This Solar Panel is ILLEGAL (except in Utah)

SilkRoad Technology
124 followers
#technology #highend #gadget #robot #apple #iphone #macbookpro #gaming #accessories #gears #samsung #tesla
This might come as a surprise, but these solar panels behind me are giving this house power
through a normal plug and a normal wall outlet.
No complicated wiring required.
The new Utah House Bill 340, signed just a few weeks ago, allows you to take up to 1200
watts worth of solar panels, which is 4 of them, and plug them into a normal wall outlet
to give your house or apartment free power.
This is not an April Fool's joke, it is actually real, and Utah, so far, is the only state
in the USA to allow this kind of plug and play system.
And luckily, I live here.
It's all made possible with this, an EcoFlow Stream Micro Inverter, as well as an EcoFlow
Stream Ultra Battery, and today I'm going to show you how to install it.
For us today to get our 1200 watts of solar, we have 4 panels and we've already laid it
out in the center of the roof.
Lately, instead of needing to find a joist underneath the shingles, companies are moving
more towards a deck mount system where you can put these feet anywhere on the roof without
needing to find a joist.
We're still finding the joists anyway using a hammer and tapping the roof until you hear
something solid, just as like an extra level of, you know, getting more threads into the
wood so they attach a little better.
But technically speaking, you can put these anywhere.
Obviously, since we just put 2 holes in the roof, we're going to put some sealant around
the edges of those bolts.
Luckily, the feet have a little channel so as we inject the sealant into the back, it
goes between and around the holes we just made.
Keeping the shingles watertight.
Here in Utah, the maximum distance between two of the feet is 48 inches, and so we have
two at the end of the panels, and then we just stagger the rest of the feet, lining
up with each of the joists underneath the roof.
The panels themselves aren't very heavy, but since we have a lot of snow here in Utah,
snow loads are pretty important.
And since panels can usually perform above 80% capacity for more than 25 or 30 years,
we want to make sure they're safe.
You might be like, hey Jerry, what if I don't live in Utah and I want to try plugging solar
panels into my wall outlet?
And the answer is, without an electrical meter that can read power going in both directions,
you'll just get billed for the energy you are producing.
Your power bill would increase as if you left an electric oven on all day.
Obviously, as with any electrical project, check your own local laws and regulations
first.
I'm just a guy on the internet.
So we have the micro-inverter on this array, but since the battery also has inputs on the
back, I'll explain more later, we're putting another 3 panels on this side.
We're still staying under that 1200 watts, we just have an extra 3 panels plugging directly
into the battery without touching the grid, just so the battery can stay topped up longer
as the sun is setting, giving us more power into the night.
We have extra panels, but we're not breaking any rules.
The street name for this kind of solar setup is balcony solar, and it's been super popular
in Germany for a while now.
And it's nice to see the USA joining in for the first time.
Now, the hardest part of this whole operation is where to put the solar panels.
Yeah, you could get those foldable solar panels or set up a lawn array, but since we have
roof space at this location, we might as well use it.
With some of my previous solar installations, we would daisy chain the solar panels together,
which works great for a grid-tied system.
Technically, this is also grid-tied.
But since we have the EcoFlow Stream micro-inverter this time around, we have whips, or leads
that extend to each of the panels.
The most important thing though is to hear that little click each time the MC4 is a little
plugged to make the connection.
If I ever need to remove the panels for whatever reason, they can all be taken down pretty
quickly...probably in less than an hour.
Because this whole system is going to be installed through a wall outlet, there is a limit to
how much solar you can install on a single circuit.
Obviously your home wiring is an important factor in this, and if you have an older home,
you definitely want to have a professional come make sure the wires are thick enough
to handle the full 1200 watts.
And since this bill is so new, you do have to have a smart meter that reads the electricity
going in both directions since some of this solar energy will flow back out to the grid.
But I do know that Rocky Mountain Power does that for free and has been preemptively upgrading
everyone's meters for the past 4 years in anticipation of a bill like this.
Another thing to keep in mind is that the Stream micro-inverter, or the Stream Ultra
battery that you'll see in a second, does not take you off grid.
They both have a feature called built-in anti-islanding, which automatically turns themselves off if
it senses the grid power go down.
So this particular solar setup is grid tied, but I do have a video about going off grid
in a city with the EcoFlow Delta Pro Ultra, which you should definitely check out if that's
your thing.
The install of that system is just slightly more complicated.
The Utah price per kilowatt hour is about 14 cents right now, so I'm really only saving
about a dollar's worth of electricity every day, give or take.
But that is $365 a year, which adds up and isn't bad at all.
With no permits or crazy expensive hardware, the return on investment happens much quicker
with this new law, and more importantly, energy independence is priceless.
First panel we install we want to square it up with the rails that we ran earlier.
Some roofs have like fluctuations in the shingles or the plywood that's underneath, and you've
seen that the feet have adjustable height adjustments, so the rails that we installed
earlier are indeed level and flat.
And now we can take the silver end clamps which grab the inside edge of the panel and
pull it tight as we ratchet down that bolt.
Everything on the Snap-N-Rack system which we're using, I'll put a link down in the description,
is a half inch, which is nice because then you only have to have one tool on the roof.
The next one that we're going to install has something called a mid-clamp, and the panels
will just slide in underneath the mid-clamp and we'll sense them down in a second after
we plug it into the micro-inverter.
This is the only panel that does not need leads because it is sitting so close to the
inverter.
If the first panel is lined up pretty square, chances are the rest of the panels will be
too.
If it looks straight, it is straight.
And of course, one of the most important rules of solar panels is that none of the wires
can ever touch the roof, so we use zip ties to keep those wires attached to the rails.
With all the solar panels installed, we could just plug our Stream micro-inverter directly
into the wall at this point and be done.
But EcoFlow did send us over the Stream Ultra battery which will save us some sun juice
to use at night when the sun goes away.
This battery has a 10 year warranty and uses LFP type cells, which means that even after
6,000 cycles, or 16 years worth of use, it will still be at 70% capacity.
Battery technology has come a really long ways recently.
You can also daisy chain up to 6 of these batteries together at the same time, which
would give you 11.5 kilowatt hours of capacity.
And this battery, just like the Stream micro-inverter, plugs directly into a wall outlet, which means
there's no complicated circuit breaker or control panel wiring to worry about, and no
electrician needed...assuming, of course, your house is new enough to handle the load
in the first place.
This is the wire coming from the 1,200 watts of solar on the roof going directly into a
wall outlet.
And if we take a look at the good old app here, jump into the micro-inverter, we can
see that each of the solar panels are outputting, well, around 360 watts in total.
It's plugged directly into the house right now, but I can take the same plug, pop it
into the Stream Ultra, and the power feeds the Ultra which then feeds the house with
the battery in the middle so that when the sun goes down, the house can still have power
to use in the evening and early morning.
Flip this around so we can take a look at the ports on the back.
So obviously we have our solar connections down here.
We have 8 ports in total, which is 4 panels.
This is where we can daisy chain additional batteries together.
This is the micro-inverter in, or they can both be used as power out with the 2 kilowatts
of juice inside the battery, I think it's like 1.9.
And then this right here is the port that also goes out to the wall outlet with two
carrying handles on the side.
And then it's really cool that this light right here on the outside is always visible
to see how much juice you have left in the battery.
These 1200 watts are connected directly to the EcoFlow Stream micro-inverter, and then
we have 3 panels over here which is about 800 watts connected directly to the battery.
Panels on this side are going to get the sun as it rises in the east, and the panels on
this side are going to get the sun as it sets in the west, giving us complete power all
day long, while still being within that 1200 watt Utah limit since the battery is what's
going to be the gateway between the panels and the house.
If we were not installing the battery, we only would have installed this single array.
There you have it.
The easiest solar installation I have ever done.
I for one am a huge fan of Utah's new law, and I'm a huge fan of EcoFlow capitalizing
on it so quickly.
Hopefully someday the rest of the states can enjoy what we're enjoying right now with the
EcoFlow Stream micro-inverter and the EcoFlow Stream Ultra.
I'll leave a link for all that down in the video description.
And thanks a ton for watching.
I'll see you around.
