotten all of the screws out.
They actually all have washers on them except for these first two. I'm thinking maybe what's going
on is they had to replace them at some point and so um, they used screws that were too small. That's
why they hadn't used the washers. Um, if they were the right size they might fit. So maybe they just
had a couple of them left and they put them in the front where they couldn't get to the washer.
I don't know. Maybe. All right, so I haven't looked yet. What do you think? My guess is going to be
it's never really been worked on. I mean, I know I just said that it looks like they've taken the
plate off before because the washers don't all match. Some are square, some of them are octagon
or hexagon. Um, and obviously they've messed with the tubes. Um, and this thing is almost 100 years
old so you'd think that at some point they would have messed with it. But let's see.
Oh, it has that smell. Oh, there's something on the bottom too. There you go. Read carefully.
Let's do this first. Atwater Kent Manufacturing Company does not recommend or advise any changes
to the wiring of this set. Atwater Kent dealers and distributors should be consulted regarding
any defects, adjustments, or change. Under no circumstances should any wiring change be made
without first disconnecting the plug from house current circuit. Tests of any character which
require touching of wiring should be conducted only by experienced persons and with caution
because the voltage is present. So they were running into stupid people as far back as 1930.
That fits my personal theory that the world has always been full of a lot of stupid people. But
okay, let's move right along. A lot of people would say I'm a stupid people.
All right, so obviously we are unplugged from the wall.
Yeah, I don't like some of what I'm seeing here folks. So I don't like that there's tape on them,
but what in the hell? That's like a rubber, that's not tape. The end is tape and there's
some kind of rubber on the wire. And if you look, there's two wires going in and then on that end
there's one wire coming out. Oh great. Oh great, they've went ahead and modded it for me.
Boy, I love when they do that. Luckily, great schematics exist. Okay, so here is another wire
that's rubber that's just falling slap the hell apart. So we're going to have to ignore Atwater
Kent's instructions and replace at least the rubber wiring. There's not a ton though. There's one,
two, three, four. And it kind of looks like what they did was where they tie things together. Like
right here, they have two wires tied together. They put like a piece of rubber wire as an
extension and then tied it together again right here. So what we'll do is we'll just replace that
whole thing with, you know, better wiring. I don't know though. We'll try to find out where,
if they've disconnected it somewhere or something, or if that's how it originally was.
Like this, so this wire here, did it come down and attach to something around here?
It doesn't look like it. So two of these wires, yeah, we might be able to reroute it. Now it
said don't change the wiring. One of the wires comes from right there. Okay, that's this one.
And then the other one comes from right there. Yeah, we'll have to think about that because,
I mean, if we're doing that, couldn't we just run that wire from there to there and then run
one new wire to where that one's going? I know some of it is, it causes interference and things
if you reroute the wires, but it kind of looks like they've hacked some of this. I'll have to
look at some pictures and see if that's how it originally was. I personally don't think it was,
but so one of, like this one, this little doodad, one of the wires comes from there and I don't
understand completely what's happening there, but we can figure that out. Oh, it looks like they're
running under. Yeah, see they go under. Oh, and they're coming up here. Okay, so yeah, so one of
these wires is connected to one of these wires, but it's connected down here and then runs to
here. So, I mean, couldn't we just clean up much of that mess? We could even use the original wire.
Just saying, I don't know what they were doing. I know what I'm gonna do. Look, we'll see how it
goes, folks. I would rather it be like that than have connections on the fly like that, you know,
because like this wire has to join this wire. If they're doing it right there, let's just pull it
apart and look. Hopefully, they soldered it. Yeah, see, so if they're connecting it right there on
the fly with solder, we'll look at the schematics. I mean, maybe it connected right here or something.
We'll just have to see, but if they're just connecting it on the fly, instead of me replacing
this little piece of wire, I mean, it would clean it up a lot if we just connected it
point to point up here and then down to where it goes. I think I'll probably do that, but we'll see.
And then we've got the other one that's the same. Okay, so this connection and this connection
both do all kinds of crazy stuff but end up connecting to these two sockets.
And then this other one here, didn't we have another? Oh yeah, these two here
are coming from this socket up to the transformer, so that'll be easy enough
to just replace that with nice new ones. Okay, here is where the electrical cord came in.
The grommet's still kind of decent. That's cool. It just came in attached there. All right,
here is yet another one that they have extended. What are you doing, people? What are you doing?
Why would you do that? See, like I'm thinking, can't we just reroute this down here and lose
the extra piece? To me, it doesn't look like they're using a lot of concern about routing.
So if this doesn't go like that but goes like that and you lose that extra piece,
I would much rather have that. Or worst case, we'll just replace the whole wire.
Yeah, I've never really seen one quite this set up. And yeah, this is pretty new to me.
So are these caps? What is on the other side of that? Yeah, those are caps. That's like on the
Majestic. It had some stuff like that. So inside this case are caps, I think.
Inside this case would be caps. Caps, caps. So one, two, three, four, five cases of caps.
A bunch of resistors. Oh yeah, okay, so that resistor is tied to there. I assume those are
resistors. They look like resistors. We'll test every bit of this with the schematics.
I've never seen any of this though. I don't know what that is.
That's an adjustment. Let's go back the other way. So that's a capacitor, basically. That's
an adjustable one, not an electrolytic or anything. Wow, okay. So yeah, very vintagey.
That's a cap. Yeah, so this one has a big case on top of it. This one has a big case on top of it.
That's obviously the transformer. That has a big old case. Pretty crazy. Okay, this one, this one,
and this one do not have a case on top of it. And it would be interesting to see like what this is
and this is. I mean, I've never seen anything like that. Here's another one, here's another one,
and another one. So that'll all make itself apparent whenever we start looking through
schematics. Yeah, so it doesn't look super hacked up to me. Looks cool. They obviously
have hacked a little bit of the wiring, even though it said right on the case, don't do it,
don't do it. But they did it. So we'll repair some of that and get it back how it goes. So I think
next up we have to get the copy of the schematics and see if we can make head or tail. All right,
so I did a whole bunch of research and learned a little bit more about it. I can see right now
this is going to be another one of those ones that whenever I'm done, I don't want to sell it,
but we'll see. I believe I kind of came to the place where I like the older stuff better than
like the, the post-war stuff. So I ran into the same thing here. Like I didn't want to get rid
of the phonograph, you know, and I didn't want to get rid of the silver tone, but the ones with
record players built in, I'm not as into it. There's just something about these being a
hundred years old and they still work that I think is cool. So I read all kinds of information about
this and I think what's going to end up happening is we're probably going to do like a full,
a full repair on it. We're probably going to go all the way on this one.
That's mine. That's what I've decided. And then if I do that, I probably won't want to sell it.
So there's just stuff like, for instance, the cabinet has that bad water stain on the top,
which means I'm going to have to refinish the top, which isn't too big of a deal.
And then after looking into this, you know, none of the caps are exposed. They're all in these cans.
So to replace them, you have to melt that out, which is going to be quite a bit of work,
which I don't mind doing. But then again, after I'm done, I'm not going to want to sell it because
did all that work on it. So anyway, this apparently is the H2 chassis. There's also an H1,
obviously. And the main physical difference that you can see easily is this antenna trimmer that
we were messing with earlier. That basically changes the antenna. On the H1, it doesn't have
that. And you can tell which one you've got too by the serial number. So there's just slight
differences. So I looked and there's not that many videos on Atwater Kent radios,
I guess, just because they're so old, but they are very nice radios.
There was a really nice series by a gentleman named Greg. I've subscribed to his channel now.
It's on my list. If you look on my channel here, it'll be one of my subscriptions,
where he did an Atwater Kent 55, which was probably their most popular chassis. It's a
little older than this one. And it was in a very nice table, like a desk almost that he had.
And he did just a beautiful job fixing that thing. Did a complete restoration. I never call
my stuff restorations because they don't look new when they're done. And I'm not trying to get them
perfect. It's just, it's beyond the scope of what I'm capable of. So that's why I call it
amateur repair time. I'm not trying to be an expert on it or anything. I just want to get
it where it's reliable and it works well. So I've watched a lot of his videos on it and
they were a little inspiring because he did a really nice job on his. And I can see by this
one that it's really not that far gone. So if I do just a variation of what he did, just if I get
some of what he did accomplished, this should be a pretty nice radio. I also found a lot of,
so there's hardly any videos on YouTube about repairing one of these chassis. There's none
on this chassis, that Model H. There's a few of the Model 72 radio, but it just shows it working.
I watched another gentleman who made some great points too. I guess that would be our fallback,
but we probably won't end up doing that. Basically he was making the point that
these are sealed, so no moisture can get in there. So usually they're just fine.
I think that's probably a good point and that's probably true, but they are 100 years old and
I've just worked on so many arcade games where old capacitors cause problems that I don't really
want to chance it. So I'm going to try at least to open up those cans and replace them.
I don't usually restuff the cans because I don't really, I'm not that concerned with if it looks
exactly vintage. I'm not trying to fool anybody into thinking that it hasn't been worked on,
but the thing with these cans is it's a pretty convenient way to mount it and there's not really
another convenient way to mount it without the can. So I would have to take this can off
and then put a tack strip there, which by the way is not the easiest thing in the world because you
have to melt it to the pan. So you have to make sure you get a really good connection on it.
But this is a very shallow pan. Look how shallow that is. And then you saw me just take the plate
off. You really don't have a lot of room there so you got to be careful the way you do it. I
watched Greg doing his and there's a lot of room inside these cans so you can easily put the caps
in there and it's just a clean way to do it. So I'm going to attempt that and the filter cap is
actually all the filter caps in a big can on the top. So I can't really do much
without taking out all of those caps. I saw several people say that the way they do Atwater
cans is because they're in these cans, they just bring them up slow and try to reform the
capacitors. One gentleman said he brings them up slow for about a day. It takes him about 24 hours
to do it and then whenever it's done usually they work pretty good. There's also a quality
cap in here somewhere. Somewhere on the output. Somewhere there's a quality cap and they said
that when it goes bad you kind of lose all your treble. And so what people typically do is they
just cut it loose and it gives you your treble back. But whatever, we'll figure that out later.
I'm sure we'll probably end up with a multi-video series on this. So here are the schematics.
There's really not much reason to go over them right now. Oh another thing I should mention.
You may have noticed, I don't know if I mentioned it yet, but it's missing the speaker. So it's a
model N speaker which actually I confirmed that it's a model N speaker. I have one of those
speakers in one of my other two that I've got and I've ordered another one. So I don't want to,
I don't like swapping parts off crap. I don't like, I don't like taking two to make one. I've
never liked that. I don't like it with arcade games and pinball machines. So I saw a good deal
on a speaker. I went ahead and ordered it. So that's not that big of a deal. You got to remember
they made a ton of these things. I mean a freaking ton of them. So it depends on how hard it is to
get these freaking cans open. They come, you can just remove them from the chassis pretty easy but
then they're soldered together. So I might try to take a torch and get them apart with the torch.
Is that rust or what are we looking at here? And see that it does look like maybe these have been
in moisture. You know I don't see, it's not really rust but you know I guess it's just
a hundred years old and that's how it goes. Also these resistors, there was a gentleman
who was mounting his behind the resistor. It was a real cool look whenever he had to replace them.
Look at this. You know that's been added too. You can't really do it like that because
you're leaving the other resistor in series like in parallel. You can't do that. I guess if they
both add up to the original value it would work for a little while till the resistor kept failing.
But it's such a clean chassis. I'm just, I kind of like and you know it's got this stainless steel
chassis. I kind of want to just clean it up and do it pretty nice and then keep the damn thing.
I've done it again. That's three in a row. I'm gonna end up with a hoarding problem here people.
So I've got a speaker coming and here's the other, here's another sheet that we've got.
This is showing us the bottom of the chassis that we are looking at at the moment.
And the interesting thing is it shows you the capacitors. So it shows you the caps and then
up here it tells you what's inside and the values. So the the notes on these are extensive
and very nice. I don't know what I'm going to do on some of these like the 0.075. Why is that not
just a 0.1? Yeah so I'll have to decide on some of that a little bit. But that's what we're looking
at. So I'm going to start that. I guess this will be the start of a series trying to repair an
Atwater Kent 72 H2 chassis. Which is basically the whole thing you know. I mean there's nothing
to the cabinet. We remove the whole chassis very easily and with the speaker we can set the speaker
there and plug the thing in and that's I mean there's nothing. It's literally just a wooden
cabinet. So this is the whole shebang. So I guess on the next video I will remove one of these.
This might be a good one to start with. Isn't that the one that the AC comes into?
No this one. We'll remove one and see if we can melt the thing apart or use a soldering
torch or something to break it apart. See what's in it and then see if we can cleanly
swap some new caps into it. And we've got one, two, three, four, five to do
and we've got the big can. That's the electrolytics and they're not all electrolytics.
Look how they've done this. Filter condensers. Numerals and circles shown on wiring diagram
indicate connections upon filter condenser terminal block. These numbers are also shown
upon the parts layout below. Also upon the chassis wiring diagram. Detector filter is a 0.1
microfarad connected between terminal 1 and the can. Filter number 1 is a 2.0 connected between
terminal 2 and the center stud. Filter number 2 is a 1.0 connected between terminal 3 and the
center stud. Filter number 3 is a 1 connected between terminal 4 and the can. And then the
resonant condenser is a 0.225 connected between terminal 5 and the center stud. So that's going
to be that bad boy right there look at that thing look at it look how beautiful and look
they number the studs one two three four five so it tells you right it kind of reminds me
of how they did the couplet as i call it in some of them so are the yeah see look they're
numbered so that will be interesting is that fuse blown i don't think it is i think it's
just crap i think it's just a crappy fuse look they're brand oh my god oh my god yeah
we gotta clean up a bunch of this i tried and tried and tried to find a picture of the
bottom of this chassis with the wiring so i could see what in the world surely this
isn't factory what did this originally attach to what did this originally attach to um and
i didn't find a thing so that's that but we'll figure all that out all right folks
so i guess that's it for the intro next time like i said we'll take one of these out and
try to meld it open and see what's in it so i hope you enjoyed it we will see you on the
next video
