Send correspondence to: House On the Mend 7582 S Las Vegas Blvd Suite 189 Las Vegas, NV 89123
I would love to read your comments and video requests in the comments below.
The "Heavily Tattooed Mystery Guy" and I would like to apologize to Joe Diffie for butchering his awesome song, "New Way (to Light Up an Old Flame)". please check out the real deal: https://youtu.be/NnU3JS5pznA
Hi, I'm Mike with House on the Mend and in this video we're going to be replacing these loud
old buzzing eight foot long fluorescent bulbs for these deformable LEDs. So let's get going.
If you break it, he will fix it. If you buy it, he will build it. House on the Mend.
So in this garage we have eight eight foot long fluorescent ballasts and each ballast contains
two eight foot long fluorescent bulbs. And the thing about this garage is that the peak
is 17 feet high. Originally this garage was designed to be a basketball court where you
could pull out the vehicles. There would be a basketball hoop over against this wall
and the homeowners designed it to just be a fun place to play ball. That never came to fruition
and the byproduct of such a high ceiling is that the homeowner hasn't been able to do any
maintenance over the years. This is a pretty gentle slope on this peak and so there's no
place to rest a ladder against to get up there and handle those eight foot long fluorescent bulbs.
And so over the years they've come to various states of disrepair. There's only a few that
are working properly. The rest of them, the bulbs are burned out and or the ballasts inside are
worn out and need to be replaced. But when you turn these lights on, as you can hear,
they are really loud. And there is a constant hum that's very distracting.
And the homeowner wants to make a change from this older flickering loud technology to these
new LED lights and that's what we're going to do today. Now to get this job done, since we can't
use the ladder, we're going to have to rent some scaffolding and we're going to set that up now and
get to work.
I'm gonna find me a new way to light up an old flame.
With a little bit of luck and a hug, there's gonna be a big change.
I got a strong desire to start the kind of fire that'll burn through a pouring rain.
I'm gonna find me a new way to light up an old flame.
All right, let's check out what we've got. First of all, if you hear that strange noise in the
background, it's very foreign to us here in Las Vegas. It's rain, but it's a perfect day to be
inside this garage and working. So the lights I purchased came in a two-pack and I paid $52.99
for that two-pack, which is $26.49 a piece. I just looked on the website, here's a screenshot,
and they are now selling on Amazon for singles and they are about $26.55 when you take off the
5% coupon. All right, so we got some nice bubble wrapping and then we've got our two lights here,
one right side up, the other one upside down, and here's what they look like. Just like the
images you see in the Amazon guide, you've got the aluminum heat sinks that look very much like a
transformer head, all the LED lights inside of those, completely movable, and on the back side
here you have the regular socket for a light bulb. It's going to fit right into one of these
Legrand standard socket fixtures. All right, let's talk about the performance of these bulbs
as compared to the ones that are in it now. Here's a picture of the Philips T12 fluorescent bulbs that
are inside these ballasts right now. There are 16 of them, each one 75 watts, so that's a total of
1,200 watts that's cranking out to light this garage. When we're done, we're going to have
eight of these LEDs at 60 watts each. That's only 480 watts, so a huge savings in power consumption.
Now the lumens is a slightly different story. Each one of the T12
8-foot fluorescent lights puts out 4,650 lumens, and there's 16, and when they were all functioning
then they would have been putting out about 74,400 lumens. It's nowhere near that in here
right now because so many of them are burned out and the ballasts are bad, but nonetheless,
quite a bit of brightness when they were originally installed. These LED lights, each one
puts out 6,000 lumens, so there's eight of them, that's 48,000 lumen. That's still going to be
pretty great. As far as the Kelvin rating, the Philips T12 are 5,000 Kelvin, and the LED bulbs
are 6,000 Kelvin, so both of them are pretty white. All right, average life is another big
win for these LEDs. The Philips T12 fluorescent bulbs have an average life of 12,000 hours,
and these LED lights are rated at 50,000 hours, so pretty excited to see how they perform.
All right, as I stated earlier, we're going to be replacing these large ballasts with this
simple little plastic or porcelain, depending on which brand you buy, light fixture. This one here
is a Legrand, and I will leave a link for it in the description. It was only $1.58 each, and they
came much better rated, believe it or not, than the Levitons that had really bad reviews saying
that they were brittle and they were cracking. Now, if we flip this over, you can see a little
bit of what we're going to be doing here once we get up there. We've got two screws here for
the black and two screws right here that are like a silver color. Those are going to be for the white
wires. Now, we're going to have wire coming in and wire going out to the rest of the lights,
right, creating our circuit. So you could twist the wires together and just put them in one,
but these are pretty small screws. I'm not going to do that. I'm going to put one in and one out,
and I'll show you a picture of that. Now, if need be to install these, I'm going to use these nice
anchors for sheetrock. You screw in this white piece here, and then the screw actually goes
right into that. I might just use regular old sheetrock screws if they hold well, but I've got
these just in case. Now, if you look up in the ceiling, you'll see four large circular holes
that have been cut into it, and that is where speakers were supposed to be installed. Nowadays
with Bluetooth technology, you don't really need that. So while we're up there, I'm going to go
ahead and patch those with this bit of kydex. I have several pieces of this white kydex from some
old holster making projects that I used to do. Had it on hand, so I cut it down to 12 by 12 squares,
and we're going to cover those holes while we're up there on the scaffolding to get rid of those
large unsightly holes. So we've got the breaker turned off so that there's no chance we're getting
electrocuted up here as we're taking down this old ballast and rewiring the little receiver for
the new light. So first thing I want to do here is take off these big long bulbs, and they're just
kind of spring-loaded in there. All right, with the lights out of the way, we're going to pull down
these little covers here. They've got these little clips. Go. All right, and that exposes all the
original wiring here. Now we can start removing the screws. I'm holding this light up out of the
camera view. I'm just going to cut around the shielding here just like that. Now let's strip
these. We've got, just like every other light, we've got two black and two white. Now I'm just
curling each of those to get them ready to go around the screws inside the light fixture. I'm
going to back these screws out. So now we're going to take these and we're going to put
white wires to silver, black wires to the brass or gold colored, and it should look just like that.
Good. Now our LED light just screws into place like a normal light bulb, and I'm going to position
these little paddles where the lights are to the most advantageous for this area so we're casting
the most light. All right, moment of truth. Wow, what a difference. Look at how bright these lights
are. Just an amazing transformation. All the walls, everything, just a clean, bright, white
light. Must be what that 6,000 Kelvin rating is. It's just so sharp and crisp in here
and absolutely silent. Let's listen to it again. Do a before and after with sound.
Something also fun is these lights are hooked up to a Leviton smart switch. Alexa,
turn off the garage lights. Okay. So it's been about two months since we installed these lights
and I have to say they are a huge improvement over the fluorescent bulbs that were there previously.
Also quite a value when you consider the cost of replacing the ballasts and the bulbs on every one
of those broken down fluorescent lights. The lighting they put out is very pleasing to the eye
and even if you go from dark to full light there really is no eye pain which was surprising to me.
Now as I looked over the box I found there is no mention of a brand name anywhere so these lights
are quite likely mass-produced in China and then sold on websites such as Alibaba to anyone who
wants to distribute them on places like Amazon or other forums. And if you're wondering whether or
not they're dimmable I searched the box and the pamphlet inside and found no mention of it
anywhere. And considering that's a pretty good selling point I would assume they are not dimmable.
I'm going to leave links to all the components that I used in this video. Now full disclosure
these are affiliate links so if you click on them and end up making a purchase it won't cost you
anything but I do get a small reward at the end of the month. It helps to justify the cost and
the time it takes to make these videos. I'd love to hear your thoughts and be happy to answer any
of your questions in the comment section below. Until next time, thank you for watching.